DH Caster 10" Plate Mount Rigid Caster, Polyurethane Foam, No Brake, 350 lb, C-NF10312RR

DH Casters Rigid Caster For Heavy Rolling Loads

DH Casters rigid caster with 10 inch polyurethane foam wheel is designed to support rolling loads up to 350 lb, so carts and equipment stay mobile without overloading the hardware. The rigid caster type keeps movement in a straight line, which matters when guiding food service equipment, film and movie gear, or cargo containers through tight aisles. The air-free Never br Flat polyurethane foam wheel construction eliminates air-filled tire issues, so the wheel keeps its shape while providing extra cushion on uneven surfaces. A 3-1/2 inch tread width spreads the load across a broader contact area, which helps equipment track steadily over floors. The plate mount design gives a solid mounting interface on carts or frames, using the 3-15/16 inch by 4-1/2 inch plate size for predictable bolt layout.

Key Caster Details That Support Daily Use

• The 350 lb load capacity rating sets a clear limit for how much each caster can carry, which helps match the caster count to the total weight of food service equipment, film and movie equipment, or cargo containers.
• The 10 inch wheel diameter raises equipment higher off the floor, which helps the caster roll over minor floor transitions commonly found around kitchens, studios, and loading areas.
• The 3-1/2 inch tread width on the air-free Never br Flat polyurethane foam wheel provides a wider footprint, which spreads weight and helps equipment feel more stable while being pushed.
• The plate size of 3-15/16 inch by 4-1/2 inch defines the mounting surface area, which gives fabricators a consistent reference when designing or drilling mounting plates on carts or frames.
• The rigid caster type holds the wheel in a fixed direction, which simplifies straight-line movement for equipment that is pushed along defined paths or into storage positions.

Plate Mount Caster Fit For Carts And Frames

This plate mount rigid caster uses a plate size of 3-15/16 inch by 4-1/2 inch, giving a defined mounting footprint for welding or bolting to carts and frames. With a 10 inch wheel diameter, the caster sets a predictable equipment height, which matters when aligning food service equipment, film and movie equipment, or cargo containers to docks, counters, or other gear. The 3-1/2 inch wide air-free Never br Flat polyurethane foam tread presents a stable contact patch, which helps equipment track straight when multiple casters are mounted in line. The 350 lb load capacity per caster provides a clear basis for planning caster quantity on custom-built or retrofitted equipment.

Never Flat Polyurethane Wheel Performance In Use

Where This Plate Mounted Caster Works Best

This caster is identified for applications on food service equipment, film and movie equipment, and cargo containers, which ties its design directly to commercial carts and mobile frames in kitchens, sets, and handling areas. The air-free Never br Flat polyurethane foam wheel construction provides extra cushion and support, which helps when rolling over hard surfaces around these environments. With a 10 inch wheel diameter and 3-1/2 inch tread width, the caster supports movement over floor joints and slight irregularities while spreading load across a wider footprint. The rigid caster configuration suits equipment that travels mainly in straight paths, such as carts moving from prep zones to serving lines or containers rolled along corridors.

Details That Support Repeatable Rolling Performance

The air-free Never br Flat polyurethane foam design maintains wheel function without air, which keeps rolling performance consistent even as equipment cycles between loaded and unloaded conditions. The 350 lb load capacity rating per caster gives builders a numeric basis for distributing weight, which supports repeatable performance across identical carts or dollies. The 3-15/16 inch by 4-1/2 inch plate mount defines a fixed interface, which simplifies replicating mounting hole patterns across multiple units. The 10 inch wheel diameter sets a uniform working height, which helps align equipment surfaces when several casters are used together on the same frame. The rigid caster type keeps the wheel locked to one direction, which gives predictable handling for operators pushing heavy equipment along regular routes.

Common Questions About This DH Casters Model

Selecting This Caster For Equipment Mobility

The DH Casters rigid caster with air-free Never br Flat polyurethane foam wheel, 10 inch diameter, and 3-1/2 inch tread width combines height, footprint, and cushioning for controlled rolling. With a 350 lb load capacity and 3-15/16 inch by 4-1/2 inch plate mount, it brings clear numbers to planning mobile food service equipment, film and movie equipment, or cargo container projects. For carts or frames that roll in straight paths and benefit from stable tracking, this plate mounted caster aligns with practical mobility demands.