DH Caster 3" Plate Mount Swivel Caster, Steel, No Brake, 250 lb, C-GD30SS

DH Casters Swivel Caster For Material Handling

DH Casters swivel caster uses a 3 inch steel wheel and a plate mount to support carts and fixtures that need controlled movement in material handling, office furniture, and store fixture applications, which helps keep loads mobile without changing existing layouts.

The zinc plated finish on this swivel caster resists surface wear during normal shop or retail use, which helps the caster maintain a consistent appearance where hardware remains visible on equipment and fixtures.

A 250 lb load capacity on this caster supports medium-duty loads on a single wheel, which lets you plan total cart or fixture capacity by multiplying per-caster rating across typical four-caster layouts in workspaces or sales floors.

The steel wheel with 1-1/4 inch tread width rolls on a narrow contact patch, which helps equipment track predictably on firm, smooth floors common in warehouses, offices, and retail areas.

The swivel design of this caster allows the wheel to rotate around a vertical axis, which lets operators pivot carts and fixtures in tight spaces without lifting or dragging the load.

Key Plate Mount Swivel Caster Details In Use

• The plate mount design on this caster creates a broad mounting surface on the equipment base, which spreads load forces and supports stable attachment to carts, cabinets, or fixtures.
• A wheel diameter of 3 inches lets the caster clear small floor irregularities on typical hard surfaces, which supports smoother rolling when moving equipment across joints or transitions.
• The 1-1/4 inch tread width concentrates load over a modest contact area, which helps the steel wheel start rolling with less initial resistance on clean, level floors.
• The steel wheel construction provides a rigid rolling surface, which supports consistent tracking where precise positioning of material handling carts or store fixtures is important.
• The zinc plated finish on the caster components adds a protective metallic layer, which helps the caster tolerate regular indoor use in woodworking shops, offices, and retail environments.

Plate Mount Swivel Caster Fit And Installation

This plate mount swivel caster uses a plate size of 3-1/8 by 4-1/16 inches, which gives installers a defined footprint to match with the mounting surface on carts, cabinets, or fixtures.

The rectangular plate shape allows oriented placement at corners or mounting pads, which helps keep casters aligned so rolling loads track square to the chassis and resist unwanted skewing.

With a 250 lb load capacity per caster, this unit can be positioned at four corners of a platform, which supports building balanced rolling bases sized to the expected weight of materials or furniture.

The swivel feature lets the caster rotate freely around a vertical axis during installation tests, which allows installers to check how far the wheel sweeps within the footprint of the equipment base.

The steel wheel and 1-1/4 inch tread width create a clear rolling line, which helps installers visualize path clearance around floor guides, thresholds, and adjacent fixtures in the work area.

How This C-GD30SS Caster Works On The Job

Where This 3 Inch Steel Wheel Caster Fits

This 3 inch steel wheel caster is specified for material handling, office furniture, and store fixture applications, which positions it for use on carts, chairs, cabinets, or display units that must roll on firm indoor floors.

The plate size of 3-1/8 by 4-1/16 inches fits bases with enough flat area at each corner, which suits welded frames, wood platforms, or casework bottoms commonly found in woodworking and fixture projects.

A zinc plated finish supports use in shops and commercial interiors, which suits equipment and fixtures that are moved frequently yet remain visible to staff or customers.

The plate mount design works where installers can access the underside of the base, which matches typical fabrication workflows when building mobile platforms or retrofitting stationary units.

The 250 lb capacity rating allows this caster to serve in medium-duty roles on equipment that carries tools, components, or merchandise, which aligns with common demands in woodworking shops and retail spaces.

Why Swivel Plate Details Support Reliable Rolling

The swivel action on this DH Casters swivel caster lets the wheel change direction under load, which reduces side drag when operators turn loaded carts in aisles or near machinery.

The steel wheel construction resists deformation under the 250 lb rated load, which keeps the rolling radius consistent and supports predictable maneuvering during repeated moves.

A tread width of 1-1/4 inches limits floor contact, which helps the caster pivot more readily when changing direction, useful where operators reposition fixtures frequently during layout changes.

The defined plate size of 3-1/8 by 4-1/16 inches allows installers to lay out consistent bolt patterns, which supports repeatable mounting across multiple carts or fixtures in the same project.

The zinc plated finish on the caster hardware withstands typical indoor exposure in material handling and furniture environments, which reduces the visual impact of handling marks over time.

The DH Casters C-GD30SS designation provides a clear reference for reordering, which enables maintenance teams to match existing casters when expanding fleets or replacing worn units.

Common Questions About This Swivel Plate Caster

Choose This Caster For Plate Mounted Mobility

The DH Casters swivel caster with 3 inch steel wheel, plate mount, and 250 lb capacity offers a defined plate size and zinc plated finish, which supports straightforward mounting and dependable rolling for material handling, office furniture, and store fixture projects.