Amerock 3/8 inset face mount hinge describes a semi-concealed hinge designed for face-frame cabinets with a 3/8 inch inset, so the door edge sits partially over the frame while still stepping back into the opening. This hinge uses a face mount layout, so it attaches directly to the cabinet frame, supporting straightforward hinge positioning on standard face-frame construction. The hinge is free swinging, meaning it does not self close, which suits projects where a separate catch or soft-close device controls the door movement. A screw-on mounting style is specified, so the hinge fastens to the cabinet and door with standard screw attachment rather than press-in fittings, supporting a familiar workflow for installers used to screw-fixed hinges. The golden champagne finish identifies the visual appearance of the hinge, allowing it to coordinate with other golden champagne hardware on the job.
This Amerock Corporation hinge is described as a face mount hinge, so the cabinet-side leaf fastens directly onto the front of the face frame instead of an interior panel, which simplifies layout on conventional framed cabinetry. The screw-on description means the hinge relies on screw fasteners through its mounting holes, which supports step-by-step installation using familiar tools on wood cabinet doors and frames. Because the hinge is semi-concealed, only the knuckle and defined parts of the leaves remain visible, so installers can set the hinge while still seeing enough of the hardware body to confirm alignment relative to door gaps and reveals. The 3/8 inch inset configuration guides where the door edge lands against the frame, so consistent use of this hinge style across a run of doors supports uniform reveals along the face of the cabinet.
This hinge is identified as a semi-concealed face mount hinge, so it suits cabinet doors where part of the hinge should remain visible on the frame, such as many traditional or utility face-frame installations. The 3/8 inch inset specification pairs with doors designed to step back into the opening while still covering part of the frame face, supporting projects built around that specific inset geometry. Because the hinge is non self close and free swinging, it works well in layouts where door movement is controlled by separate catches or latches, allowing flexibility in how the door is held shut. The golden champagne finish allows the visible hinge areas to coordinate with golden champagne decorative hardware in the same space, so the hinge appearance can match other Amerock hardware selections on the job.
The face mount configuration places the hinge mounting pattern directly on the face frame, which can streamline jig-based drilling or marking because the reference surface is the front of the cabinet rather than the interior. The screw-on mounting style supports repeatable installation, since installers can use consistent screw locations to maintain alignment across multiple doors using this same hinge. By selecting a hinge clearly marked as 3/8 inch inset, installers can align door edges and reveals to the intended inset relationship, which helps reduce rework when hanging several doors in a run. The semi-concealed design leaves enough of the hinge visible to observe the knuckle position relative to the door and frame, aiding fine-tuning of gaps using the screw locations allowed by the hinge pattern. Testing to exceed KCMA certification requirements indicates the hinge series has been evaluated under cabinet-industry durability conditions for cycle life, which matters when doors are opened and closed repeatedly in everyday use.
The Amerock BPR3417BBZ hinge is specified as 3/8 inch inset, so it suits doors designed to sit partly over the face frame and partly inside the opening, common in traditional face-frame cabinet layouts.
The Amerock BPR3417BBZ hinge is non self close and free swinging, so door closing force comes from the user or from separate catches or latching hardware used with the cabinet.
The hinge is described as a face mount hinge, so it fastens to the front of the face frame, helping installers reference layout from the cabinet front instead of relying on interior panels.
The Amerock hinge is a semi-concealed hinge, so some parts remain visible while other parts are hidden, which supports access for installation while keeping a portion of the hardware out of sight.
The hinge has a golden champagne finish, so its visible areas present a warm metallic tone that can visually align with golden champagne knobs, pulls, and other decorative hardware.
Every Amerock functional hardware series item is tested for durability in conditions exceeding KCMA certification requirements and BHMS standards, supporting cabinet projects needing proven cycle life and finish performance.
This Amerock Corporation semi-concealed face mount hinge combines a 3/8 inch inset layout, free swinging non self close function, and a golden champagne finish, aligning with traditional face-frame cabinet designs that use separate catches or latches. The screw-on mounting style suits installers accustomed to fastening hinges directly to wood doors and frames, while the semi-concealed format supports a cleaner look with enough hardware still visible for practical alignment. For cabinet projects that call for a 3/8 inch inset relationship and a golden champagne hardware family, this Amerock BPR3417BBZ hinge offers a tested functional hardware option for your next run of doors.