Amerock self-close 1/4 inch overlay hinge describes a semi-concealed hinge designed for cabinet doors with a 1/4 inch overlay on a face-frame, so it supports common framed cabinet layouts found in many shops and installs. As a single demountable hinge, it is built to let the door be removed from the frame side without taking the hinge leaf off the cabinet, which speeds door removal and re-hanging during adjustments or finishing. The self-close function is designed so the hinge pulls the door shut at the end of travel, helping doors return consistently to the closed position in everyday cabinet use. This hinge is part of Amerock functional hardware, so it belongs to a line developed specifically for working cabinet applications rather than decorative use only. As a semi-concealed hinge in a demountable style, it leaves a visible portion while keeping most of the working parts out of sight, giving a functional yet clean cabinet appearance.
This Amerock single demountable hinge is built for face-frame cabinets, so its geometry is oriented to mount on a framed cabinet style rather than a frameless construction. The demountable design separates the frame-mounted element from the door-mounted portion, which streamlines taking doors off during shop work or on-site service. The 1/4 inch overlay specification defines how far the door overlaps the frame, guiding layout when positioning doors during install or replacement. As a semi-concealed hinge, it is intended to sit mostly out of sight behind the door and frame, which influences how the cup and leaf portions align during fitting. The self-close function is integrated into the hinge action, so installers get closing assistance without adding separate closing devices.
This Amerock self-close 1/4 inch overlay single demountable hinge is oriented to face-frame cabinet construction, so it serves in projects where a framed cabinet front is standard. The 1/4 inch overlay specification means it suits doors that are designed to overlap the frame edge by that amount, which is common in many production and custom cabinet runs. Because the hinge is classified as semi-concealed, it is used where the working hardware should sit largely behind the door and frame while a controlled visible segment remains on the face-frame. As a demountable hinge, it is applied in situations where repeated door removal is likely during finishing, adjustments, or later modifications, supporting that workflow through its separable design. The satin nickel finish gives the hinge a specific appearance that coordinates well where other satin nickel hardware elements are part of the cabinet layout.
The self-close feature on this Amerock hinge provides active pull-in at the end of travel, which helps cabinet doors settle into the same closed position after each use and supports consistent reveals along the frame. The single demountable construction allows the door side to disconnect from the frame-mounted portion, which reduces labor when doors must be taken down for spraying, touch-up, or hardware changes. Its 1/4 inch overlay geometry defines the relationship between door edge and frame, which assists in maintaining uniform overlays across a run of cabinets during layout and installation. Being part of Amerock functional hardware, tested beyond KCMA certification demands and BHMS standards for cycle life, strength, and finish quality, this hinge is engineered to handle the repeated opening and closing cycles found in everyday cabinet environments. The semi-concealed classification and satin nickel finish work together to keep the hinge mechanics out of primary view while presenting a nickel-tone face that visually matches satin nickel pulls and knobs, supporting a coordinated cabinet appearance.
This Amerock self-close 1/4 inch overlay single demountable hinge is designed for face-frame cabinets, so it aligns with framed construction rather than frameless layouts.
The 1/4 inch overlay rating means the cabinet door overlaps the face-frame by 1/4 inch, guiding door sizing and placement when planning or replacing doors on framed cabinets.
The single demountable design lets the door portion separate from the frame-mounted part, so doors can be removed and re-hung more quickly during finishing or adjustment work.
The self-close function in this hinge pulls the door into the closed position near the end of travel, which helps doors return fully closed and keeps reveals more consistent.
The satin nickel G10 finish gives the hinge a nickel-tone appearance, so it visually coordinates with other satin nickel self-close cabinet hinge components and trim hardware.
This Amerock functional hardware hinge is tested for durability in conditions exceeding KCMA certification requirements and BHMS standards for cycle life, strength, and finish quality.
The Amerock self-close 1/4 inch overlay single demountable hinge in satin nickel is built as semi-concealed functional hardware for face-frame cabinets, with a defined 1/4 inch overlay relationship and self-close action that supports consistent day-to-day use. Its demountable configuration is oriented to repeated door removal and re-hanging, which suits workflows that involve staged finishing or later adjustments in the field. Tested beyond KCMA certification standards and BHMS requirements for cycle life, strength, and finish quality, this Amerock hinge is positioned for cabinet projects that demand proven functional performance. For face-frame layouts using a 1/4 inch overlay and satin nickel hardware, this hinge offers a matching mechanical and visual solution.