Amerock self-close 1/2 inch overlay hinge describes a single demountable, semi-concealed hinge designed for 1/2 inch overlay cabinet doors, which lets you specify it confidently for face-frame cabinetry needing this overlay. The hinge uses a self-close function, so the mechanism pulls the door shut at the end of travel, which helps cabinets sit closed without constant adjustment. This hinge is identified as a single demountable hinge, meaning it is designed so the door side can be detached from the frame side, which supports door removal and refitting in shop workflows and on installed runs. It is classified as a semi-concealed face-frame hinge, so part of the hardware remains visible while key workings stay out of sight, giving a functional but cleaner look on the job. The product is an Amerock Corporation BPR871914 hinge, so you can match specs by exact manufacturer part number across layouts and reorders.
The hinge is identified as a 1/2 inch (13mm) overlay hinge, so the door overlays the face frame by that amount, which sets where you size doors relative to openings and frame widths. Because it is a single demountable pattern, the design allows the door to disengage from the frame-mounted side, which can speed up hinge-side sanding, finishing, and hinge-side repairs. Being a semi-concealed face-frame hinge, it positions part of the mechanism inside the cabinet line while leaving a controlled portion visible, which keeps hinge articulation workable while reducing visual clutter on the stile. The product is described as screw-on, so the mounting method relies on screw fastening, giving a familiar installation process for cabinet shops and field installers.
This Amerock semi-concealed hinge is categorized under semi-concealed face-frame demountable hinges, so it is aimed at cabinets using a face-frame construction rather than frameless boxes, aligning it with many traditional and built-in projects. The 1/2 inch overlay specification defines its role on doors that partially cover the frame, which is a common overlay choice in kitchens, baths, and utility cabinets. Because the hinge is described as a single demountable hinge, it is suited to situations where doors may need to be removed for finishing or service and later hung back on the same frame leaves. The nickel finish provides a cool, smooth, silver-toned surface, so exposed portions coordinate with nickel pulls and knobs in the same space.
The self-close function of this Amerock hinge means the hinge mechanism draws the door closed near the end of travel, which helps doors sit against the face frame without relying solely on user placement every time. Testing for durability in conditions exceeding KCMRA certification requirements and BHMS standards for cycle life, strength, and finish quality indicates the hinge has been evaluated for repeated opening and closing under demanding conditions, which is useful in higher-traffic rooms. Heavy-duty steel construction supports this performance by providing a strong hinge body that resists deformation under repeated loads in normal cabinet service. As a screw-on design, the hinge is fastened using screws into the cabinet and door materials, allowing installers to use common tools and methods while setting reveals based on the specified 1/2 inch overlay.
The Amerock BPR871914 is a semi-concealed face-frame hinge with a 1/2 inch overlay, fitting cabinet layouts where doors partially cover a face frame by that overlay dimension.
The 1/2 inch overlay hinge specification means each door edge extends 1/2 inch over the face frame, guiding how wide you build doors relative to framed openings.
The single demountable hinge design allows the door side to detach from the frame-mounted side, helping with finishing, transport, and later removal for adjustments or access.
The nickel finish on this hinge provides a cool, smooth silver-toned appearance, supporting visual coordination with other nickel cabinet hardware throughout a project.
The self-close function on this Amerock hinge pulls the door closed at the end of travel, helping doors rest against the frame for a consistent closed position.
This hinge series is tested in conditions exceeding KCMRA certification requirements and BHMS standards for cycle life, strength, and finish quality, supporting use in frequent-opening applications.
The BPR871914 Amerock self-close 1/2 inch overlay hinge combines a single demountable layout, semi-concealed face-frame geometry, and a nickel finish, giving a clear specification when planning new cabinets or refitting existing doors. Its heavy-duty steel construction and testing beyond KCMRA and BHMS requirements supply performance detail for projects expecting repeated daily use. With a defined 1/2 inch overlay and screw-on installation style, this hinge offers predictable door positioning using familiar tools. For work calling for an Amerock Corporation semi-concealed demountable hinge in nickel, this model aligns cabinet overlay, appearance, and use-focused function in one part number.
Sold In: 1 Pair