Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #8 x 3/4-inch truss head hinge and drawer slide installation screw is sized to seat hardware mounting plates cleanly against cabinet panels without overdriving into the substrate. The modified truss head, fine thread, and Type 17 Auger point work together to keep the joint tight and the hardware flush in production cabinet assembly.
Hinge mounting plates and drawer slide brackets come pre-drilled for a specific gauge and head geometry. The truss head on this screw spans the mounting hole without sinking through it, which keeps the hardware plate seated flat rather than tilting under the head. At 3/4 inch, the screw reaches through the mounting plate and gets enough thread engagement in a standard 3/4-inch cabinet side or face-frame member to hold the hardware firmly without punching through the back face. Cabinet shops running frameless boxes, face-frame builds, or a mix of both will find this length right for most hinge and slide mounting positions where the panel is a full 3/4 inch thick.
The nickel finish serves a practical purpose here: it keeps the screw head visually consistent with the silver-toned hardware it is securing. Exposed hinge plates and drawer slide mounting clips sit in sight lines inside the cabinet, and a screw head that contrasts sharply with the surrounding hardware draws attention. The fine thread is suited to hardwood and high-density engineered panels. In those materials, the closer thread spacing produces better holding power and resists loosening when the hardware sees repeated load cycles from door and drawer use.
This screw is built for cabinet manufacturers, professional installers, and finish carpenters who are running hinge and drawer slide installations at volume. The 8000-count box supports a full production run without mid-job restocking. A #2 Phillips bit is already in every shop bag and installation kit, so there is no tool change or bit hunt between tasks. Shops installing European cup hinges, undermount slides, or side-mount drawer hardware on 3/4-inch panels will find this screw covers most of their standard mounting positions in one SKU.
Fine threads have more threads per inch than coarse, which means more contact surface in the panel material. In hardwood or dense engineered panels, that translates to better pull-out resistance and less risk of the screw loosening as the hardware flexes under repeated door and drawer cycling.
The truss head has a wider, flatter bearing surface than a pan head and a lower profile than a standard round head. That wide bearing surface spans the pre-drilled hole in the mounting plate and holds the plate flat against the panel rather than sinking into or through the hole.
For mounting hinges or drawer slides onto a 3/4-inch panel, this length provides enough thread engagement to secure the hardware firmly while keeping the tip well back from the panel face. It is not the right choice if you are mounting into thinner stock or through a panel into a second member.
Yes. The screw is suited to either construction method as long as the mounting surface is a 3/4-inch hardwood or engineered-wood panel. The fine thread handles dense hardwood face-frame material and the standard engineered-wood panels common in frameless box construction.
The nickel finish provides standard indoor corrosion resistance and is appropriate for dry cabinet interiors. It is not rated for wet or exterior environments, so stick to interior cabinet applications with this screw.
When the job is hanging hinges and setting slides on 3/4-inch panels at production pace, this Würth screw keeps up: the right length, the right head, and enough screws in the box to finish the run without stopping.
Sold In: 8000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |