DH Caster 4" Plate Mount Rigid Caster, Rubber, No Brake, 200 lb, C-GD40RR

DH Casters Rigid Caster For Controlled Moves

DH Casters rigid caster uses a fixed, non-swiveling design, which keeps carts and fixtures tracking straight when you push or pull them in narrow aisles or along walls. The 4 inch rubber wheel rolls on a 1-1/4 inch tread width, providing a defined contact patch that helps distribute weight and smooth out minor floor irregularities in typical material handling, office furniture, and store fixture applications. Its 200 lb load capacity supports moderate loads, so a set arranged appropriately can carry the weight of cabinets, stock, or displays without overloading a single point. The zinc plated finish on the caster body provides a protective surface, which helps the unit maintain appearance and function over time in indoor shop and store environments. As a plate mount unit, it offers a broad mounting interface that helps spread loads into the base, supporting stable carts, fixtures, and cabinets.

Key DH Casters Rigid Caster Job Advantages

• The rigid design keeps the caster rolling in a straight line, which helps control movement on long runs, along walls, or under fixed store fixtures that should not pivot during use.
• The 4 inch wheel diameter allows the caster to roll over small joints and typical floor transitions, which helps reduce hang-ups when moving material handling carts or office furniture.
• The 1-1/4 inch tread width provides a defined footprint on the floor, which helps balance load support with maneuverability for medium-duty carts and fixtures.
• The rubber wheel material provides compliant contact with hard floors, which helps smooth rolling and reduces harsh vibration on stocked fixtures and office pieces.
• The 200 lb load capacity supports moderate static and rolling loads, which helps planners size casters appropriately for cabinets, displays, or work carts in everyday service.
• The zinc plated finish on the caster body provides a protective metal surface, which helps the assembly resist surface wear during routine use in shops and commercial interiors.
• The plate mount design creates a wider attachment area at 2-3/4 inch by 6 inch, which helps spread forces into the base and supports stable mounting on wood or metal frames.

Plate Mount Rigid Caster Installation Details

This plate mount rigid caster uses a 2-3/4 inch by 6 inch mounting plate, which gives installers a clear footprint to match when laying out bolt patterns on wood or metal bases. The plate mount format creates a broad interface between the caster and the frame, which helps distribute the 200 lb load rating across a wider surface instead of concentrating it at a single point. With a 4 inch rubber wheel and 1-1/4 inch tread width, the installed height and stance support stable rolling for material handling carts, office furniture, and store fixtures. The rigid configuration holds the wheel in line with the plate, which keeps movement predictable once the plate is oriented correctly during mounting.

Using This C-GD40RR Caster In Real Projects

Where This Plate Mounted Caster Performs Best

This DH Casters rigid caster with 4 inch rubber wheel serves material handling, office furniture, and store fixture applications, so it fits well under medium-duty carts, cabinets, or display units that need straight tracking more than tight turning. The 200 lb load capacity gives project planners a defined rating, so they can configure layouts where multiple casters share the overall weight of equipment, inventory, or furniture pieces. The rubber wheel with 1-1/4 inch tread width provides a balanced footprint on common interior floors, so carts roll smoothly under normal loading without digging into surfaces typical of stores or offices. Its plate mount style with a 2-3/4 inch by 6 inch plate suits bases that can accept a rectangular footprint, so fabricators can align the caster with frame members to support long-term use.

Why These Rigid Caster Details Support Repeatable Results

The rigid design of this DH Casters unit locks the wheel orientation to the plate, so once the plate is aligned to the direction of travel, the cart or fixture consistently tracks along that line with every move. The 4 inch wheel diameter contributes to repeatable rolling by clearing debris and minor transitions, so operators experience similar push effort across different interior routes. With its 200 lb capacity, the caster provides a known limit, so repeated installations across a fleet of carts can be specified to carry comparable loads without changing hardware type. The zinc plated finish on the caster body offers a consistent surface condition, so fixtures maintain a uniform appearance across multiple builds and hold up through repeated cleaning cycles common in commercial spaces. Using the 2-3/4 inch by 6 inch plate size across projects standardizes the bolt pattern, so replacement of worn casters or expansion of a fixture line can follow the same hole layout, reducing layout time on follow-up builds.

Common Questions About The DH Casters Rigid Caster

Selecting This Caster For Your Next Build

The DH Casters rigid caster with 4 inch rubber wheel, 200 lb capacity, and 2-3/4 inch by 6 inch plate mount brings defined ratings and dimensions to carts, office furniture, and store fixtures. The rubber wheel, zinc plated finish, and rigid tracking behavior give fabricators a consistent component for repeated builds, fleets, or standardized fixtures. For projects that call for controlled straight-line movement and a plate-mounted footprint, this C-GD40RR caster offers a clear, documented option to specify on your next run with Wurth Baer Supply.