Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand side profile for the Blum TANDEMBOX metal drawer system, in a neutral Gray finish, at 550mm (22 inch) nominal length. It is a structural component — the left wall of the drawer box — sold as a single cabinet-member profile for use in new builds or direct replacement of a left-hand side in an existing TANDEMBOX installation.
The TANDEMBOX side profile is the drawer's structure. Unlike a conventional wood box where the sides are shop-cut lumber, the TANDEMBOX profile is formed steel that integrates the running gear and carries the load. This left-hand member spans the left side of the drawer from front to back at the 550mm nominal length. Shops building a full TANDEMBOX drawer need this profile paired with its right-hand counterpart, plus the back panel, front fixing brackets, and locking device for the undermount runner — none of which are included with this single profile. The 550mm length coordinates with all other 550mm TANDEMBOX components: runners, backs, and front fixings of the same nominal length work together as one set.
Gray is a practical, undemanding finish choice for TANDEMBOX profiles in painted or thermofoil cabinet programs. The neutral tone does not compete with white, off-white, or light-colored interiors, and it reads as a background element rather than a design statement. For shops producing high-volume kitchen and bath cabinetry where the drawer interior is rarely the focal point, Gray keeps the build consistent without requiring a finish decision on every order. If the drawer interior is part of the design — for example in open or handle-less kitchens where the drawer face swings fully open and the sides are visible — consider whether the Orion Gray Matte or Stainless Steel finish options better match the intended interior program.
Cabinet shops building complete new drawers typically order TANDEMBOX as full sets or components by nominal length; this individual left-hand profile suits shops replacing a damaged side in an existing installation, sourcing components to complete a partial set, or managing component-level inventory rather than set-level inventory. Designers and contractors specifying TANDEMBOX by component also use this listing to confirm the profile height and finish before placing a set order. The 550mm length and 84mm height must match the nominal length and side height of every other component in the drawer — substituting a different nominal length will not produce a working drawer.
This is the side profile only. The TANDEMBOX runner (undermount slide) is a separate component and must be ordered to match this profile's nominal length and the cabinet's construction type.
Handedness is determined standing at the front of the cabinet looking in: the left-hand profile mounts on the left side of the drawer box. Order one left-hand and one right-hand profile to complete a single drawer's sides.
No. TANDEMBOX profiles, front fixings, locking devices, and backs are engineered for the TANDEMBOX system and are not interchangeable with LEGRABOX, MERIVOBOX, or METABOX components.
The 100 lb rating is the system capacity per drawer (per pair of profiles with the matched runners), not per individual profile.
Confirm the nominal length, side height, and finish match every other component in the drawer set, and this Gray left-hand profile drops into a TANDEMBOX build or repair without complication.
Sold In: 1 Each