DH Casters Rigid Caster With 2" Polyurethane Wheel No Brake, Plate Mount 125lb Capacity - C-GD20PUR

DH Casters Rigid Caster For Controlled Moves

DH Casters rigid caster uses a 2 inch polyurethane wheel on a plate mount to give steady, straight-line movement where swiveling is not wanted. The rigid design keeps carts, cabinets, and fixtures tracking predictably, which matters when equipment must stay aligned along aisles or work cells. A zinc plated finish on the caster body provides a clean, uniform surface that stands up well in typical shop and facility environments. The caster is rated at 125 lb load capacity, so it supports small material handling carts, office furniture pieces, or store fixtures within that weight range. A tread width of 15/16 inch spreads the load over more floor area than a narrow wheel, helping the caster roll smoothly on common hard surfaces. The non-marking polyurethane wheel protects finished floors during repeated moves, which is important in offices, retail spaces, and production areas with sensitive flooring.

Key Rigid Caster Details For Daily Use

• The 2 inch wheel diameter keeps overall caster height compact for low carts and furniture while still rolling reliably over typical floor joints and transitions, supporting predictable handling in tight layouts.
• The 15/16 inch tread width gives the polyurethane wheel more contact area, which helps stabilize loads and smooth rolling when equipment is pushed or pulled along straight routes.
• The plate mount design provides a fixed mounting interface that resists side loads, which is useful when fixtures or carts are moved repeatedly along the same path without needing swivel action.
• The zinc plated finish on the caster structure offers a uniform, corrosion-resistant surface in normal indoor shop, office, and retail conditions, supporting long-term appearance and function.
• The non-marking polyurethane wheel construction allows the caster to roll while minimizing floor marks on finished surfaces, which matters for offices, store fixtures, and showroom applications.
• The 125 lb load capacity rating defines the working range for small carts and furniture projects, helping this caster serve light-duty material handling and fixture applications.

Plate Mount Rigid Caster Fit And Dimensions

This plate mount rigid caster uses a mounting plate sized at 1-1/2 inch by 2-21/32 inch, giving a compact footprint that fits smaller frames and furniture bases. The wheel diameter of 2 inches and tread width of 15/16 inch establish the rolling profile, so the caster supports low overall height while still carrying its rated load. The rigid format means the wheel remains fixed in line with the plate, which helps maintain consistent alignment on straight runs for carts and fixtures. With a listed load capacity of 125 lb, this caster fits light-duty tasks where weight per caster falls within that rating. The combination of plate size, wheel width, and diameter lets installers match the caster to narrow bases, office furniture frames, or compact material handling carts that require controlled, straight-line travel.

Using This C-GD20PUR Caster In Real Projects

Where This Polyurethane Plate Caster Performs Best

The C-GD20PUR caster, from DH Casters, is described for applications in material handling, office furniture, and store fixture use, so it suits small carts, rolling cabinets, or display units in those settings. The non-marking polyurethane wheel is valuable on finished office floors, showroom surfaces, and retail aisles because it supports frequent repositioning without creating marks. With a 2 inch wheel diameter and 15/16 inch tread width, the caster fits compact frames, such as under-desk units or slim display fixtures, where larger industrial casters would raise height too much. The rigid configuration is useful when equipment rolls along straight warehouse lanes, office corridors, or store aisles, since the wheel stays aligned with the frame rather than rotating like a swivel caster.

Details That Support Consistent Rolling And Alignment

The zinc plated finish on this rigid caster delivers a protective, uniform surface on the metal components, which supports consistent performance in typical indoor environments found in shops, offices, and retail spaces. The 125 lb load capacity means each caster is designed to handle that load when used within its rating, creating a predictable planning figure when designing light-duty carts or fixtures. The 2 inch polyurethane wheel works with the plate mount to keep the unit compact and steady, so equipment stays low to the ground while still moving smoothly on common hard floor materials. Because the tread width is 15/16 inch, the wheel presents a stable footprint that can help reduce wobble when a cart is pushed in a straight line. The rigid plate mount structure ties these elements together, allowing the caster to keep its direction fixed relative to the equipment frame, which helps reduce corrections when moving items along defined paths.

Common Questions About This DH Casters Model

Select This Caster For Light-Duty Straight Runs

The DH Casters rigid caster with 2 inch polyurethane wheel and plate mount layout offers a compact, straight-tracking solution for light-duty projects. Its 125 lb capacity, non-marking wheel construction, and 1-1/2 inch by 2-21/32 inch plate sizing align well with material handling carts, office furniture frames, and store fixture bases that roll on hard, finished floors. When a project calls for a fixed-direction caster rather than swivel movement, this rigid plate mount option gives a defined wheel path that supports predictable handling in aisles and corridors.