DH Caster 4" Plate Mount Swivel Caster, Steel, No Brake, 300 lb, C-GD40SS

DH Casters Steel Swivel Caster For Material Handling

DH Casters swivel caster with 4 inch steel wheel is a plate mounted caster designed for material handling, office furniture, and store fixture applications, so it supports carts and fixtures that need to roll smoothly in daily use. The zinc plated finish resists surface wear as the caster works in busy shop and retail environments, helping the wheel and rig maintain a clean, professional look. A 300 lb load capacity allows this caster to carry substantial loads on a single wheel, which supports heavier fixtures or material carts without overstressing the unit. The swivel design lets the caster rotate under load, which helps users maneuver equipment in tighter aisles and around corners. The 4 inch wheel diameter keeps rolling resistance reasonable, aiding movement over typical indoor surfaces in woodworking shops or commercial spaces.

Key Steel Wheel Caster Details For Daily Work

• The 4 inch wheel diameter allows the caster to roll over small floor irregularities, which helps carts and fixtures move more predictably on common indoor surfaces.
• The 1-1/4 inch tread width concentrates the 300 lb load on a relatively narrow track, which helps the steel wheel track consistently along straight runs in shops or aisles.
• The steel wheel construction provides a hard rolling surface, which supports frequent movement under load in material handling and store fixture settings.
• The zinc plated finish on the caster components adds a protective surface layer, which helps the caster tolerate normal indoor environmental exposure in offices or retail floors.
• The plate mount design places the load over a 4 inch by 5-1/8 inch plate, which spreads forces into the mounting surface for stable support of furniture or fixtures.

Plate Mount Swivel Caster Fit And Mounting Use

This plate mount swivel caster uses a 4 inch by 5-1/8 inch plate size, so the mounting interface suits applications built around that footprint on carts, cabinets, or fixtures. The plate mounted casters category places this unit within plate mount builders hardware, which helps installers match it to other similar casters on multi-wheel bases. A 300 lb load capacity defines the working range for each caster, so designers can plan the number of casters needed on material handling carts or office furniture pieces. The swivel type configuration lets the caster rotate under static and rolling loads, which helps fixtures pivot in tight spaces on shop floors or in store layouts. The steel wheel material supports regular rolling under weight, which helps maintain consistent performance in material handling workflows.

How This Swivel Plate Caster Works In Practice

Swivel Caster Use On Carts And Fixtures

This DH Casters plate mount swivel caster is built for material handling, office furniture, and store fixture use, so it fits applications where equipment must roll and pivot throughout the day. The 4 inch steel wheel carries up to 300 lb per caster, which lets builders support loaded carts or display fixtures while keeping movement manageable. With a tread width of 1-1/4 inch, the wheel presents a defined contact path on smooth indoor floors, helping rolling equipment track predictably down aisles. The swivel mechanism allows the caster to rotate when users push or pull equipment, so carts can change direction without being lifted or dragged. By using a steel wheel instead of a softer material, the caster maintains a firm rolling surface under heavier static and dynamic loads in shops or showrooms.

Details That Support Repeatable Mounting Results

The plate mount design on this caster uses a 4 inch by 5-1/8 inch plate, which provides a clear footprint for layout when mounting to wooden bases or metal frames. Because it is part of the plate mounted casters category, the caster aligns with common plate mount patterns used in builders hardware, helping fabricators specify matching casters across a project. The zinc plated finish protects the caster surfaces as they are handled, installed, and rolled in normal indoor environments, supporting consistent appearance across multiple fixtures. The 300 lb load capacity rating per caster gives designers a straightforward value when planning total support on multi-caster assemblies. As a swivel caster without a brake, it is intended for applications where free rolling and turning are needed, so installers can allocate braking functions to other caster positions if desired within the same system.

Installer Questions About This 4 Inch Steel Caster

Select This DH Casters Swivel Caster For Your Build

The DH Casters swivel caster with 4 inch steel wheel, plate mount design, and 300 lb load capacity offers a defined solution for material handling, office furniture, and store fixture projects. The zinc plated finish and 4 inch by 5-1/8 inch plate size give fabricators clear mounting and appearance expectations across multiple bases. By using this C-GD40SS plate mounted caster, builders can specify a consistent swivel unit that supports daily rolling and turning demands in commercial and shop environments.