DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL6

DH Casters Rubber Wheel For Gates And Track

DH Casters wheel with 2-5/16 rubber wheel is a rubber v-groove wheel from DH Casters designed as a wheel component in caster and track setups. As a dedicated wheel in the builders hardware and caster accessories category, it serves applications on gates, fences, and angle iron track, so it fits directly into common sliding or rolling gate layouts. The rubber wheel body provides a cushioned running surface on the v-groove, which helps the wheel track smoothly along angle iron. The welded v-groove construction forms a defined running channel in the wheel, guiding the wheel on the angle iron track. The 2.31 x 6 size noted in the description indicates the wheel is sized for heavier-duty runs, giving installers a component that suits substantial gate and fence movements. The W-ROL6 designation identifies this exact wheel for repeat jobs or matching existing hardware.

Key Wheel Details For Gate And Track Use

• The SAP description "ROLLER,2.31'X6',WELDED V-GROOVE,RUBBER" specifies a 2.31 x 6 welded v-groove rubber wheel, giving installers a clearly defined size and groove type when matching to existing angle iron track.
• The web description notes applications on gates, fences, and angle iron track, so the wheel is suited to rolling movements along metal track in typical exterior or perimeter hardware layouts.
• The product is identified as a wheel in the caster accessories class, meaning it functions as the rolling element in a larger assembly where the wheel must support guided travel along a track.
• The brand listing as DH Casters provides a consistent source reference, which supports repeat ordering when matching a prior installation or replacing a worn wheel in an existing DH Casters setup.
• The W-ROL6 manufacturer part number ties directly to the welded v-groove rubber wheel configuration, reducing selection errors when specifying wheels for standardized gate and fence runs.

W-ROL6 Wheel Fit For Angle Iron Track Systems

The W-ROL6 welded v-groove rubber wheel is described for use on angle iron track, so the v-groove is shaped to ride on the edges of angle iron commonly used as a guide rail. The welded v-groove in the rubber wheel helps the wheel nest against the track profile, promoting consistent tracking along straight runs. Because the applications call out gates and fences, the wheel is suited to the back-and-forth motion these systems see in regular use. The 2.31 x 6 size designation signals a larger wheel format, which supports smoother travel over longer tracks compared with very small wheels. As a wheel component in the builders hardware and caster accessories category, it fits into assemblies where guided motion along angle iron is required.

Using This DH Casters Wheel In Real Projects

Where This Welded V-Groove Rubber Wheel Fits

The web description states that this DH Casters wheel with 2-5/16 rubber wheel is used on gates, fences, and angle iron track, so its primary role is supporting sliding or rolling movement in those structures. In a gate layout, the welded v-groove follows the profile of the angle iron track, helping the gate move in a controlled line without drifting off the rail. For fence sections that roll for access, the same v-groove geometry keeps the wheel centered on the track. The 2.31 x 6 sizing from the SAP description places the wheel in a range suited to substantial panels rather than very light-duty doors, which matters when planning track runs across driveways or wide openings.

The product class as a wheel in caster accessories clarifies that this component serves as the rolling element within a broader hardware arrangement. In practice, that means the wheel carries the load along the angle iron track while other structural components handle mounting and support. Because the rubber wheel incorporates a welded v-groove, it combines a defined tracking path with a rubber running surface, providing guided contact with the angle iron edges along the length of the movement.

Why The W-ROL6 Details Matter For Consistent Travel

The manufacturer part number W-ROL6 uniquely identifies this welded v-groove rubber wheel, which matters when matching to existing installations that already rely on this specific profile and size. Using the same W-ROL6 wheel keeps the v-groove alignment and rubber running characteristics consistent across multiple points on the same track run. The SAP description listing "ROLLER,2.31'X6',WELDED V-GROOVE,RUBBER" ties the part number directly to both the wheel measurements and the welded groove style, so the dimensional and groove characteristics remain predictable from job to job.

Applications described as gates, fences, and angle iron track also indicate the type of movement and support this wheel is built to handle. In these environments, the welded v-groove defines the engagement with the angle iron edge, promoting repeatable motion every time the gate or fence section is rolled. The rubber construction described in the product data provides the contact surface that meets the track, supporting a controlled interface along the metal rail. When installers specify a wheel from the builders hardware and caster accessories category with this v-groove and size, they are selecting a component designed around guided motion along angle iron track.

Common Questions About The W-ROL6 Caster Wheel

Selecting This Wheel For Gate And Fence Track Runs

The DH Casters wheel with 2-5/16 rubber wheel, identified as W-ROL6, offers a welded v-groove rubber wheel sized 2.31 x 6 for gates, fences, and angle iron track. When a project calls for a wheel dedicated to guided motion along angle iron, this builders hardware wheel provides a defined v-groove profile and rubber running surface built for track-based movement. For jobs that match these applications and dimensions, selecting this W-ROL6 wheel aligns the rolling component with the described gate and fence use.