DH Caster 2-1/2" Plate Mount Rigid Caster, Rubber, No Brake, 90 lb, C-GD25RR

DH Casters Rigid Caster For Controlled Movement

DH Casters rigid caster with 2-1/2 inch rubber wheel is a plate mount caster designed to carry up to 90 lb, which suits light-duty carts or fixtures where predictable tracking matters. The rigid design keeps the wheel fixed in one direction, so equipment rolls straight along aisles or work cells without wandering. Its rubber wheel construction provides a cushioned roll on hard floors, which helps when moving material handling carts, office furniture, or store fixtures across concrete or tile. The 1-1/8 inch tread width gives a stable contact patch, supporting the rated load without concentrating weight on a narrow edge. As a plate mounted caster, it uses a broad mounting surface instead of a single stem, so load is spread into the frame or base. The zinc plated finish on the assembly offers a protective surface, supporting normal indoor shop and retail environments. The C-GD25RR part number clearly identifies this specific configuration for repeat orders.

Rigid Caster Details That Support Daily Use

• The 90 lb load capacity allows this caster to support light-duty material handling, office furniture, or store fixtures without overloading a single point, which helps maintain smooth rolling under typical small-cart loads.
• The 2-1/2 inch wheel diameter balances low overall height with practical floor clearance, so fixtures stay close to the ground while still rolling over small joints or transitions in common work or retail spaces.
• The 1-1/8 inch tread width spreads weight across a wider footprint, helping the caster carry its rated load while staying stable on flat surfaces during straight-line moves.
• The rubber wheel material offers a compliant running surface against hard floors, which can soften rolling impact and support controlled movement in indoor material handling, office, or store fixture applications.
• The plate size of 2-1/4 inch by 4-7/16 inch creates a larger mounting surface against the equipment frame, distributing forces over more area and supporting secure attachment in plate mount designs.
• The zinc plated finish adds a protective coating to the caster body, which supports appearance and surface protection in shops, offices, and retail floor environments.

Plate Mount Rigid Caster Installation Setup

This plate mount rigid caster uses a plate size of 2-1/4 inch by 4-7/16 inch, so the mounting area on the cart, cabinet, or fixture can be laid out to match that footprint. Because the caster is rigid rather than swiveling, the plate is oriented so the 2-1/2 inch rubber wheel aligns with the desired travel direction, which supports straight-line tracking along aisles or work rows. The 1-1/8 inch tread width provides a clear reference for how much floor contact the wheel will have, useful when spacing multiple casters under a base. With a 90 lb load capacity, installers can plan caster quantity and placement so each caster operates within its rating during normal material handling, office furniture, or store fixture use.

Using This Caster In Material Handling And Fixtures

Where This DH Casters Rigid Caster Fits Best

This DH Casters rigid caster is identified for applications in material handling, office furniture, and store fixtures, so it suits small carts, rolling pedestals, or movable retail displays that follow fixed paths. The 2-1/2 inch rubber wheel works well in these settings because the diameter keeps units low while still providing a rolling surface that crosses typical seams in flooring. With a tread width of 1-1/8 inch, the wheel spreads contact across the floor, useful on smooth concrete or finished surfaces where stability and reduced point loading are important. The 90 lb load capacity defines it as a light-duty caster, aligning with compact fixtures, office units, and lighter material carts that are moved by hand. As a plate mount caster, the 2-1/4 inch by 4-7/16 inch mounting plate integrates naturally into flat steel or wood bases commonly used in these environments, creating a stable support for repeated moves.

Why This Plate Mount Design Supports Repeatable Results

The plate mount construction with its 2-1/4 inch by 4-7/16 inch size distributes force over a larger area of the base, which helps maintain alignment of the rigid caster under load and during frequent rolling cycles. Because the wheel is fixed in orientation, once the caster is positioned with the rubber wheel set to the travel direction, the equipment will continue to track straight, which is valuable for narrow aisles or guided lanes in material handling and retail layouts. The rubber wheel composition works together with the 1-1/8 inch tread width to provide consistent floor contact, which helps maintain grip and smooth rolling as the 90 lb capacity is approached. The zinc plated finish supports the integrity of the caster assembly by adding a surface layer that resists everyday indoor wear, so movement characteristics remain consistent over time in shops, offices, and store environments. The C-GD25RR part number ties these details to a single defined caster, making it easy to match performance when expanding or replacing existing fixtures.

Common Questions About This DH Casters Caster

Selecting This Caster For Light-Duty Mobility

The DH Casters rigid caster with 2-1/2 inch rubber wheel, 90 lb load capacity, and 2-1/4 inch by 4-7/16 inch plate mount offers a defined setup for light-duty mobility. Its rubber wheel, zinc plated finish, and rigid tracking align with material handling, office furniture, and store fixture needs where straight-line movement and low overall height are important. Selecting the C-GD25RR configuration gives a consistent caster specification that can be repeated across new carts, cabinets, or displays requiring similar performance.