
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
DH Casters rigid caster with 4 inch steel wheel is a plate mounted caster designed for material handling, office furniture, and store fixture applications, so it supports rolling loads in environments that need predictable, straight tracking. The rigid caster design keeps the wheel fixed, which holds a straight path when moving carts or fixtures down aisles or along benches. A wheel diameter of 4 inches helps the wheel roll over typical shop floor transitions while keeping overall equipment height manageable. The 1-1/4 inch tread width focuses the load over a narrower track, which suits tight spaces where wider wheels may interfere with frames or legs. A load capacity of 300 lb rates this caster for light to medium duty carts and fixtures, giving installers a clear working range when planning total rolling capacity across multiple casters on a unit.
This plate mount rigid caster uses a defined 2-3/4 x 6 inch mounting plate, which establishes a consistent interface for welding or bolting to a base frame when setting up carts or fixtures. The rigid configuration holds the wheel in a fixed orientation, so positioning the plate at each corner sets the rolling direction for the entire unit. A 4 inch wheel diameter influences working height, allowing builders to predict how much elevation the caster adds under cabinets, office furniture, or store fixtures. The 300 lb load capacity gives installers a numeric guide when selecting how many casters to place under a platform to support expected rolling weight in service.
This rigid caster with 4 inch steel wheel is specified for material handling, office furniture, and store fixture applications, so it fits typical rolling carts, mobile desks, and movable displays used around woodworking and commercial interiors. The plate mount design aligns with fabricated steel frames or wood bases that present a flat mounting area, allowing builders to size corner pads or rails to the 2-3/4 x 6 inch plate footprint. In material handling use, the 300 lb capacity per caster supports light duty carts that must transport parts, tools, or supplies between work areas. In office furniture and store fixtures, the same capacity supports mobile bases for shelving or desks that need to reposition under load without overbuilding the support frame.
The defined plate size of 2-3/4 x 6 inches helps fabricators drill or weld consistently, so multiple casters sit square on each corner and share the 300 lb rated load evenly in a four-caster layout. The rigid, non-swiveling design keeps each caster locked to its orientation once mounted, which helps long runs of cabinets or fixtures track straight without drift when moved along aisles. The 4 inch steel wheel diameter, combined with the 1-1/4 inch tread width, sets a predictable rolling profile that installers can factor into clearance around base trim, toe kicks, or low cross-members. The zinc plated finish over the steel construction supports a consistent surface appearance across a full set of casters, which matters where base hardware remains visible on office furniture or store fixtures.
The C-GD40SR rigid caster has a 300 lb load capacity, so planners can use this rating when sizing the number of casters needed under a cart, fixture, or piece of office furniture.
This DH Casters rigid caster uses a 4 inch steel wheel with 1-1/4 inch tread width, which sets both the rolling height and the contact footprint on the floor surface.
The plate size of 2-3/4 x 6 inches defines the mounting footprint, so frame corners or base pads can be laid out to that rectangle for consistent alignment and support.
This rigid caster is specified for material handling, office furniture, and store fixture applications, fitting mobile carts, desks, and display bases that roll along set paths.
The C-GD40SR caster has a zinc plated finish, which provides a protective coating on the metal surfaces useful in indoor material handling and furniture environments.
This DH Casters wheel uses a plate mounting type, so it fastens by its rectangular plate to prepared surfaces on carts, office furniture bases, or store fixtures.
The DH Casters rigid caster with 4 inch steel wheel, 2-3/4 x 6 inch plate, and 300 lb load capacity offers a defined mounting footprint for material handling, office furniture, and store fixture work. By matching your frame design to the plate size, desired rolling height, and rated capacity, this plate mounted caster can serve as a straightforward choice for light duty carts and mobile bases handled through Wurth Baer Supply.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CCGD40RR Mfr# C-GD40RR | DH Casters Rigid Caster With 4" Rubber Wheel No Brake, Plate Mount 200lb Capacity - C-GD40RR | ||||
Sold in: 1 Each | CCGD40RS Mfr# C-GD40RS | DH Casters Swivel Caster With 4" Rubber Wheel No Brake, Plate Mount 200lb Capacity - C-GD40RS | ||||
Sold in: 1 Each | CCGD40RSB Mfr# C-GD40RSB | DH Casters Swivel Caster With 4" Rubber Wheel With Brake, Plate Mount 200lb Capacity - C-GD40RSB | ||||
Sold in: 1 Each | CCGD40SS Mfr# C-GD40SS | DH Casters Swivel Caster With 4" Steel Wheel No Brake, Plate Mount 300lb Capacity - C-GD40SS |