
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
DH Casters swivel caster uses a 2 inch polyurethane wheel and a plate mount to add smooth, controlled movement to material handling carts, office furniture, and store fixtures, so loaded pieces roll easily instead of dragging across the floor. The caster design is swivel type, allowing the wheel to rotate freely so equipment steers in tight spaces where straight-line wheels fight every turn. A built-in brake on the caster wheel locks motion when engaged, holding the unit in place during loading or use. The caster supports a 125 lb load capacity, so light-duty carts and fixtures carry typical loads without overstressing the wheel. Zinc plated finish on the caster components resists surface wear, helping the hardware stay serviceable during regular use in shop and retail environments. As a plate mount caster, it presents a flat mounting surface that suits many standard platforms.
This plate mount swivel caster uses a mounting plate sized at 1-7/8 inch by 2-9/16 inch, giving installers a defined footprint to match on cart bases, furniture bottoms, or fixture frames. With the wheel diameter at 2 inches and tread width at 15/16 inch, this caster creates a compact profile that fits under low-clearance pieces where taller casters would raise working height too far. The swivel design lets the wheel rotate around a vertical axis, so units can change direction without lifting or shifting, which streamlines moves in aisles or tight shop runs. The integrated brake acts on the wheel, so once positioned, the load holds steady during work, stocking, or service.
This DH Casters swivel caster is suited to material handling, office furniture, and store fixture applications, so it serves across shop, commercial, and retail environments. The 2 inch wheel diameter with 15/16 inch tread width keeps equipment compact, which fits under desks, display bases, and small carts without altering ergonomics excessively. Its 125 lb load capacity aligns with light-duty handling tasks such as moving bins, supplies, or small equipment on a few casters. Non-marking polyurethane wheel construction protects finished floors, so fixtures can be repositioned on common office and sales floor surfaces without leaving wheel tracks. The zinc plated finish on the caster body supports day-to-day operation in indoor spaces where the hardware experiences regular rolling use.
The plate size of 1-7/8 inch by 2-9/16 inch defines a consistent mounting footprint, which helps builders lay out matching hole patterns across multiple carts or fixtures for repeat builds. Because this caster is a swivel type with a 2 inch wheel, equipment can pivot smoothly within narrow aisles, reducing the force needed to change direction when loaded. The 125 lb load capacity gives a clear working limit for each caster point, which helps fabricators plan caster counts that keep units within rated loads for repeat service. Polyurethane, non-marking wheel construction reduces floor transfer, which keeps customer-facing areas presentable after repeated fixture moves. The zinc plated finish provides a uniform surface on the metal components, supporting continued swivel and brake function so equipment behavior remains predictable from one move to the next.
The DH Casters swivel caster uses a 2 inch wheel diameter with a 15/16 inch tread width, which creates a compact, low-profile caster that still rolls smoothly under light-duty loads.
This swivel caster has a 125 lb load capacity, which lets builders use it for light-duty material handling carts, office furniture, and store fixtures without exceeding the rated support per caster.
The C-GD20PUSB caster uses a plate mount with a plate size of 1-7/8 inch by 2-9/16 inch, providing a flat mounting surface that suits many cart bases and furniture frames.
This caster is a swivel type with a built-in brake, so it rotates for steering during moves and can be locked to hold carts, furniture, or fixtures stationary during use.
This plate mounted caster uses a polyurethane wheel, which is non-marking and suited to material handling, office furniture, and store fixture use on finished indoor floors.
This 2 inch swivel caster is used in material handling, office furniture, and store fixture applications, helping these pieces roll easily while protecting indoor floor surfaces.
The DH Casters swivel caster with 2 inch polyurethane wheel, plate mount, and brake aligns with light-duty material handling, office furniture, and store fixture projects that demand non-marking movement. With a 125 lb load capacity and 1-7/8 inch by 2-9/16 inch plate size, it fits builds where compact height and defined mounting footprint matter. For projects matching these dimensions, capacity, and applications, this swivel caster provides a clearly specified option for consistent rolling performance.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CCGD20PUR Mfr# C-GD20PUR | DH Casters Rigid Caster With 2" Polyurethane Wheel No Brake, Plate Mount 125lb Capacity - C-GD20PUR | ||||
Sold in: 1 Each | CCGD20PUS Mfr# C-GD20PUS | DH Casters Swivel Caster With 2" Polyurethane Wheel No Brake, Plate Mount 125lb Capacity - C-GD20PUS | ||||
Sold in: 1 Each | CCGD20RR Mfr# C-GD20RR | DH Casters Rigid Caster With 2" Rubber Wheel No Brake, Plate Mount 90lb Capacity - C-GD20RR | ||||
Sold in: 1 Each | CCGD20RS Mfr# C-GD20RS | DH Casters Swivel Caster With 2" Rubber Wheel No Brake, Plate Mount 90lb Capacity - C-GD20RS | ||||
Sold in: 1 Each | CCGD20RSB Mfr# C-GD20RSB | DH Casters Swivel Caster With 2" Rubber Wheel With Brake, Plate Mount 90lb Capacity - C-GD20RSB | ||||
Sold in: 1 Each | CCGD20SR Mfr# C-GD20SR | DH Casters Rigid Caster With 2" Steel Wheel No Brake, Plate Mount 125lb Capacity - C-GD20SR | ||||
Sold in: 1 Each | CCGD20SS Mfr# C-GD20SS | DH Casters Swivel Caster With 2" Steel Wheel No Brake, Plate Mount 125lb Capacity - C-GD20SS |