Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth M7 x 50mm Flat Head Confirmat Screw is a dedicated joinery fastener for cabinet carcass construction and flat-pack furniture assembly. It is designed to drive into a pre-bored stepped confirmat hole, pulling butt joints in particleboard, MDF, and melamine panels together cleanly and repeatably.
A confirmat screw is not a self-starting fastener. It requires a dedicated confirmat step-drill bit that bores a stepped hole combining the pilot, shank clearance, and head countersink in one pass. The blunt point on this screw is part of that system: it drops straight into the pre-bored pilot without walking or deflecting, so the thread engages squarely from the start. This matters in production assembly, where every screw needs to land in the same position across dozens of joints. The large-shank, coarse-thread confirmat profile then draws the panel faces tight and holds them there without loosening through repeated opening and closing of cabinet doors and drawers.
The zinc finish on this screw is appropriate for dry, interior applications: kitchen cabinet boxes, bath vanities, wardrobe carcasses, bookcase and desk construction, and RTA furniture manufacturing. Confirmat screws are driven entirely inside panel joints, so appearance is not a factor; what matters is corrosion resistance sufficient for a stable indoor environment, which zinc provides. The flat head profile with no nibs seats cleanly against the confirmat countersink geometry without additional milling at the head bearing surface.
Cabinet shops and furniture manufacturers use confirmat screws where they need a strong, removable butt joint in engineered panel materials. The M7 x 50mm size is a standard confirmat dimension for 3/4-inch panel stock: the shank length provides solid embedment in the mating panel while the head seats flush in the bored countersink of the top panel. The #3 Pozidriv drive handles power-tool torque without cam-out, which is important when driving a row of joints on the same cabinet box. This box of 100 suits small-shop production runs, millwork teams building site-assembled casework, and installers joining adjacent cabinet units on location.
Yes. The blunt point is designed to seat in a pre-bored confirmat step-drill hole. Drive it into an undrilled panel and it will not self-start. A confirmat step-drill bit sized for M7 screws bores the combined pilot, shank, and head countersink hole in one pass.
Particleboard, MDF, and melamine-faced engineered panels are the primary applications. The coarse confirmat thread is calibrated for the fiber density of these materials. Solid hardwood is not a typical use for confirmat screws.
Nibs mill their own countersink in wood-based materials. A confirmat screw installs into a pre-bored stepped countersink, so underhead milling is not needed. The flat bearing surface without nibs seats squarely against the machined countersink geometry.
Yes. One advantage of confirmat joinery over adhesive or cam-lock fittings is that the screw can be backed out and the joint reopened. Repeated disassembly will reduce the holding strength over time in particleboard, so this is better suited to occasional adjustment than frequent teardown.
No. The zinc finish is rated for dry indoor applications. For humid environments such as an unconditioned garage or exterior application, a more robust corrosion-resistant finish would be needed.
When the job calls for consistent, repeatable butt joints in engineered panel materials, this Würth confirmat screw delivers the alignment, holding power, and drive control that cabinet carcass assembly requires.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176653 Mfr# 0614176653090 10 | #3 x 1" Pozidriv Insert Bit |