DH Caster 3" Plate Mount Swivel Caster, Rubber, With Brake, 125 lb, C-GD30RSB

Swivel Caster With 3 Inch Rubber Wheel For Mobile Use

Swivel caster with 3 inch rubber wheel gives you a compact wheel diameter that rolls easily in tight spaces, which helps when maneuvering carts, office furniture, or fixtures around existing installations. The 1-1/4 inch tread width on the rubber wheel focuses the load on a controlled contact area, which keeps movement predictable on typical shop or retail floors. A zinc plated finish on the caster resists everyday wear in normal material handling and office environments, so the appearance stays consistent on visible fixtures. The caster is rated for a 125 lb load capacity, so it handles light-duty material handling, office furniture, and store fixture applications where loads are modest and weight is distributed across multiple casters. This caster design supports installations where smooth rolling, basic corrosion resistance, and manageable load ratings all need to work together.

Key Caster Details That Support Daily Rolling Tasks

• The zinc plated finish on this caster provides a protective surface that resists typical corrosion in indoor settings, which helps the hardware maintain function and a clean look on carts and fixtures over time.
• The swivel type design allows the caster to rotate as the equipment turns, which lets users change direction smoothly in aisles or tight workspaces without dragging the wheel.
• The 3 inch wheel diameter balances low overall height with practical rolling performance, keeping platforms closer to the ground while still clearing small floor irregularities common in shops and offices.
• The 1-1/4 inch tread width gives the rubber wheel a stable footprint, which supports steady rolling and helps distribute weight across the floor contact area on light-duty loads.
• The rubber wheel material provides a cushioned roll compared to harder wheels, which can help equipment move more smoothly across typical interior floors used in material handling and office environments.
• The stated applications of material handling, office furniture, and store fixture use align this caster with light-duty, mobile installations that need regular repositioning without excessive load stress.

Plate Mount Swivel Caster Setup And Fit Details

This caster uses a plate mount design, so it installs by attaching the plate directly to the underside of the cart, furniture base, or fixture. The plate size of 3-1/8 x 4-1/16 inches defines the footprint you match to your mounting surface, which helps when laying out hole locations on new builds or replacements. The swivel configuration allows the wheel assembly to pivot under the plate during movement, so the equipment tracks naturally as it is pushed or pulled. The integrated brake on this caster lets the installer add holding capability at the mounting points, which supports situations where a cart or fixture needs to stay in position during use.

Using DH Casters Swivel Caster In Real Installations

Where This Plate Mounted Caster Works Best

This caster is described for material handling, office furniture, and store fixture applications, so it fits light-duty carts, mobile desks, and display units that need to roll on typical interior floors. The 125 lb load capacity aligns with installations where the total weight is shared across multiple casters, which suits smaller platforms and fixtures rather than heavy industrial carts. The plate mount construction and 3-1/8 x 4-1/16 inch plate size match bases that offer a flat mounting area, such as cabinet-style carts or framed platforms. Because the wheel is a 3 inch rubber design with a 1-1/4 inch tread width, it supports rolling under moderate loads without excessive height gain, which is useful when keeping work surfaces at a target elevation.

Details That Help Maintain Alignment And Control

The swivel action of this caster lets the wheel rotate freely under the plate as direction changes, which helps users guide equipment around corners and through aisles without binding. Its 3 inch wheel diameter defines the turning radius and overall caster height, which matters when matching existing units so multiple casters share the same rolling plane. The 1-1/4 inch tread width provides a defined contact patch for the rubber wheel, which supports stable tracking and predictable resistance as loads move. The integrated brake gives the installer a way to hold the wheel position at the mounting point, which is valuable on office furniture and store fixtures that need to stay put during use. The zinc plated finish supports long-term function by resisting routine indoor moisture and handling, which keeps the swivel and brake components performing consistently in everyday service.

Common Questions About C-GD30RSB Caster Details

Selecting This Swivel Caster For Light-Duty Mobility

The DH Casters swivel caster with 3 inch rubber wheel, plate mount, integrated brake, and 125 lb capacity ties together maneuverability and control for light-duty material handling, office furniture, and store fixture projects. Matching its 3-1/8 x 4-1/16 inch plate, swivel action, wheel size, and rubber tread to your design aligns the caster height, load capacity, and rolling feel with the demands of your mobile equipment.