Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice 2-Cam Adjustable Face Frame Mounting Plate gives you a hinge base plate designed for face frame cabinetry, so you can set up doors on this cabinet style using a matching Salice hinge system. As a hinge mounting plate in the hinge base plates class, it forms the connection point between the cabinet face frame and the hinge arm, which keeps the door aligned on the frame during everyday use. The 2-cam adjustable design provides two built-in adjustment points at the plate, so an installer can fine-tune hinge positioning relative to the face frame after mounting. This face frame mounting plate is designated by Salice America under manufacturer part number BAU3R19XR, which ties your job planning and reordering to a specific hinge plate geometry. A 1mm plate thickness sets the mounting height reference for the hinge arm, which affects where the door sits in relation to the cabinet opening.
This Salice 2-Cam Adjustable Face Frame Mounting Plate uses a screw-on mounting method, so the plate is attached to the cabinet face frame using screws driven through the plate into the frame material. Because it is a face frame mounting plate, the geometry is arranged for installation on the front frame rails and stiles rather than on a cabinet side panel, which affects where the hinge pivot line ends up relative to the opening. The 1mm specification identifies the plate thickness, setting the setback from the frame surface that the hinge arm must account for as the door is aligned. As part of the hinge base plates product class, this component forms the lower half of a two-part hinge connection, so consistent placement of these plates creates uniform door gaps across a run of cabinets.
The Salice 2-Cam Adjustable Face Frame Mounting Plate, nickel-plated and 1mm thick, is intended for mounting on cabinet face frames, so it supports door hinges in applications where the cabinet front is built with vertical stiles and horizontal rails. By functioning within the hinges and hinge base plates category, it is purpose-built to act as the interface between the cabinet and a compatible hinge arm, so the door load transfers through this base plate into the face frame. The screw-on description means the plate is secured using screws into the wood or similar material of the frame, which lets installers position the plate precisely along the frame member. With a 1mm mounting height, the plate establishes a predictable offset that helps keep door reveals consistent when multiple doors are lined up across a bank of face frame cabinets.
The 2-cam adjustable description on this face frame mounting plate indicates that two separate cam adjustments are built into the plate itself, giving the installer adjustment range at the cabinet connection point. By having cam adjustments at the plate instead of relying only on hinge arm movement, this Salice hinge mounting plate allows refinements to door position using a turning motion on the cams rather than relocating mounting holes. The manufacturer part number BAU3R19XR identifies this exact 2-cam, 1mm, nickel-plated, screw-on face frame plate, which helps installers and shops repeat the same setup when replacing or duplicating a hinge layout. As a Salice America hinge mounting plate, it is aligned with Salice hinge systems, so its setting points are arranged to work within that hinge geometry for repeatable results along a run of doors.
The Salice 2-Cam Adjustable Face Frame Mounting Plate serves face frame cabinets, so it mounts directly to the front frame members instead of to a frameless cabinet side panel.
The 2-cam adjustable feature on this mounting plate provides two cam-based adjustments at the plate, so door alignment can be fine-tuned by turning the cams rather than shifting the plate position.
The 1mm specification on this hinge mounting plate indicates the plate thickness, which establishes the mounting height reference that determines how the hinge arm positions the door on the cabinet.
The Salice 2-Cam Adjustable Face Frame Mounting Plate is nickel-plated, so it presents a nickel-colored metal surface inside the cabinet where hinge components are visible.
This Salice face frame mounting plate is described as screw-on, so it is fastened to the cabinet face frame using screws driven through the plate into the frame material.
Salice manufacturer part number BAU3R19XR refers to this specific 2-cam adjustable, 1mm, nickel-plated, screw-on face frame mounting plate, which links project documentation to the exact hinge base plate.
The Salice 2-Cam Adjustable Face Frame Mounting Plate, nickel-plated and screw-on with a 1mm thickness, offers a defined hinge base for face frame cabinetry where Salice-style hinge systems are used. As a hinge mounting plate in the hinge base plates class, it provides the cabinet-side connection that carries the door and hinge loads into the frame. The 2-cam adjustable design supports on-site door alignment from the plate itself, which helps installers dial in consistent reveals along a row of face frame cabinets. For projects needing a repeatable face frame hinge setup, this Salice America plate under part number BAU3R19XR gives a specific, documented base to build from.
Sold In: 300 Each