DH Casters Rigid Caster With 3" Polyurethane Wheel No Brake, Plate Mount 220lb Capacity - C-GD30PUR

DH Casters Rigid Caster For Controlled Movement

DH Casters rigid caster with a 3 inch polyurethane wheel provides straight-line rolling where you want equipment to track cleanly, which matters when positioning material handling carts, office furniture, or store fixtures in tight aisles or work areas. The plate mount design means the caster fastens to a flat mounting plate interface, giving a broad contact area that spreads load forces for a stable base under cabinets or mobile fixtures. A rated load capacity of 220 lb lets this caster support moderate equipment weight on a single wheel position, which helps when planning total load across multiple casters on a cart or fixture. The zinc plated finish provides a metallic surface over the caster components, which supports a clean, uniform look that blends with common hardware finishes on shop or retail fixtures.

Key Plate-Mounted Caster Details For Projects

• The 3 inch wheel diameter lets the caster roll over small floor transitions while keeping overall equipment height compact, which helps maintain comfortable working or display heights on carts and fixtures.
• A 1-1/4 inch tread width on the wheel presents a stable contact patch to the floor, which helps distribute the applied load and supports steady tracking under cabinets, office furniture, or small material handling carts.
• The polyurethane wheel type gives a defined tread material at the rolling surface, which helps provide consistent movement characteristics on typical hard interior floors used around shops and retail spaces.
• The plate mount construction matches the plate-mounted casters category, letting the caster bolt to a rectangular plate interface and simplifying layout when aligning multiple casters under a shared base frame.
• A plate size of 2-1/2 inch by 4-7/8 inch sets the footprint for the caster attachment area, which matters when planning bolt hole placement and confirming there is enough flat surface on the cart or furniture base.
• The rigid type design keeps the caster fixed so it does not swivel, which guides equipment to move in straight paths and is useful when paired with swivel casters on the same unit.

Plate Mount Rigid Caster Installation Considerations

The plate mount design on this DH Casters rigid caster sets a clear rectangular mounting zone that aligns well with typical flat steel or wood base plates on shop carts and furniture, which simplifies marking and drilling for attachment. With a plate size of 2-1/2 inch by 4-7/8 inch, the caster covers a moderate footprint, which helps spread vertical and lateral loads where the base frame meets the floor. The 3 inch wheel diameter sets the center of rotation at a predictable height, which helps installers plan leg or base dimensions so multiple casters share the load evenly. A 1-1/4 inch tread width further supports stable contact, which is valuable when positioning fixtures that must roll but still sit securely once in place.

Using This 3 Inch Polyurethane Rigid Caster In Workflows

Where This Plate Mount Caster Fits Best

This plate mount rigid caster with a 3 inch polyurethane wheel is suited to applications specifically called out as material handling, office furniture, and store fixtures, so it aligns well with carts, desks, and display units that follow similar load ranges. The 220 lb load capacity rating for the caster ties directly to how much weight each wheel position can carry, which helps when spacing multiple casters under longer fixtures or heavier carts. Its classification under builders hardware and plate mounted casters positions it naturally in woodworking and shop environments, where cabinet bases and custom fixtures often require mobile support. The zinc plated finish integrates visually with many metal framing systems used in these applications, supporting a consistent appearance on exposed caster frames in office or retail spaces.

Details That Support Consistent Rolling Performance

The rigid type configuration on this C-GD30PUR caster fixes the wheel in a single orientation, which creates predictable straight-line travel that is useful when guiding carts alongside benches, rows of cabinets, or store gondolas. When combined with swivel casters on the opposite end of a cart or fixture, the rigid casters help define the tracking axis, supporting controlled steering and reducing lateral wander along aisles. The 3 inch wheel diameter and 1-1/4 inch tread width define the wheel geometry, which translates into a balance between maneuverability and footprint that suits typical interior floor conditions found in shops and offices. The polyurethane wheel type sets a specific tread material, helping the caster deliver a consistent rolling feel across smooth hard surfaces commonly used under material handling equipment, office furniture, and store fixtures.

Common Questions About This DH Casters Rigid Caster

Selecting This Caster For Material Handling And Fixtures

The DH Casters rigid caster with a 3 inch polyurethane wheel, plate mount, and 220 lb load capacity gives a defined option when specifying plate mounted casters for material handling, office furniture, or store fixtures. With its 2-1/2 inch by 4-7/8 inch mounting plate and rigid tracking behavior, this caster fits projects that need straight-line control along benches, cabinet runs, or store aisles. Matching these verified dimensions and ratings to your cart or fixture layout helps align caster choice with the way the equipment is expected to roll and position in daily use.