DH Casters Swivel Caster With 4" Rubber Wheel No Brake, Plate Mount 200lb Capacity - C-GD40RS

DH Casters Swivel Caster For Mobile Fixtures

DH Casters swivel caster uses a 4 inch rubber wheel and a swivel plate mount so carts, cabinets, or fixtures roll and turn smoothly in tight shop or retail spaces. The zinc plated finish on the C-GD40RS caster provides a hard-wearing surface on the metal body, which supports the wheel under load while resisting everyday wear from normal material handling use. A 200 lb load capacity gives you a clear rating for how much weight this single caster can support, which helps when sizing casters for material handling carts or heavier office furniture. The rubber wheel works as the contact point with the floor so movement stays controlled on typical hard interior surfaces. Plate mount construction ties the caster to flat frames or bases, which is useful when building or modifying store fixtures or shop carts.

Key Swivel Caster Details For Daily Use

• The 4 inch rubber wheel diameter sets the rolling height and helps move over minor floor transitions, which matters when routing carts or fixtures across thresholds during material handling.
• A 1-1/4 inch tread width on the rubber wheel defines the contact patch with the floor, which helps balance maneuverability with stable tracking for office furniture or store fixture applications.
• The zinc plated finish on the caster body provides a protective metal surface, which helps the swivel and mounting components stand up to routine movement in commercial or shop environments.
• A plate size of 4 inch by 5-1/8 inch creates a broad mounting footprint, which spreads load into the frame or base so the 200 lb capacity can be used effectively on carts or fixtures.
• The plate mount design ties directly into flat mounting surfaces, which fits typical bases on material handling carts, office furniture platforms, and store fixtures where bolt-on plates are common.
• A 200 lb load capacity per caster defines the supported static load, which helps when calculating total support and planning caster count under cabinets, carts, or display units.

Plate Mount Swivel Caster Installation Details

This plate mount swivel caster uses a 4 inch by 5-1/8 inch plate, which sets the required flat area on the frame or base, helping you lay out hole locations on carts or fixtures. The plate mounted design keeps the caster body tight to the mounting surface, which is helpful when height is limited under office furniture or retail fixtures. The swivel type construction allows the caster to rotate as the fixture turns, which lets material handling carts track smoothly without dragging the wheel sideways. The 4 inch wheel diameter determines overall added height and ground clearance, which is important when matching existing caster sizes on replacement jobs.

How This C-GD40RS Caster Works In Practice

Using This Caster On Carts And Fixtures

The C-GD40RS caster uses a rubber wheel with a 4 inch diameter and 1-1/4 inch tread width, which supports smooth rolling for material handling carts across typical indoor floors. In office furniture use, this tread width and diameter combination helps larger desks or equipment stands reposition without gouging hard surfaces under normal loads. The zinc plated finish on the plate and swivel components protects the structural parts that carry the 200 lb capacity, which matters when the caster is used on frequently moved store fixtures. Plate mount construction with a 4 inch by 5-1/8 inch footprint ties solidly into common cart bases, which provides a stable connection when moving stacked materials or stocked shelving. As a swivel caster without a brake, it focuses purely on directional movement, which suits positions where steering and rotation are more important than holding the fixture in place. The 200 lb capacity rating lets the caster serve on medium duty equipment rather than light furniture glides, which supports more demanding shop or retail applications.

Details That Support Consistent Movement And Layout

The plate mounted design of this DH Casters swivel caster standardizes how it attaches to frames, which supports repeatable layout when multiple casters are mounted at matching corners. The 4 inch wheel diameter keeps all casters in a set at the same ride height, which helps cabinets or carts sit level and reduces racking as they roll. A 1-1/4 inch rubber tread width gives each wheel a defined footprint, which spreads the 200 lb capacity across the floor contact area for predictable rolling resistance. The zinc plated finish on the metal components helps preserve the structural parts that carry the wheel and swivel, which keeps movement more consistent over the caster's service life. The swivel type construction allows each caster to align with the direction of travel, which reduces side load on the wheel and helps reduce scuffing during tight turns in aisles or shop rows. The 4 inch by 5-1/8 inch plate size aligns the mounting pattern across similar casters, which assists when standardizing caster placement on a series of carts, office fixtures, or retail displays.

Common Questions About DH Casters Swivel Caster

Selecting This Caster For Your Next Build

The DH Casters swivel caster with a 4 inch rubber wheel, 4 inch by 5-1/8 inch plate mount, and 200 lb capacity gives a clear specification for carts, office furniture, and store fixtures. Match these dimensions and ratings across your layout so the fixtures roll, turn, and sit at a consistent working height.