DH Caster 8" Plate Mount Swivel Caster, Thermoplastic, With Brake, 500 lb, C-MHD8TPSB

Swivel Caster With 8 Inch Thermoplastic Wheel

swivel caster with 8 inch thermoplastic wheel defines this DH Casters unit as a heavy-duty option for material handling carts and equipment. The 8 inch gray TPR wheel diameter and 2 inch tread width support movement over typical warehouse and shop floors while helping distribute load across a wider contact area. A 500 lb load capacity rating lets a single caster carry substantial weight on platform trucks, flatbed carts, containers, automotive equipment, distribution carts, and other warehouse equipment. The integrated brake on this swivel caster allows the wheel to be held in place when positioning or loading a cart, which supports more controlled handling at the jobsite or in a facility. A swivel design lets the caster rotate to follow the direction of travel, helping maneuver longer or heavier carts through aisles and around obstacles with less effort.

Key Caster Details For Demanding Cart Use

• The caster is designed above industry standards, which supports demanding service on material handling equipment where higher loads and frequent movement are expected.
• Full double ball heat treated raceways manage swivel motion under load, helping the caster turn smoothly when changing direction with weight on the wheel.
• Double-welded legs strengthen the fork structure, which helps the caster withstand side forces when carts are pushed, pulled, or pivoted in tight spaces.
• The nut-and-bolt kingpin secures the swivel assembly, providing a serviceable connection that supports long-term use in repetitive material handling routes.
• Zinc plating provides a protective finish on metal components, which helps resist environmental effects in typical shop and warehouse environments.
• Zerk fittings for grease service the bearings, allowing lubrication of moving parts so swivel and wheel rotation can stay consistent under regular use.

Plate Mount Swivel Caster Setup And Fit

This DH Casters swivel caster uses a plate mount design, aligning with the Plate Mount product class and Plate Mounted Casters category for equipment that accepts a top plate. The plate size of 3-15/16 inch by 4-1/2 inch defines the mounting footprint, helping installers match the caster to carts and equipment that share this bolt pattern area. A wheel diameter of 8 inch raises cart decks to a working height suited for clearance over floor joints and common shop transitions. The 2 inch tread width balances footprint and maneuverability so carts remain stable without feeling sluggish when turned. By combining a swivel type with a plate mount, this caster is suited for carts that need both directional flexibility and a secure, fixed mounting interface on their frames.

Using This DH Casters Swivel Caster In The Field

Where This 500 lb Plate Mount Caster Performs

This DH Casters swivel caster is specified with applications that include platform trucks, flatbed carts, containers, automotive equipment, distribution carts, and warehouse equipment, so it fits directly into common material handling setups. The 500 lb load capacity per caster supports heavy loads on multi-caster carts, allowing installers to configure equipment for bulk movement of parts or supplies. Its gray TPR wheel material provides a thermoplastic rubber tread suited to indoor use where the wheel type matters. A non-marking wheel designation indicates the tread is intended to avoid leaving marks on finished floors, helping protect surfaces in warehouses, shops, and automotive environments. The 8 inch wheel diameter works on many floor conditions found in these facilities, helping carts roll over small debris and expansion joints. Being part of the Plate Mounted Casters category, this caster suits equipment that relies on a stable top plate connection rather than a stem, contributing to consistent alignment on heavier carts.

Why These Swivel And Brake Details Matter

The swivel type of this caster allows the wheel to rotate around a vertical axis, which lets carts pivot and change direction more easily in aisles and around machinery. Full double ball heat treated raceways support that swivel motion under load, helping the caster track smoothly when operators turn a fully loaded truck. The integrated brake works with the wheel assembly so carts can be held stationary during loading, unloading, or parking, which supports safer positioning on flat warehouse floors. Double-welded legs tie the fork structure together, which helps resist twisting forces during sharp turns or when carts encounter minor obstacles. The nut-and-bolt kingpin centralizes the swivel joint, giving the caster a defined pivot point suited to repetitive directional changes. Zerk fittings at the bearings allow grease to be applied directly where movement occurs, supporting consistent swivel and wheel rotation during extended operation. Zinc plating on metal parts provides a treated exterior that stands up to contact with typical shop contaminants, aligning with the everyday conditions found around platform trucks and distribution carts.

Common Questions About This Plate Mounted Caster

Selecting This Caster For Material Handling Carts

The DH Casters swivel caster with 8 inch gray TPR wheel, brake, and 500 lb load capacity aligns well with platform trucks, flatbed carts, containers, automotive equipment, distribution carts, and warehouse equipment that use a 3-15/16 inch by 4-1/2 inch plate mount. Its plate mounted casters classification, full double ball heat treated raceways, double-welded legs, nut-and-bolt kingpin, zinc plating, and zerk fittings support regular movement and positioning work in industrial and shop environments. For carts or equipment that benefit from a non-marking wheel and controlled swivel with braking, this caster offers a defined set of specifications to match against the job demands.