Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #8 x 3/4-inch truss head screw is designed for mounting European cup hinges, drawer slides, and similar cabinet hardware to panel stock. The 3/4-inch length suits the standard panel thickness used in frameless and face-frame cabinetry, seating hardware flush without over-penetrating the panel.
The 3/4-inch length is sized for mounting hardware to standard 3/4-inch cabinet panels. At that depth, the screw engages the full thickness of the panel without breaking through the back face, which matters on finished interiors and melamine-faced sides. It is the go-to length for European cup hinge plates, side-mount drawer slide clips, and similar hardware that attaches to the interior faces of cabinet boxes. When hardware mounting plates are pre-drilled to accept a #8 gauge screw, this size drops in without modification.
The truss head carries a wider-than-standard bearing diameter, which distributes clamping load across more of the mounting plate surface. This matters when hardware plates have oversized or elongated adjustment slots — the wide head spans the slot and holds the plate rather than pulling through the opening. The nickel finish holds up in cabinetry environments and visually blends with nickel-plated hinges, undermount slides, and other hardware rather than standing out as a mismatch against finished cabinet interiors.
Cabinet shops running production lines keep this size on hand because hinge and slide installation happens on nearly every cabinet box. The 1,000-piece box supports a full production run without constant restocking. Installers working on kitchen and bath projects also find the nickel finish useful when mounting hardware in high-visibility locations where screw heads remain exposed after installation. The #2 Phillips drive keeps this screw compatible with the bits already on most installation crews without requiring a dedicated square or star driver.
Hinge plates and drawer slide mounting brackets often have elongated slots to allow position adjustment. A truss head's wide bearing diameter spans those slots and holds the plate in place under load, where a smaller head could pull through or seat unevenly.
Yes. The coarse thread and Type 17 Auger point are suited to the engineered panel materials used in most cabinet boxes, including particleboard, MDF, and plywood.
It works for both. Most European hinge mounting plates and side-mount drawer slide clips attach to 3/4-inch panels, and this length is sized to engage the panel fully without penetrating the back face.
For dry interior applications like cabinet box assembly, nickel holds up well and coordinates with nickel-finished hardware rather than creating a visual contrast inside the cabinet.
A standard #2 Phillips bit works with this screw. For best results, use a properly sized bit in good condition to avoid cam-out during high-volume installation.
When hardware mounting needs to be fast, consistent, and finish-coordinated, this Würth 3/4-inch truss head screw keeps cabinet installation moving without surprises.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |