DH Caster 2" Plate Mount Rigid Caster, Rubber, No Brake, 90 lb, C-GD20RR

DH Casters Rigid Caster For Material Handling

DH Casters rigid caster with 2 inch rubber wheel is a plate-mounted caster designed for controlled straight-line movement in material handling, office furniture, and store fixture applications. The rigid construction keeps the wheel tracking in a fixed direction, which helps keep carts, bases, and fixtures moving predictably in tight layouts or aisle runs. Its rubber wheel design supports rolling over common shop and office floor surfaces while helping grip the floor during movement. The caster is rated for a 90 lb load capacity, so each unit can carry moderate loads while supporting small carts, cabinets, or fixtures built for regular repositioning. The plate mount style creates a flat, stable connection at the base of your project, tying the wheel into a broad footprint. This DH Casters unit is part of the plate mounted casters class, giving installers a compact, job-ready option when a small but durable caster is needed.

Key Plate-Mounted Caster Details That Matter

• The zinc plated finish provides a protective surface on the metal body, which supports a clean look and helps the caster stand up to typical indoor shop and furniture environments over repeated moves.
• The rigid type construction locks the wheel in a straight orientation, which simplifies guidance for carts and fixtures that always move in one direction along walls, aisles, or work cells.
• The 2 inch wheel diameter keeps overall height low, which suits compact furniture bases and low-profile fixtures that must stay close to the floor while still rolling when repositioned.
• The 15/16 inch tread width gives the rubber wheel enough contact area for stable rolling, which supports safer movement of material handling carts and office furniture on smooth floors.
• The plate size of 1-1/2 inch by 2-21/32 inch offers a small mounting footprint, which works well on narrow rails or tight base frames where larger plates would interfere with design clearances.
• The 90 lb load capacity rating defines how much weight one caster is designed to carry, which helps plan total caster count for material handling, store fixture, or furniture projects.

Plate Mount Caster Fit And Mounting Considerations

This plate mount rigid caster uses a 1-1/2 inch by 2-21/32 inch plate, giving installers a clear target area for mounting to wood, metal, or composite bases sized to accept that footprint. The plate style spreads load through multiple fastener points, which helps resist racking forces when carts or fixtures are pushed or pulled in straight runs. With a 2 inch rubber wheel and 15/16 inch tread width, the caster maintains a compact profile while still rolling smoothly under its rated 90 lb capacity. The zinc plated finish on the caster body supports a consistent appearance across multiple units, useful when lining up several casters under office furniture or store fixtures where visible hardware needs a uniform look.

Using This C-GD20RR Caster In Real Projects

Where This DH Casters Rigid Caster Works Best

This DH Casters rigid caster with rubber wheel is suited to material handling setups where straight-line travel is preferred, such as moving carts along defined paths between storage and work areas. In office furniture, the compact 2 inch wheel diameter helps keep pedestals, printer stands, or low credenzas at a comfortable working height while still allowing them to roll for cleaning access or layout changes. For store fixtures, the plate mounted design ties directly into base frames, supporting displays that must move in and out of aisles without swivel movement changing orientation. The 90 lb load capacity per caster gives fixture builders and shop fabricators flexibility to support light to moderate loads by using multiple units under each piece. The rubber wheel construction supports smooth rolling on common indoor floors while helping the fixture maintain traction during controlled moves.

Why These Caster Details Support Repeatable Results

The rigid wheel type limits movement to a fixed direction, which helps operators guide carts and fixtures reliably without steering drift on long pushes. The 2 inch wheel diameter and 15/16 inch tread width balance clearance and stability, so projects stay low to the floor yet still roll reliably in use. The 1-1/2 inch by 2-21/32 inch plate gives fabricators a consistent drilling and layout pattern from piece to piece, speeding repeat builds and repairs across a facility. The zinc plated finish contributes to visual consistency when several casters are installed in visible positions on office or retail pieces. The 90 lb rated load capacity provides a clear design parameter, allowing builders to calculate support needs for each cabinet, cart, or fixture and keep weight distribution within the caster design range. Together, these details help reduce rework and support predictable motion across multiple installations using the same C-GD20RR caster.

Common Questions About The C-GD20RR Caster

Selecting This Rigid Caster For Your Next Build

The DH Casters rigid caster C-GD20RR combines a 2 inch rubber wheel, 90 lb load capacity, and compact 1-1/2 inch by 2-21/32 inch plate mount to support controlled straight-line movement on material handling carts, office furniture, and store fixtures. When a project calls for a low-profile plate mounted caster with predictable tracking and a zinc plated finish, this rigid model provides a focused option for builders and installers planning repeatable, movable bases.