Amerock free swinging 3/8 inset face mount hinge BPR3417FB is a semi-concealed hinge that mounts on a face frame and 3/8 inch inset door, so it lets the door overlay the frame edge while staying partially hidden. This hinge is non self-close, so the door movement is free swinging, which matters when a project needs doors that move without spring resistance or automatic pull-in. The screw-on design uses a straightforward mechanical attachment, so installers can position and secure the hinge precisely on the frame and door. The flat black finish gives the hinge a dark, uniform appearance, which matters when matching modern black hardware or creating visual contrast against lighter cabinet finishes. As part of an Amerock Corporation functional hardware series, this hinge is tested for durability in conditions exceeding KCMA certification requirements and BHMS standards for cycle life, strength and finish quality, so it supports long-term cabinet use under demanding opening and closing cycles.
This Amerock semi-concealed face mount hinge is designed for face-frame cabinets with 3/8 inch inset doors, so it defines how the door sits relative to the frame during installation. The screw-on attachment style connects directly to the cabinet and door, so it lets installers position the hinge to achieve consistent gaps and alignment across multiple openings. Because the hinge is free swinging and non self-close, there is no internal closing mechanism affecting alignment, so door positioning depends on the physical mounting locations chosen during installation. The flat black finish on the hinge remains visible where the semi-concealed portions show, so hinge placement also contributes to the finished look of the cabinet front. The Amerock functional hardware series testing beyond KCMA and BHMS standards supports confidence that once mounted, the hinge performance remains stable through repeated daily use.
This hinge is identified as a 3/8 inch inset face mount hinge for face-frame cabinets, so it works where the door edge sits partially over and partially within the frame. The semi-concealed design keeps only part of the hinge visible on the cabinet front, which supports projects that need a traditional hinge look without fully exposed straps. Because the hinge is free swinging and non self-close, it suits cabinets where users prefer manual control of door opening and resting position, such as work areas that require doors to remain open during tasks. The flat black finish lets the visible portions tie into other black Amerock hardware, which helps maintain a consistent appearance across doors, drawers, and other components using the same finish family.
The screw-on mounting of this Amerock BPR3417FB hinge lets installers place and secure the hinge exactly where it delivers the best reveal between door and frame, which is important for achieving uniform gaps in long cabinet runs. Since the hinge is non self-close, there is no spring tension altering how the door seats, so the alignment achieved at installation remains governed by the mounted positions and hinge geometry. The Amerock functional hardware series testing in conditions exceeding KCMA certification requirements means the hinge has been evaluated for strength and finish quality beyond common residential cabinet demands, which supports consistent door swing after many open-and-close cycles. Testing that also exceeds BHMS standards for cycle life confirms that the hinge mechanism and finish are validated under rigorous operation, which matters for installations expecting heavy daily use, such as busy kitchens, shop cabinets, or frequently accessed storage areas.
The Amerock BPR3417FB hinge is a semi-concealed face mount hinge for 3/8 inch inset face-frame doors, so it suits layouts using partial inset doors on framed cabinets.
The 3/8 inch inset design sets the door partially within the face frame, creating a specific overlay and reveal, which helps maintain consistent spacing between adjacent cabinet doors.
The non self-close free swinging operation means the hinge does not pull the door shut, so the door moves and rests based on how it is positioned by the user.
Amerock functional hardware testing beyond KCMA and BHMS standards validates cycle life, strength, and finish quality, which supports dependable hinge performance under repeated cabinet use.
The flat black finish gives the hinge a dark, uniform look, so visible portions align with black pulls and knobs, supporting a coordinated cabinet hardware design.
The face mount design attaches the hinge to the cabinet face frame, so it sets door swing directly from the frame, helping maintain stable, predictable door movement.
The Amerock free swinging 3/8 inset face mount hinge BPR3417FB combines a semi-concealed layout, non self-close movement, and a flat black finish, so it supports projects needing partial inset doors with controlled swing and coordinated black hardware. Its role as a face mount hinge on framed cabinets simplifies how door position relates to the frame edge, which helps during layout across multiple openings. With Amerock functional hardware series testing exceeding KCMA certification requirements and BHMS standards for cycle life, strength, and finish quality, this hinge offers a verified option when selecting hardware for frequently used 3/8 inch inset cabinet doors.