Amerock Self-Close 1/2" Overlay Single Demountable Hinge, Screw-on Satin Nickel - BPR8719G10

Amerock Self-Close 1/2 Overlay Hinge For Cabinets

Amerock self-close 1/2 overlay hinge defines this semi-concealed face-frame hinge as a practical choice for cabinet doors that overlay the frame by 1/2 inch, giving a consistent reveal that matches standard 1/2 inch overlay layouts. The single demountable hinge design supports doors that need to be removed from the cabinet side without disturbing the frame mounting, which helps during finishing work or later adjustments. Its self-close function draws the door shut at the end of travel, reducing door bounce and helping doors sit in the same position each time. Made from steel, the hinge provides a solid metal body for typical cabinet environments where a dependable hinge is needed. The satin nickel finish brings a muted metallic look that coordinates with satin nickel pulls and knobs, which keeps hardware visually consistent across the project.

Key Amerock Demountable Hinge Details

• The 1/2 inch overlay rating sets the door edge 1/2 inch past the face frame, which aligns well with layouts planned around standard 1/2 inch overlay doors on kitchens or built-ins.
• The semi-concealed design leaves only a small portion of the hinge visible, so cabinets retain a cleaner front appearance while still showing a traditional hinge line at the edge.
• The self-close feature pulls the door shut near the closing point, helping doors reach the closed position even when users do not push them fully, which supports consistent alignment.
• The steel construction gives the hinge a metal body suited to everyday cabinet door cycling, which matters on frequently used installations like kitchens and workrooms.
• The satin nickel finish coordinates with other satin nickel hardware, keeping the visible part of the hinge in harmony with handles, pulls, and surrounding metal details.
• The 2-1/4 inch hinge length and 1-1/2 inch width define the hinge footprint on the door and frame, which helps plan clearances where hinges sit close to edges or adjacent cabinets.

Face-Frame Hinge Fit, Overlay, And Projection

This semi-concealed hinge is part of Amerock Corporation's demountable hinge line, placing it in a category tailored for face-frame cabinet construction. With a listed projection of 11/16 inch, the hinge positions the door off the face frame by that distance, which affects how knobs line up relative to counters or adjacent doors. The 1/2 inch overlay specification tells you the door will overlap the frame opening by that amount, supporting layouts where repeated 1/2 inch overlays must match across a run of doors. The steel material works with the self-close feature to manage the motion of typical cabinet door sizes in indoor woodworking projects. The satin nickel finish on the visible portion of this semi-concealed hinge provides a consistent tone where hinges are seen at the edge of the door.

Using This Amerock Demountable Hinge In Work

Where This Semi-Concealed Hinge Is Applied

This hinge sits in the Semi-Concealed Hinges and Demountable Hinges categories, tying it directly to face-frame cabinet construction where part of the hinge shows and part is hidden behind the door. The 1/2 inch overlay configuration suits cabinets built so the door covers the frame front by that amount, which is common on many residential and shop-built cabinets. As a single demountable hinge, it is used where the door side can be detached from the cabinet without removing the portion secured to the face frame, which helps during refinishing, hinge replacement, or door adjustment work. The 2-1/4 inch length and 1-1/2 inch width dimensions define the general size of door edge and frame exposure, so this hinge works well in layouts that match those proportions across multiple doors.

Details That Support Consistent Door Results

The self-close function on this Amerock self-close 1/2 overlay hinge helps doors settle into the same resting position each time, supporting clean alignment when several doors share a common reveal line. The 11/16 inch projection value keeps the door standoff consistent from the face frame, which matters where doors swing past face frames, counters, or adjacent cabinets. Steel construction provides a stable base for the self-closing action and the repeated motion of cabinet doors in woodworking environments. The satin nickel finish ties the visible hinge portions to other satin nickel hardware, simplifying visual coordination on full room projects. As a semi-concealed hinge, it balances a traditional exposed-hinge look with reduced visual clutter, which can satisfy design goals that call for some metal detail without a fully exposed strap hinge.

Common Questions About The Amerock 1/2 Overlay Hinge

Selecting This Hinge For Your Next Cabinet Run

The Amerock self-close 1/2 overlay hinge combines semi-concealed face-frame mounting, single demountable function, and self-closing action in a steel body with satin nickel finish, aligning well with cabinet projects built around 1/2 inch overlay doors. With defined dimensions of 2-1/4 inch length, 1-1/2 inch width, and 11/16 inch projection, it offers predictable door positioning across a run of face-frame cabinets. For woodworking jobs where coordinated satin nickel hardware and repeatable 1/2 inch overlays matter, this Amerock Corporation hinge provides a clearly specified option ready to integrate into your layout.