Salice 2-Cam Adjustable Face Frame Mounting Plate gives you a hinge base plate designed for face frame cabinet construction, so you can tie your hinge layout directly to a stable, repeatable reference on the frame. As a hinge mounting plate in the hinge base plates category, it forms the connection point between your cabinet hinges and the face frame, which keeps door alignment tied to a consistent mounting geometry. The Salice America branding grounds it in a cabinet hardware line used across woodworking shops, which helps maintain uniformity when you standardize on one hinge program. Its 4mm specification defines the mounting plate height, which sets the door position relative to the frame and supports predictable overlay planning across a run of cabinets.
The manufacturer part number BAU3R49XR clearly identifies this exact configuration, which simplifies reordering the same plate whenever you repeat a successful setup. A nickel-plated finish, called out in the description, provides a clean metal surface at the hinge interface, which supports a professional look inside the cabinet while matching other nickel cabinet hardware components.
This Salice hinge mounting plate is specified as screw-on, which means the plate is fastened to the face frame using screws, allowing a direct mechanical connection from plate to wood that installers are accustomed to in cabinet work. As a face frame mounting plate, it is intended to sit on the frame rather than on a frameless side panel, which aligns the plate geometry with traditional American frame construction and supports consistent hinge positioning in that context. Its 4mm designation defines the plate height in the Salice system, so once you dial in door fit with this plate height, you can repeat that relationship by using the same 4mm plates on additional cabinets within the job.
As a hinge mounting plate in the hinge base plates product class, this component takes the load and alignment duties between the Salice hinge arm and the face frame, which is central to how the door sits and moves. The face frame focus called out in the description means the plate geometry is organized around frame mounting, so your hinge layout references the frame front rather than a cabinet side, aligning with common North American cabinet construction. When you use a plate built for face frames, the screw-on contact area is arranged so the plate seats on the frame, which supports stable registration during layout and installation on wood frames.
The 4mm specification becomes part of your design math for overlay and reveal, because the plate height is one of the fixed dimensions that define how far the door stands off the frame. Once you test and approve a door fit using this 4mm plate, you can keep the same reveal behavior by repeating BAU3R49XR plates on additional openings. The Salice America brand and DOMI SNAP 2CAM FF MPL description place this plate within a defined hinge program, so hinge arms and plates are designed to work within a coordinated system, which helps shops standardize drilling patterns and hardware selections around one family of components.
The 2-cam adjustable description indicates that this plate offers two cam points for adjustment at the mounting plate, which lets you shift door position using cam rotation rather than repositioning screw holes in the frame. That cam-based adjustment supports fine-tuning alignment after the plate is mounted, which is useful when you are correcting small gaps along a multi-door run or aligning doors to adjacent cabinetry. Because the plate is nickel-plated, the finished metal surface at the hinge interface stands up visually inside the cabinet and matches other nickel-plated Salice hinge parts, which keeps the hardware appearance consistent when doors are opened.
The manufacturer part number BAU3R49XR and the SAP description DOMI SNAP 2CAM FF MPL,SCREW ON,4MM identify a repeatable configuration, so when a shop records this part in its hardware lists, the same 4mm, screw-on, 2-cam, face frame plate can be ordered again for future jobs. That consistency matters when you are servicing existing cabinets or expanding a run later, because using the same plate specification helps preserve the original hinge geometry and door positions. As a hinge base plate in the hinges category, this part represents the structural base of the hinge connection on the cabinet, so choosing a consistent model simplifies set-up, drilling jigs, and training for installers who work repeatedly with Salice America systems.
The Salice 2-Cam Adjustable Face Frame Mounting Plate is specified for face frame cabinets, so its geometry is intended to mount directly to the cabinet face frame.
The 4mm height sets the spacing between hinge and face frame, which influences overlay and reveal, allowing consistent door positioning when repeating this same plate on multiple cabinets.
The 2-cam adjustable description indicates two cam points at the plate, letting you fine-tune door alignment by turning the cams instead of relocating mounting screws.
The mounting plate is nickel-plated, giving the hinge connection a uniform metallic finish that matches other nickel-plated Salice hardware inside the cabinet.
The SAP description specifies screw-on, so the BAU3R49XR plate is secured to the face frame using screws for a direct mechanical connection.
The BAU3R49XR manufacturer part number uniquely identifies this 4mm, screw-on, 2-cam, face frame Salice plate, helping shops reorder the same plate for matching installations.
Choose the Salice 2-Cam Adjustable Face Frame Mounting Plate when you need a nickel-plated, screw-on hinge base plate designed for face frame cabinets, with a defined 4mm height and 2-cam adjustment that you can repeat using part number BAU3R49XR.
Sold In: 300 Each