DH Casters Swivel Caster For Material Handling
DH Casters swivel caster uses a 3 inch polyurethane wheel in a plate mount design to support mobile fixtures that need smooth rolling under a defined load. The 220 lb load capacity lets one caster carry significant weight, which helps when setting up small carts or office furniture bases that need predictable support per corner. The swivel type construction allows the caster to pivot under the load, so fixtures can change direction without dragging, which reduces strain on the structure and floor during regular movement.
The zinc plated finish on the caster body provides a treated metal surface that resists everyday shop and store environments, so the caster maintains function and appearance under frequent use. A tread width of 1-1/4 inches gives the wheel a defined contact area, which helps spread the load on hard surfaces and supports controlled rolling in material handling and store fixture applications.
The plate mount construction with the specified plate size ties the caster solidly to flat mounting surfaces, so fabricators can build repeatable layouts across carts, cabinets, or fixtures that match the plate footprint. The DH Casters branding and C-GD30PUS part number give buyers a consistent reference for reordering, which supports long-term standardization across projects.
Key Plate Mount Caster Details For Projects
- The 3 inch wheel diameter sets the ride height for the caster, which helps installers plan overall equipment clearance and align multiple casters so carts or fixtures sit level across all corners.
- The 1-1/4 inch tread width on the polyurethane wheel defines the contact patch on the floor, which supports controlled rolling performance when moving loads in material handling or office furniture settings.
- The 220 lb load capacity rating indicates how much weight a single caster is designed to carry, which helps planners calculate total support when using multiple casters under a cart, cabinet, or store fixture frame.
- The plate size of 3-1/8 x 4-1/16 inches provides a set mounting footprint, which simplifies layout of bolt patterns on bases and lets builders repeat that pattern across different projects using the same caster.
- The swivel type configuration allows the caster to rotate around a vertical axis, which lets operators steer and reposition fixtures in tight areas without lifting or dragging the base structure.
- The polyurethane wheel material defines the rolling surface characteristics, which supports smooth movement on typical hard floors used in warehouses, offices, and retail spaces.
Plate Mount Swivel Caster Installation Considerations
This plate mount swivel caster uses a defined 3-1/8 x 4-1/16 inch plate, so installers can lay out their mounting pattern around that footprint when designing cart corners or furniture bases. The 3 inch wheel diameter sets a predictable overall height from mounting plate to floor, allowing builders to coordinate this caster with others of the same size for level installations. The tread width of 1-1/4 inches focuses the load into a controlled track, which matters when positioning casters near edges or obstructions under a frame.
The swivel design lets the caster pivot as the load changes direction, which reduces side loading on fasteners and mounting plates during use. The zinc plated finish on the metal components contributes to a stable mounting surface over time, supporting long-term alignment at the plate-to-frame interface in typical indoor environments.
Using The C-GD30PUS Caster In Real Projects
Where This DH Casters Swivel Caster Fits Best
The DH Casters swivel caster with 3 inch polyurethane wheel is specified for applications such as material handling, office furniture, and store fixtures, so it suits carts, desks, or display units that must roll within those environments. The 220 lb load capacity gives each corner of a fixture a defined weight rating, which supports planning for small to medium loads in shop and retail settings without oversizing hardware.
The plate mount style connects directly to flat structural members, which works well with welded frames, wood platforms, or fabricated panels where a rectangular plate footprint can be laid out. The 3 inch wheel diameter balances compact overall height with adequate obstacle negotiation on typical indoor floors, so fixtures maintain a manageable profile while still rolling over minor thresholds or floor joints.
Polyurethane wheel construction shapes how the caster interacts with hard surfaces commonly found in warehouses, office areas, and sales floors, supporting consistent rolling behavior in those locations. The 1-1/4 inch tread width provides a defined track under the load, which contributes to predictable steering when multiple swivel casters are used together on a four-point base.
The zinc plated finish ties into the visual and functional needs of visible fixtures, such as store displays or office furniture, where exposed hardware benefits from a uniform metal appearance. Being part of the DH Casters line gives specifiers a recognizable source when standardizing casters across multiple projects, aiding in repeat builds and straightforward replacement planning.
Why These Caster Details Support Repeatable Results
The specific plate size of 3-1/8 x 4-1/16 inches allows fabricators to create jigs or templates for drilling, which speeds production of multiple bases that all accept the same caster model. The predictable 3 inch wheel diameter lets designers calculate overall unit height accurately, keeping work surfaces, shelves, or display tops at consistent elevations when several fixtures share the same caster specification.
The 220 lb capacity per caster supports straightforward load calculations by multiplying the rating across the number of casters on a unit, helping builders align design loads with caster selection. The swivel configuration ensures that each caster can rotate under changing load directions, which helps reduce scrubbing on floors when maneuvering fixtures through aisles and around corners.
The polyurethane tread paired with 1-1/4 inch width guides how the wheel tracks in straight and turning movements, supporting smoother handling for frequently moved carts or displays. Zinc plated construction contributes to ongoing structural integrity of the mounting components in normal indoor conditions, which supports long-term alignment between the caster plate and the frame it is fastened to.
The defined C-GD30PUS manufacturer part number aids in documentation and reordering, which maintains consistency across maintenance cycles when swapping casters on existing equipment. The specified applications of material handling, office furniture, and store fixtures create a clear performance context, helping specifiers match this caster to environments that reflect the intended use range.
Common Questions About The DH Casters Swivel Caster
What wheel size does the C-GD30PUS caster use?
The C-GD30PUS caster uses a 3 inch wheel diameter, which sets the rolling height and helps coordinate overall equipment clearance when designing carts or furniture bases.
How much load can each DH Casters swivel caster carry?
This DH Casters swivel caster has a 220 lb load capacity, allowing planners to size the number of casters on a unit according to expected total weight.
What mounting style does this polyurethane wheel caster use?
The caster uses a plate mount design with a 3-1/8 x 4-1/16 inch plate, which suits flat mounting surfaces on carts, cabinets, or fixture frames.
Where is this plate mount swivel caster typically used?
The plate mount swivel caster is specified for material handling, office furniture, and store fixture applications, fitting common rolling needs in those environments.
What material is the wheel on this DH Casters unit?
The wheel on this DH Casters unit is polyurethane, which shapes how it rolls on typical hard floors in warehouses, offices, and retail spaces.
What finish is used on the C-GD30PUS plate caster?
The C-GD30PUS plate caster has a zinc plated finish, supporting a consistent metal surface suitable for visible shop and store fixtures.
Selecting This C-GD30PUS Caster For Your Build
The DH Casters swivel caster with 3 inch polyurethane wheel, plate mount construction, and 220 lb load capacity provides defined parameters for carts, office furniture, and store fixtures using flat mounting bases. The 3-1/8 x 4-1/16 inch plate footprint, zinc plated finish, and 1-1/4 inch tread width work together to support repeatable layouts and predictable rolling behavior in material handling and retail environments. Use the C-GD30PUS designation when aligning your drawings, purchase lists, and future replacements to this specific caster configuration.
