Salice 2-Cam Adjustable Face Frame Mounting Plate defines this part as a hinge mounting plate built for face frame cabinetry, so it gives you a stable base when you are hanging doors on frame-style cabinets. The product class is listed as hinge mounting plates, which means this plate is meant to partner with a compatible hinge arm in a standard two-piece hinge system, keeping the hinge secure on the cabinet side of the installation. The designation face frame mounting plate shows that it is intended for cabinets with a front frame, so you can plan layouts around typical North American framed cabinet construction. The 6mm detail in the description identifies the plate height, helping you hit the overlay and reveal you expect when you select hinges and lay out drilling patterns. The brand listing as Salice America indicates it aligns with Salice hinge systems commonly used in professional cabinet shops.
The term screw-on in the product description identifies how this Salice hinge mounting plate is fastened to the cabinet, so installers can rely on a straightforward screw-driven attachment process on face frames. Because the category lists hinges and hinge base plates and the product class states hinge mounting plates, this plate is intended to occupy the base-plate role under a hinge arm, setting the door pivot point relative to the frame. The 6mm dimension in the name acts as a height reference, so it becomes one of the key factors when you are planning overlay and gap on a run of doors using Salice hinge components. As a face frame mounting plate, it fits layouts where the hinge needs to reference off the front frame rather than a frameless cabinet side.
The category entry Hinges|Hinge Base Plates places this Salice America part directly in the hinge hardware family, so it is suited to cabinet and furniture doors that rely on concealed or semi-concealed hinge systems. The product name calls it a face frame mounting plate, which indicates its role is on cabinets that carry a frontal frame structure rather than frameless boxes, aligning with many residential kitchen or bath lines. The 6mm reference in the product name gives you a fixed mounting height, so when this plate is paired with the appropriate Salice hinge arm, it contributes to achieving consistent overlay from cabinet to cabinet. Since the SAP description uses DOMI SNAP 2CAM FF MPL,SCREW ON,6MM, this part connects to the Salice DOMI SNAP line, giving you a defined plate option within that hinge family when you are standardizing hardware in a shop or production environment.
The description 2-Cam Adjustable Face Frame Mounting Plate states this plate carries two cams, and those cams provide built-in adjustment so you can shift the door position relative to the frame without remounting the plate. By choosing a plate with 2-cam adjustable functionality, a cabinet installer can use the cam movement to compensate for small drilling variances or minor cabinet irregularities while still holding tight margins between doors. The 6mm designation in the product name sets a known mounting height, so it becomes a reliable dimension when you are calculating drilling coordinates and hinge arm selection to achieve the overlay scheme specified in a job plan. Because the finish is listed as nickel-plated, the hardware surface is defined as metallic and uniform, which supports a professional look inside the cabinet when the door is open and the plate is visible alongside other nickel-finished components.
The Salice 2-Cam Adjustable Face Frame Mounting Plate is described as a face frame mounting plate, so it is intended for cabinet constructions that have a front face frame.
The 2-cam adjustable description indicates two cams on the plate, allowing door position to be fine-tuned relative to the frame without relocating the mounting plate.
The 6mm in the product name identifies the plate height, giving installers a known reference when planning overlay and clearances with matching Salice hinges.
The term screw-on in the description shows that this mounting plate is fastened using screws, providing a straightforward installation method on the face frame.
The nickel-plated description defines a metallic finish that presents a clean, uniform look inside the cabinet where the mounting plate may be visible.
The manufacturer part BAU3R69XR uniquely identifies this Salice hinge mounting plate, helping shops reorder the same 6mm 2-cam face frame plate for consistent projects.
The Salice 2-Cam Adjustable Face Frame Mounting Plate, described as a nickel-plated, screw-on, 6mm hinge mounting plate, gives cabinet installers a defined base for Salice hinge arms on framed cabinets. With its 2-cam adjustable description, it offers built-in door-position adjustment at the plate, helping align doors to the face frame within the tolerances expected in professional work. The face frame mounting plate designation and 6mm height detail provide fixed geometry you can factor into overlays and reveals when planning a run of cabinets. For cabinet shops and installers working within the Salice America hinge system, this BAU3R69XR mounting plate provides a clearly specified option to support repeatable layouts.
Sold In: 300 Each