DH Caster 3" Plate Mount Rigid Caster, Rubber, No Brake, 125 lb, C-GD30RR

Rigid Caster With 3 Inch Rubber Wheel Use

Rigid caster with 3 inch rubber wheel gives a fixed-track wheel for carts, furniture, or fixtures that need straight-line movement, which helps keep handling predictable in tight warehouse aisles or retail layouts. The DH Casters brand identity on this rigid caster signals it is part of a recognizable plate mounted casters range, which helps standardize hardware choices across different projects. A 125 lb load capacity rating sets a clear working limit for each caster, which helps installers plan safe loads when building material handling carts or store fixtures. The 3 inch wheel diameter paired with 1-1/4 inch tread width creates a compact but stable footprint, which supports smooth travel for lighter-duty applications without taking much floor space under the unit. The rubber wheel type provides a cushioned contact surface, which helps equipment roll more smoothly in typical office furniture and store fixture environments.

Key Plate Mounted Caster Details For Projects

• The plate mount design identifies this caster as a plate mount style, which suits installations where a flat mounting surface is available on the cart or fixture base.
• A plate size of 2-1/2 inch by 4-7/8 inch defines the mounting footprint, which helps installers match the caster plate to existing layouts or new base plates on furniture and fixtures.
• The zinc plated finish on the caster body provides a treated metal surface, which helps the hardware maintain a consistent appearance in visible locations on office furniture and store fixtures.
• The rigid type designation means this caster does not swivel, which keeps movement constrained to straight lines and simplifies control when moving material handling carts in guided paths.
• A 3 inch wheel diameter with 1-1/4 inch tread width defines the wheel envelope, which helps balance maneuverability with stability under lighter loads in general indoor use.

Plate Mount Rigid Caster Fit And Setup

The plate mount classification on this DH Casters unit indicates it fastens using a mounting plate interface, which suits bases designed around flat steel, wood, or composite plates on carts or fixtures. A plate size of 2-1/2 inch by 4-7/8 inch sets the mounting zone needed on the equipment base, which helps installers position multiple casters with consistent spacing and support. The rigid designation confirms the caster frame holds the 3 inch wheel in a fixed orientation, which simplifies layout because the travel direction is set by how the plate is oriented when installed. The 125 lb load capacity figure provides a load planning reference for each caster, which lets builders select an appropriate number of casters to support office furniture or store fixtures within that range.

Using This DH Casters Plate Mount Rigid Caster

Where This 3 Inch Rubber Wheel Caster Fits

The DH Casters rigid caster with 3 inch rubber wheel is identified for applications in material handling, office furniture, and store fixtures, which places it in light-duty to medium-duty rolling equipment across commercial interiors. Using a wheel diameter of 3 inches positions this caster for situations where low overall height is important, which helps keep furniture or fixtures close to their original design height. The 1-1/4 inch tread width supports a modest contact area, which suits narrow cart frames or furniture legs that still require stable rolling support on typical indoor surfaces. The rubber wheel type creates a softer interface than many hard wheel options, which suits movement over common office or retail flooring where gentler rolling is preferred. The plate mounted casters category assignment places this product among other plate-mounted solutions, which helps shops standardize on one mounting style across a range of material handling or display units.

Details That Support Repeatable Caster Results

The rigid type design of this caster locks the wheel orientation relative to the mounting plate, which helps teams achieve repeatable straight-line tracking when casters are mounted in pairs or sets on carts and fixtures. A zinc plated finish on the caster structure provides a consistent surface treatment, which supports a uniform look when multiple casters are used on visible office furniture or store fixtures. The defined plate size of 2-1/2 inch by 4-7/8 inch gives a precise footprint for layout, which helps fabricators drill or cut matching patterns in bases before installing multiple DH Casters rigid plate casters. The published 125 lb load capacity per caster provides a repeatable design parameter, which helps reduce guesswork when building fleets of similar material handling units that must carry comparable weights. The manufacturer part number C-GD30RR clearly labels this specific configuration, which helps purchasing and maintenance teams reorder the same rigid caster with 3 inch rubber wheel for replacements or expansions.

Common Questions About This Rigid Plate Caster

Selecting This Caster For Your Next Build

The DH Casters rigid caster with 3 inch rubber wheel, plate mount, and 125 lb capacity offers a defined combination of type, size, and load rating for light-duty material handling, office furniture, or store fixture work. With a plate size of 2-1/2 inch by 4-7/8 inch and rigid frame design, it suits projects built around straight-line rolling and flat mounting surfaces. For jobs calling for a compact rubber wheel caster in this capacity range, this C-GD30RR plate mounted option from Wurth Baer Supply fits neatly into standardized shop workflows.