Solid Surface Seam Cartridge 9 oz starts with a two-part methacrylate, so you get a surfacing adhesive that cures with high strength, stiffness, and toughness, which matters when you are pulling tight, long seams on countertops or panels. The adhesive is ultra violet light stable and non-yellowing, so exposed seams in well-lit kitchens or commercial spaces stay closer to the original color match over time instead of shifting at the joint. It is designed for seamless bonding of solid surface materials, engineered stone, and natural stone products, so one product can be used across typical surfacing materials on the same job when the color match aligns. The formulation bonds very strongly to a wide variety of solid surface materials, so inside corners, miters, and build-ups stay solid under load and normal service conditions.
This methacrylate surfacing adhesive is formulated to bond acrylic solid surface, polyester solid surface, and alloy solid surface, so fabricators can run seams, edge builds, and drop fronts across mixed resin systems within the solid surface family. The ability to bond both filled and unfilled polyester solid surface means the adhesive supports typical sheet constructions used in many shop environments. Because the cured adhesive offers high bond strength to these materials, installers can profile, sand, and finish across the joint without the interface breaking down under tool pressure. The high solids formulation helps the bead stay where it is placed in the seam, which aids in achieving full contact across the joint line.
This Formica Adhesives seam adhesive is designed for seamless bonding of solid surface (acrylic and polyester and blends), engineered stone, and natural stone products, so it suits shop fabrication of countertops, splashes, and similar components in these categories. It provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and alloy solid surface, so runs that mix sheet types or brands within those resin families can rely on the same adhesive type where the color match is appropriate. Because the adhesive bonds very strongly to a wide variety of solid surface materials, it supports complex assemblies such as laminated edges, internal reinforcements, and multi-layer build-ups that will later be machined or routed.
The ultra violet light stable and non-yellowing characteristics are significant when working on installations with natural or strong artificial light, because the seam adhesive is formulated to maintain appearance closer to the original tone under light exposure. High strength, stiffness, and toughness in the adhesive mean that once fabrication is complete, the seams are built to handle typical service conditions, so field handling, transport, and normal installed loads keep the joint integrity consistent across the length of the seam.
The high solids content provides extended mileage from the 9 oz Solid Surface Seam Cartridge, which is useful on larger jobs where multiple seams and build-ups are required, helping maintain consistent material behavior from seam to seam. Because the adhesive is OTC compliant with no-urea formaldehyde added, it fits projects and regions that call for that type of formulation, aligning the adhesive choice with documented project requirements. The combination of high bond strength and toughness allows fabricators to sand, polish, and finish across the joint without the adhesive line undercutting prematurely, supporting a smooth transition across materials. The methacrylate chemistry is designed as a surfacing adhesive, so it is tailored for bonding the specified solid surface, engineered stone, and natural stone products in shop or field conditions where those substrates are used.
The seam adhesive is designed for solid surface, engineered stone, and natural stone products, so it can be used across these substrate types when forming seams and build-ups.
The ultra violet light stable, non-yellowing formulation helps the cured seam maintain a closer color match to surrounding surfaces under light exposure over time.
This product provides high strength bonds to acrylic solid surface, so it suits seams, build-ups, and edge work using acrylic sheets.
The adhesive provides high strength bonds to polyester solid surface, both filled and unfilled, supporting a wide range of sheet constructions.
High solids means extended mileage, so each 9 oz cartridge can cover more seam length, which supports efficient fabrication on larger projects.
The adhesive is formulated to be OTC compliant with no-urea formaldehyde added, aligning with regulations or specifications that call for those properties.
The Solid Surface Seam Cartridge 9 oz Tube Matching Formica 775 Luna Storm from Formica Adhesives offers a two-part methacrylate surfacing adhesive designed for seamless bonding of solid surface, engineered stone, and natural stone products. Its high strength, stiffness, and toughness support demanding seam locations, while ultra violet light stable, non-yellowing performance helps maintain seam appearance in bright environments. Using a high solids, OTC compliant, no-urea formaldehyde added formulation, it suits projects that value both strong joints and documented adhesive properties. Apply this cartridge where solid surface, engineered stone, or natural stone seams require structural bonding and a coordinated color match to Formica 775 Luna Storm.
Sold In: 1 Each