DH Caster 10" Plate Mount Swivel Caster, Polyurethane Foam, With Brake, 350 lb, C-NF10312RSB

DH Casters Swivel Caster For Mobile Equipment

DH Casters swivel caster with 10 inch polyurethane foam wheel with brake is a plate-mounted caster designed to carry up to 350 lb, so it supports medium-duty carts and equipment where controlled movement and dependable load handling matter on the job.

The air-free Never Flat polyurethane foam wheel delivers extra-cushion and support compared to a solid wheel, which helps equipment roll more smoothly while still resisting flats in daily use.

The swivel design lets the wheel rotate around a vertical axis, so carts can turn and maneuver in tighter spaces common around food service equipment, film and movie sets, and cargo staging areas.

The integrated brake on this caster lets the wheel be held stationary after positioning, which helps keep loaded equipment steady when operators need it to stay put during service, loading, or camera setups.

Its plate mount construction ties the caster to a mounting plate interface, creating a broad connection to the equipment frame that spreads the 350 lb rating and supports stable rolling and braking performance.

Key Never Flat Caster Details For Daily Use

• The air-free Never Flat polyurethane foam wheel is built to avoid air loss while still providing extra-cushion and support, which keeps equipment mobile without downtime from tire inflation tasks during regular operation.
• The 10 inch wheel diameter raises equipment higher off the floor than smaller casters, which helps the wheel bridge minor floor transitions and surface irregularities that are often present around food service, film, and cargo handling areas.
• The 3-1/2 inch tread width spreads the load over a wider contact patch, which supports the 350 lb capacity and helps the wheel track more predictably when pushing or pulling gear in and out of work zones.
• The double-row ball bearing swivel raceway is engineered to carry the swivel load through two rows of bearings, which helps the caster rotate more smoothly under weight and reduces steering effort when turning loaded equipment.
• The zinc plated swivel raceway provides a protective metallic finish on that component, which helps the key rotating interface resist wear from normal environmental exposure where equipment such as food service carts and cargo containers operate.
• The plate mount type connects to equipment with a rectangular plate interface, which creates a rigid connection and helps keep the caster aligned square to the frame for more consistent tracking and braking performance.

Plate Mount Swivel Caster Fit And Details

This plate mount swivel caster uses a plate size of 3-15/16 inch by 4-1/2 inch, so it matches equipment frames designed around that footprint and helps distribute the 350 lb load across the mounting surface.

The plate mounted design places the swivel and brake structure directly above the wheel, which keeps the load centered over the 10 inch Never Flat polyurethane foam tread and supports steady movement when carts are pushed, pulled, or rotated.

The caster belongs to the plate mount product class, so it integrates into applications that are already set up for plate-mounted casters rather than stem or bolt-through styles found on different equipment types.

The swivel type designation identifies this caster as one that rotates around a vertical axis, which allows the wheel to turn in any direction and helps operators position food service equipment, film and movie gear, or cargo containers more accurately in confined working areas.

Using This Never Flat Caster In Real Work

Applications Around Food Service, Film, And Cargo

The web description specifies this caster for food service equipment, so its 10 inch air-free Never Flat polyurethane foam wheel and 350 lb capacity support rolling loaded service carts and similar units through typical kitchen and prep areas where mobility is important.

Its use on film and movie equipment means the swivel design and extra-cushion from the polyurethane foam wheel help crews move lighting, grip, or other rolling rigs around sets, with the wheel construction supporting consistent travel where flat-free performance matters.

Listed applications also include cargo containers, so the plate mount design and 3-1/2 inch tread width work together to support maneuvering container dollies or carts under load, with the 350 lb capacity helping handle typical weight ranges in staging and handling spaces.

The air-free Never Flat wheel type is built to avoid traditional pneumatic flat issues, which is valuable in these commercial environments because carts and equipment can stay in service without wheel air checks as they move between prep, production, and storage locations.

The swivel caster construction with brake allows equipment in food service, film, and cargo use to be rolled into position and then held using the brake, which is practical when gear must stay steady while tasks like plating, filming, or loading are performed nearby.

Design Details That Support Repeatable Movement

The double-row ball bearing swivel raceway distributes swivel forces across two bearing rows, which improves how the caster starts and continues rotation under load and helps operators guide heavy food service, film, or cargo equipment with less turning resistance.

The zinc plated swivel raceway protects the swivel assembly with a metallic coating, which supports consistent rotation over time in environments where carts roll through areas with moisture or cleaning routines common to food and equipment handling facilities.

The 10 inch wheel diameter paired with the 3-1/2 inch tread width gives the caster a larger rolling envelope, which stabilizes the wheel as it travels over thresholds and small debris often encountered near loading areas or temporary film locations.

The air-free Never Flat polyurethane foam composition supplies extra-cushion compared to rigid wheel types, which moderates the transfer of small floor irregularities into the equipment and supports steadier handling when moving sensitive film gear or loaded food service carts.

The 350 lb load capacity rating defines the working range for each caster, which helps planners size caster quantity for equipment weight so the rolling and braking characteristics remain predictable when carts or containers carry their typical operational loads.

The manufacturer part number C-NF10312RSB uniquely identifies this DH Casters swivel caster configuration, which helps maintenance teams and buyers consistently match wheel type, diameter, tread width, plate size, and brake function when they need to select the same caster again.

Common Questions About This DH Casters Caster

Select This Caster For Verified Never Flat Mobility

The DH Casters swivel caster with 10 inch air-free Never Flat polyurethane foam wheel, 3-1/2 inch tread width, and 350 lb capacity provides a defined combination of load rating, plate size, and brake function that supports carts and equipment in food service, film, and cargo applications.

Its plate mount design, double-row ball bearing swivel raceway, and zinc plated swivel raceway create a consistent interface for maneuvering and holding equipment, so selecting this C-NF10312RSB caster keeps wheel type, dimensions, and application alignment matched to existing installations.