DH Caster 10" Plate Mount Swivel Caster, Polyurethane Foam, No Brake, 350 lb, C-NF10312RS

DH Casters Swivel Caster For Heavy-Duty Mobility

DH Casters swivel caster uses an air-free Never Flat polyurethane foam wheel to support rolling loads in demanding environments where downtime from flats is not acceptable. The 10 inch wheel diameter with 3-1/2 inch tread width rolls over typical floor transitions while distributing weight to protect surfaces. A 350 lb load capacity rating defines how much weight each caster can carry, guiding layout for carts or equipment frames. The swivel type design allows equipment to turn and maneuver in tighter spaces, which helps when positioning food service equipment, film and movie gear, or cargo containers. The plate mount construction ties the caster into a flat steel frame or base, giving fabricators a solid interface. Double-row ball bearing swivel raceway supports the turning action, so the caster tracks predictably under load for steady handling.

Key Caster Details That Support Daily Use

• The air-free Never Flat polyurethane foam wheel avoids air loss, so carts stay mobile without flat-related interruptions and continue to provide extra-cushion and support under load.
• The 10 inch wheel diameter with 3-1/2 inch tread width helps the caster roll over small debris or floor joints while spreading load contact to reduce concentrated wear on surfaces.
• The plate mount style with 3-15/16 inch by 4-1/2 inch plate size provides a defined footprint, simplifying layout of matching mounting pads or plates during fabrication.
• The 350 lb load capacity gives a clear per-caster rating, allowing installers to plan total support by selecting the correct number of casters for the equipment frame.
• The swivel type construction lets equipment change direction easily, which is useful when moving food service equipment, film and movie equipment, or cargo containers in tight back-of-house or on-set spaces.
• The zinc plated double-row ball bearing swivel raceway resists corrosion and supports smooth rotation, which aids consistent steering feel over repeated moves.

Plate Mount Caster Fit And Installation Details

This plate mount caster uses a 3-15/16 inch by 4-1/2 inch mounting plate, giving installers a specific flat area to integrate into equipment bases. The defined plate size makes it straightforward to match to pre-drilled plates or design new mounting plates with proper spacing for this caster footprint. The swivel design concentrates turning forces through the double-row ball bearing raceway, so the mounting plate can stay flat while the caster rotates below. With a 10 inch diameter wheel and 3-1/2 inch tread width, clearance beneath the frame can be estimated for ramps or thresholds. The 350 lb load capacity per caster helps determine both plate thickness and reinforcement needed around the mounting area to support expected service loads.

Using This Never Flat Caster In Real Applications

Where This 10 Inch Caster Works Best

This caster is identified for applications such as food service equipment, film and movie equipment, and cargo containers, so its Never Flat polyurethane foam wheel supports loads that see frequent rolling moves. The air-free construction eliminates air pressure checks during daily operation, which benefits kitchens or production sets that reposition equipment repeatedly. The extra-cushion and support described for the Never Flat wheel help when rolling over joints or imperfect surfaces often found in service corridors and loading areas. A 10 inch wheel diameter provides height and leverage to navigate ramps or dock edges that smaller casters might handle less smoothly. The plate mounted caster design works naturally with welded or bolted frames common on carts and container bases in these environments, helping builders standardize on a known footprint. With a 350 lb capacity and swivel configuration, each caster can contribute to both support and maneuverability in multi-caster layouts.

Why These Caster Details Support Repeatable Results

The air-free Never Flat polyurethane foam wheel means the rolling profile and diameter stay consistent over time, so handling characteristics remain predictable from move to move. Extra-cushion and support in the wheel construction can soften impacts transmitted into the frame, which can help protect mounted equipment and welded joints during everyday rolling. The double-row ball bearing swivel raceway gives the swivel section defined support, so turning forces are carried by bearings rather than deforming the plate-to-frame connection. Zinc plating on the swivel raceway provides a protective layer against corrosion, supporting long-term rotation performance in typical indoor or sheltered settings. The 3-15/16 inch by 4-1/2 inch plate dimension lets fabricators repeat the same hole layout across multiple carts or containers, reducing layout time. A clearly stated 350 lb load capacity per caster allows planners to calculate support margins for multi-caster setups, supporting balanced loading and smoother rolling behavior.

Common Questions About This DH Casters Model

Selecting This Caster For Your Next Build

This DH Casters swivel caster with air-free Never Flat polyurethane foam wheel, 10 inch diameter, and 350 lb capacity ties directly into plate mounted casters work. The 3-15/16 inch by 4-1/2 inch plate mount and double-row ball bearing swivel raceway provide a defined, repeatable interface for welded or bolted frames. For food service equipment, film and movie equipment, or cargo containers that need steady maneuverability without flat-related stops, this C-NF10312RS caster offers a clearly specified wheel type, size, and capacity to design around. Apply the given load rating and plate dimensions to your layout and integrate this caster into your next cart or equipment build.