DH Casters Rigid Caster With 2-1/2" Steel Wheel No Brake, Plate Mount 180lb Capacity - C-GD25SR

DH Casters Rigid Caster For Controlled Movement

DH Casters rigid caster with a 2-1/2 inch steel wheel is built as a plate mounted caster for applications where you want straight-line movement without swivel. The rigid design keeps carts, furniture, or fixtures tracking in one direction, which helps when guiding loads along aisles or against walls. The wheel diameter of 2-1/2 inches lets the caster roll over typical shop and showroom floor joints while keeping overall height compact for low-profile builds. A tread width of 1-1/8 inches spreads the load across the floor, which supports stable rolling on hard surfaces common in material handling and office environments. The 180 lb load capacity sets a clear working range so this caster can be matched to light-duty and medium-duty carts, office furniture bases, and store fixtures that stay within that rating. With its plate mount design, this caster suits permanent or semi-permanent installations on flat mounting surfaces.

Key Caster Details That Support Your Build

• The zinc plated finish on this caster resists surface wear from normal indoor use, which helps the caster maintain a consistent appearance on visible furniture and fixtures.
• The rigid type construction keeps the wheel from swiveling, which simplifies guiding equipment in straight runs along racking or walls without constant correction.
• The 2-1/2 inch steel wheel diameter lets the caster clear minor floor irregularities, which helps carts and fixtures move smoothly across typical warehouse, showroom, and office floors.
• The 1-1/8 inch tread width concentrates contact on hard surfaces, which supports firm tracking under load on concrete, tile, or similar flooring used in material handling and retail spaces.
• The plate mounting style with a plate size of 2-1/4 inch by 4-7/16 inch offers a broad mounting footprint, which helps distribute forces into the base or frame for predictable performance.
• The 180 lb load capacity defines a working range for light-duty structures, which lets you assign this caster to material handling, office furniture, and store fixture projects that fit that rating.

Plate Mounted Rigid Caster Fit And Setup

This plate mount rigid caster uses a 2-1/4 inch by 4-7/16 inch mounting plate, which provides a defined area for fastening to carts, furniture frames, or fixture bases. The rectangular plate layout suits straight edge framing, which is common on welded carts and wood platforms in shops and retail displays. With a wheel diameter of 2-1/2 inches, the caster sets a predictable ride height, which matters when you are matching multiple casters on a base so it sits level. The 1-1/8 inch tread width supports the wheel on a narrow track, which helps when aligning casters in parallel for straight rolling on hard floors. As a rigid caster, it is often paired with swivel casters on the same unit, where the fixed direction helps control the path while swivel units provide steering at the opposite end.

Using This DH Casters Rigid Caster In Projects

Where This Plate Mount Caster Is Applied

This DH Casters rigid caster is specified for material handling, office furniture, and store fixture applications, which means it is intended for indoor environments where loads are moved over finished floors. In material handling, the 180 lb load capacity supports light-duty carts that move parts or supplies between work areas, keeping weight in a defined range. In office furniture use, the 2-1/2 inch steel wheel and compact plate mount help support mobile pedestals or utility units without adding excessive height. For store fixtures, the zinc plated finish and rigid tracking make it suitable for gondolas or displays that need controlled straight movement for repositioning along aisles.

Details That Support Consistent Caster Performance

The steel wheel construction gives this caster a hard rolling surface, which keeps rolling resistance predictable on smooth concrete, laminate, or tile floors commonly found in shops and retail spaces. The 1-1/8 inch tread width focuses that steel contact area, which helps the caster track cleanly without wandering when aligned properly on the base. With a plate size of 2-1/4 inch by 4-7/16 inch, mounting forces are spread over a larger area than a stem mount, which supports long-term stability on wood or metal bases. The rigid type configuration keeps the wheel aligned with the frame, which is useful when you want the caster to guide the load straight into racks or along counters. The zinc plated finish adds surface protection during routine rolling and repositioning, which supports ongoing service in indoor material handling, office, and retail use where appearance and function both matter.

Common Questions About This DH Casters Rigid Caster

Selecting This Rigid Caster For Your Project

This DH Casters rigid caster with 2-1/2 inch steel wheel, plate mount, and 180 lb capacity ties directly to material handling, office furniture, and store fixture work where controlled straight movement matters. Matching the wheel diameter, 1-1/8 inch tread width, and 2-1/4 inch by 4-7/16 inch plate size to your base lets you build carts and fixtures that roll predictably on hard indoor floors. When your project calls for a rigid plate mounted caster in this load range, this configuration offers a defined set of dimensions and applications to align with your design.