Omega National 42"W Hickory Signature Straight Wall Mount Range Hood, Broan Compatible Liner Included - R2142SMB1HUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2142SMB1HUF1 to RSR2142SMB1HUF1.

Omega National 42 Inch Hickory Range Hood Use

Omega National 42 inch hickory range hood describes a 42 inch wide Signature straight wall mount range hood built in hickory, so it fits a standard 42 inch cooking zone where a wood hood is desired above the range. The flat valance design, called out in the description, creates a straight front profile that suits kitchens needing a simple, linear hood face rather than a shaped or arched profile. Being a wood range hood in the Omega National Signature series, it works with the standard Signature hood chimneys, so installers can match this base hood with the same family of chimneys for consistent style across different widths. The product is identified as a wall mount range hood, so it is intended for mounting directly to the wall instead of an island location, which clarifies where it belongs in a cabinet layout.

Key Working Details Of This Wood Range Hood

• The stated 42 inch width lets this hood span common 42 inch cooking areas, helping align the hood face with upper cabinets for a continuous run across the wall.
• The Signature straight hood design aligns with Omega National Signature hood chimneys, simplifying layout when coordinating hood bases and chimneys in the same project line.
• The flat valance detail produces a straight, flat front edge, giving installers a clean line to align with adjacent cabinet faces or decorative trim pieces.
• The hickory material matches projects that use hickory cabinetry, helping create a unified appearance across doors, frames, and the range hood body.
• The product is classified under wood range hoods, signaling that it serves as the wood decorative shell over the ventilation system in a kitchen installation.

Wall Mount And French Cleat Installation Details

The 42 inch hickory straight wall mount range hood installs using a standard French cleat hanging system, so installers can secure a cleat to the wall and then hang the hood body onto it for a controlled, repeatable mounting process. This French cleat approach supports adjustments during installation, because the hood can be lifted on and off the cleat as alignment is checked against surrounding cabinets and tile. The hood uses standard Signature hood chimneys, so the wall mount position can be coordinated with chimney length to reach the desired height above the cooking surface. Because the ventilation components are Broan compatible through the liner, the wall opening and duct layout can be planned around Broan ventilation dimensions supported by the liner.

Range Hood Application And Installation Workflow

Where This Hickory Signature Hood Fits Best

The Omega National Signature hood chimneys noted in the description show that this 42 inch hickory base is intended for use with the matching Signature chimney components, so it fits best in kitchen layouts built around that coordinated system. Available widths of 30, 36, 42, and 48 inches allow installers to repeat the same Signature straight hood style across multiple cabinet runs, selecting the 42 inch version where a wider cooking surface or wider cabinet opening is present. The wall mount designation means this hood is suited for installations where cabinets and chimney rise from the countertop against a wall, matching typical range-and-cabinet arrangements. As a hickory wood range hood, it is especially suited to kitchens that already use hickory fronts or accents, which helps maintain a consistent wood tone along the entire wall elevation.

Details That Support Broan Ventilation And Alignment

The stated Broan compatible liner plays a central role because it accommodates all Broan ventilation listed in the description, allowing the decorative wood hood body to work with a range of Broan ventilators that fit the liner. This compatibility gives installers flexibility to choose from Broan ventilation models that match their airflow needs while still using the same wood hood shell. The silver metallic liner provides the interface between the cooking area and the ventilation components, helping define the cutout and mounting surfaces for the Broan ventilator inside the wood shell. The web description states that ventilators are not provided with the hood, so installers supply the Broan unit that the liner is built to accept and then set it into the liner for a properly matched assembly. The product is described as installing easily with the standard French cleat hanging system, so once the liner and ventilator are prepared, the hood body can be hung on the wall cleat, which supports straightforward positioning, removal, and re-hanging during final alignment work.

Common Questions About This Omega National Hood

Select This Hood For Broan Ventilation Projects

The Omega National 42 inch hickory range hood combines a Signature straight wall mount design with a Broan compatible silver metallic liner, so it suits projects where a 42 inch wood hood will house Broan ventilation. The standard French cleat hanging system described for this model supports a predictable installation sequence on wall jobs. When a kitchen layout calls for a hickory wood range hood matched to Omega National Signature hood chimneys, this 42 inch version provides the width, mounting style, and ventilation interface defined in the product description.