Omega National 42"W Maple Signature Straight Wall Mount Range Hood, Broan Compatible Liner Included - R2142SMB1MUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2142SMB1MUF1 to RSR2142SMB1MUF1.

Omega National 42 Inch Maple Signature Range Hood Use

Omega National 42 inch maple signature range hood provides a 42 inch wide wood range hood body that defines the focal point over a cooktop while matching maple cabinetry. The flat valance style creates a straight, clean front that suits straightforward, square-edged kitchen designs. As a wood range hood from Omega National Products, it fits into kitchen and bath cabinet layouts where designers specify wood hoods instead of metal shells. The hood is part of the Signature series, so it uses the same standard Signature hood chimneys when a taller vertical run is needed. This Signature family approach lets installers repeat a known layout across 30, 36, 42 and 48 inch widths, so measuring and planning become more predictable from job to job.

Key Maple Signature Hood Details For Projects

• This 42 inch wide Signature hood is part of a line that also offers 30, 36 and 48 inch widths, which supports consistent design across multiple cabinet runs using the same style at different spans.
• The hood uses standard Signature hood chimneys, so one established chimney solution can serve multiple hood widths in this series, reducing layout variables between different cabinet sections.
• A silver metallic liner that accommodates all Broan ventilation is built into the design, so the internal metal surface is ready for Broan ventilation components where Broan units are specified.
• The wall mount hood installs using a standard French cleat hanging system, so installers work with a familiar, repeatable method for lifting and locking the hood onto the wall.
• The flat valance maple construction matches the SAP description, so cabinetmakers can specify a flat-front maple look that aligns with straight rail and stile cabinet doors.

French Cleat Wall Mount Range Hood Setup

This Omega National maple range hood installs using a standard French cleat hanging system, which means the hood body hooks onto a mating cleat fixed to the wall. That mounting style lets installers set the wall cleat height accurately, then lift the hood into place for final alignment. Because the same French cleat method is used across the Signature series, crews can repeat a familiar workflow on 30, 36, 42 and 48 inch versions. The design is a wall mount range hood configuration, so it fits above base cabinets where wall space is available for both the hood body and any Signature hood chimney extensions.

Where This Maple Range Hood Fits Kitchen Work

Using The Signature Hood In Cabinet Layouts

This wood range hood is classified under kitchen and bath cabinet accessories and wood range hoods, so it is intended to integrate into cabinet-based kitchen projects rather than stand-alone metal ventilation shells. The 42 inch width lets it span a wider cooking surface while still aligning with common 42 inch cabinet runs. Because the Signature hood family is available in 30, 36, 42 and 48 inch widths, designers can match this flat valance look across various spans in the same kitchen. The hood uses standard Signature hood chimneys, giving flexibility for vertical runs when upper ceiling height or cabinet design calls for a taller chimney section above the hood body.

The SAP description defines the product as a 42 inch Signature hood with a flat valance in maple, so the visible face presents a straight, flat profile that pairs with flat or simple framed cabinet door styles. As an Omega National Products piece, it aligns with wood-focused kitchen builds that favor a coordinated wood range hood over the cooking zone. Its role in the kitchen is to provide the wood housing around a ventilation system, tying the functional vent area back into the surrounding maple cabinetry for a unified appearance.

Why The Integrated Liner And Cleat Matter

The hood incorporates a silver metallic liner that accommodates all Broan ventilation, so the internal cavity is prepared to receive Broan ventilation solutions without adding a separate liner shell. That integrated liner simplifies the transition from wood exterior to metal ventilation space, giving a clean, metal-lined interior where the Broan components operate. Because the liner is described as accommodating all Broan ventilation, it supports specification of Broan units within the envelope defined by the hood size and series.

The standard French cleat hanging system directly affects installation workflow, since the cleat allows the installer to anchor a relatively small board first and then hang the full hood onto it. That two-part process makes it easier to level the hood body relative to surrounding cabinets and tile, because minor horizontal adjustments can be handled while the hood is resting on the cleat. Using a consistent French cleat system across the Signature hood line lets installation teams follow the same steps for every width, reducing layout variability between different jobs and supporting a steady, repeatable sequence in the field.

Common Questions About This Maple Signature Hood

Selecting This Hood For Broan Ventilation Projects

This Omega National 42 inch maple signature range hood offers a flat valance maple body, a silver metallic liner that accommodates all Broan ventilation, and a standard French cleat hanging system. Those elements work together to support cabinet-focused kitchen projects where a wood range hood is planned over Broan ventilation. When a job calls for a 42 inch wall mount wood hood that coordinates with other Signature widths and uses standard Signature hood chimneys, this model provides that defined combination of dimensions, mounting method, and liner compatibility.