
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
DH Casters wheel with 2-5/16 rubber wheel gives you a dedicated rolling element designed as a wheel in the Builders Hardware caster accessories category, so it fits jobs where you need to keep an existing caster setup and just address the rolling surface. The wheel construction as a rubber wheel focuses the load on a resilient tread, which matters when you want smoother rolling along a defined path compared to a bare metal contact point. The product class as a wheel separates it from complete casters, so it works where the bracket or yoke stays in place and only the wheel is replaced during repair work. The DH Casters brand and W-ROL12B part number give a consistent identifier, which is useful when repeating a configuration across several gates or fence runs on a project.
The ROLLER,2.31 X12, W/BOLT V-GROOVE,RUBBER description ties this wheel to bolt-based mounting, so it works where a bolt axle runs through the wheel hub as part of the gate or fence hardware layout. The V-groove profile is intended to sit on an angle iron track, which lets the gate or fence ride within the groove rather than straddling a flat bar and reduces tendency to slip sideways during travel. The rubber wheel material contacts the metal track with a cushioned interface, which matters in installations where repeated rolling along the same angle iron section is expected over time. The wheel format as a caster accessory supports projects where the installer retains existing mounting plates or brackets and focuses work on aligning the wheel within the running track.
The web description lists applications as gates, fences and angle iron track, so the wheel is directed at sliding structures that rely on a guided rolling path. The V-groove geometry is paired with that angle iron reference, which positions the groove profile to nest over the angle iron edge and keep the wheel aligned as the gate or fence moves. The rubber wheel material works with these applications by providing a defined tread that rolls against steel angle, so the structure can travel along the full length of the track without relying on sliding contact between metal faces. The product class as a wheel means it integrates into an existing caster or rolling assembly on these structures, letting the main frame and mounting hardware stay in service while the wheel handles contact with the angle iron track.
The ROLLER,2.31 X12, W/BOLT V-GROOVE,RUBBER description gives you a bolt-based wheel that centers the load through its hub, which helps keep the gate or fence weight carried along the track rather than off to the side. The V-groove configuration presents a shaped channel to the angle iron track, so the same alignment repeats every time the gate cycles open and closed. The rubber wheel surface interacts with the angle iron as the rolling element, which supports consistent travel along the same wear path on the track without the structure dragging on supporting posts. The identification as a caster accessory lets installers match this wheel to similar DH Casters components on multi-panel or multi-gate setups, supporting a uniform rolling feel from one section of fencing to the next.
The DH Casters W-ROL12B wheel functions as a wheel in the Builders Hardware caster accessories category, providing the rolling element within a larger caster or gate support assembly.
The W-ROL12B wheel is described for applications in gates, fences and angle iron track, so it serves sliding structures that roll along a defined metal track path.
The W-ROL12B V-groove focuses contact on the angle iron edge, helping the wheel stay guided along the track and supporting straight-line travel for the connected structure.
The W-ROL12B rubber wheel provides a resilient rolling surface against the track, which supports smoother movement for gates or fences compared with metal-on-metal sliding contact.
The ROLLER,2.31 X12, W/BOLT description indicates a wheel intended for use with a bolt through the hub, so it works within bolt-mounted caster or gate hardware designs.
The W-ROL12B wheel is classified under caster accessories, meaning it serves as the wheel component within broader caster or rolling hardware assemblies on gates and fences.
The DH Casters W-ROL12B wheel with 2-5/16 rubber wheel and V-groove is focused on gates, fences and angle iron track, so it fits projects built around a guided rolling path. The product class as a wheel in the Builders Hardware caster accessories category positions it for use where the supporting structure, brackets, and overall layout already exist and the rolling surface is the targeted component. Selecting this wheel lets installers and fabricators apply a consistent DH Casters part across multiple track-guided openings, keeping the rolling behavior similar from one section to the next.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CCWROL12 Mfr# W-ROL12 | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL12 | ||||
Sold in: 1 Each | CCWROL3 Mfr# W-ROL3 | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL3 | ||||
Sold in: 1 Each | CCWROL3B Mfr# W-ROL3B | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL3B | ||||
Sold in: 1 Each | CCWROL6 Mfr# W-ROL6 | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL6 | ||||
Sold in: 1 Each | CCWROL6B Mfr# W-ROL6B | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL6B |