
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
DH Casters wheel with 2-5/16 rubber wheel gives installers a dedicated wheel from the DH Casters line for projects that call for a compact rubber rolling surface. The product class is Wheel, so it serves as the rolling component in a caster-related setup where a separate mounting arrangement is already in place. The SAP description lists this unit as a welded V-groove rubber design, which means the tread is formed with a V-shaped groove to track along an appropriate mating surface. That welded V-groove detail keeps the wheel centered on compatible angled running surfaces, which supports more predictable travel along a set line. The wheel sits in the Builders Hardware category under Caster Accessories, placing it in the supporting parts group for caster-based assemblies in shop-built or site-built layouts. The manufacturer part number W-ROL12 uniquely identifies this specific DH Casters wheel for ordering and reordering on recurring jobs.
The SAP description for W-ROL12 specifies a welded V-groove rubber wheel, so the running surface is shaped to nest into an angle iron track for guided travel along that metal profile. The 2.31"X12" sizing reference in the description provides a dimensional cue that helps layout crews plan the relationship between wheel, track, and supporting structure in a gate or fence run. Because the wheel is called out for angle iron track applications, it is meant to roll within that profile rather than across a flat plate, which gives installers a defined path for the gate or panel to follow. Placing this DH Casters wheel where the V-groove and angle iron track meet allows the assembly to roll along a repeatable line that resists lateral wandering during operation.
The SAP description labels W-ROL12 as "ROLLER,2.31"X12",WELDED V-GROOVE,RUBBER", and the web description lists applications for gates, fences, and angle iron track, so the wheel is aimed squarely at sliding or rolling boundary elements that travel along a metal guide. When a gate or fence line relies on angle iron track to define its path, the welded V-groove rubber wheel seats into that angle, with the V-groove aligning to the track edges to establish a guided running channel. That fit between the V-groove and angle iron track keeps the rolling element located within the track profile, which helps hold the gate on course when it is opened or closed along the same line each time. Because the product class is Wheel under Caster Accessories, W-ROL12 fills the role of the rolling contact point in a broader hardware assembly rather than acting as a stand-alone hinge or support, so it suits jobs where track-based movement is part of the design.
The DH Casters wheel with 2-5/16 rubber wheel is described as a welded V-groove rubber unit, meaning the running surface is both grooved and rubber-faced to work in angle iron track while maintaining a consistent line of contact. That welded V-groove keeps the wheel centered relative to the track angle, which supports repeatable, straight movement over the full travel length of a gate or fence section. In practice, that centered tracking reduces side drift along the run because the groove edges bear against the angle iron, maintaining alignment as loads move back and forth. The 2.31"X12" sizing reference in the SAP description gives fabricators a consistent wheel dimension to design around, which simplifies duplicating multiple openings or matching an existing run to the same wheel specification by ordering W-ROL12 again when another similar assembly is required.
The W-ROL12 wheel is described for applications involving gates, fences, and angle iron track, so it is meant for sliding or rolling boundary elements that travel along a defined metal guide.
The W-ROL12 welded V-groove rubber wheel uses its V-shaped groove to ride in a matching angle iron track, helping keep the wheel centered and guiding movement along the track.
The 2-5/16 rubber wheel description, reflected as 2.31 in the SAP data, signals the wheel dimension that installers use when planning clearances and track geometry in a gate or fence project.
The W-ROL12 is listed as a Wheel in the Caster Accessories category, so it serves as the rolling part within a larger caster or track-based hardware setup for builders hardware projects.
The welded V-groove rubber W-ROL12 wheel is tailored to ride in angle iron track, with the groove guiding alignment along the metal angle for consistent gate or fence travel.
The web description states that the DH Casters W-ROL12 wheel is sold in both broken and full box quantities, supporting small jobs or larger multi-opening runs under the same part number.
The welded V-groove rubber construction and 2.31"X12" sizing in the W-ROL12 description identify this DH Casters wheel as a fit for gates, fences, and angle iron track assemblies that rely on guided rolling movement. When a project calls for a wheel that rides inside an angle iron track rather than over a flat surface, the V-groove profile on this Wheel class component helps keep the assembly aligned along its route. Using the manufacturer part number W-ROL12 ties future orders to the same welded V-groove rubber wheel, supporting consistent performance across matching openings and long-term work with the same gate or fence layout pattern.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CCWROL12B Mfr# W-ROL12B | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL12B | ||||
Sold in: 1 Each | CCWROL3 Mfr# W-ROL3 | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL3 | ||||
Sold in: 1 Each | CCWROL3B Mfr# W-ROL3B | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL3B | ||||
Sold in: 1 Each | CCWROL6 Mfr# W-ROL6 | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL6 | ||||
Sold in: 1 Each | CCWROL6B Mfr# W-ROL6B | DH Casters Wheel With 2-5/16" Rubber Wheel, - W-ROL6B |