Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 1/4 overlay hinge describes a semi-concealed hinge designed to provide a 1/4 inch overlay on a face-frame cabinet door, giving a consistent reveal that matters when matching existing lines across a run of doors. As a self-close hinge, it pulls the door shut at the end of travel, which helps doors sit closed without manual nudging and reduces door bounce in everyday use. This hinge is part of Amerock Corporation functional hardware, so it follows a familiar layout and operation for installers who regularly work with the brand. The hinge is described as single demountable, meaning it is built so the door can be removed from the frame side without dismantling the entire hinge, which helps during finishing, adjustments, or later service. The semi-concealed design keeps most of the hinge out of sight while still giving a traditional face-frame appearance at the stile edge.
This Amerock demountable hinge is specified as a self-close 1/4 inch overlay design, so the layout centers on achieving that quarter-inch overlap of the door over the frame, which drives drilling and positioning decisions on face-frame cabinets. Being a semi-concealed hinge, part of the hardware sits on the interior side of the frame while a shaped portion remains visible at the door edge, so mounting must respect both door swing and visible alignment. The single demountable style means the installer can separate the door component from the frame component, which can simplify hanging multiple doors in a row by allowing doors to be set aside during frame work and then reattached. As an Amerock Corporation hinge, it aligns with the companys established functional hardware patterns, which is helpful when following existing cabinet layouts using other Amerock pieces.
This hinge is categorized under semi-concealed face-frame hinges and demountable hinges, so it is intended for cabinets that use a face frame rather than frameless construction, guiding where it fits into shop projects. The 1/4 inch overlay specification defines the door relationship to the frame, making it suited to cabinets laid out around that specific overlay dimension rather than full-overlay or inset designs. Because the hinge is single demountable, the cabinet door can be taken off the frame side at the hinge connection, which suits situations where doors are periodically removed for refinishing, alterations, or hardware checks during a build sequence. As part of Amerock functional hardware, this hinge belongs with other Amerock cabinet components, allowing consistent operation and appearance across doors built around the same 1/4 inch overlay concept.
Amerock Corporation states that every Amerock functional hardware series item is tested for durability in conditions exceeding all KCMA certification requirements, which means this hinge is proven under cabinet-industry test loads that surpass those benchmarks and supports long-term performance in typical cabinet environments. The same description notes testing beyond BHMS standards for cycle life, strength, and finish quality, so this hinge is evaluated for repeated opening and closing, structural loading, and surface performance beyond those standard levels, helping it hold up under frequent door use. The finish is identified as champagne bronze, and that specific finish tone affects how the visible semi-concealed portion coordinates with pulls, knobs, and other champagne bronze elements on the project. The manufacturer part number BPR8715CZ uniquely identifies this hinge in Amerocks catalog, which is valuable when matching existing hardware or reordering the same 1/4 inch overlay configuration for expansions or repairs.
The Amerock self-close 1/4 overlay hinge is specified for 1/4 inch overlay on face-frame cabinets, so it fits projects laid out around that overlay dimension.
The Amerock self-close function pulls the door into the closed position at the end of travel, keeping doors seated and helping maintain consistent reveals when doors are at rest.
The Amerock single demountable hinge design lets the door side disconnect from the frame side, allowing easier door removal for finishing or later adjustments.
This Amerock semi-concealed hinge keeps most of the hardware inside the cabinet while leaving a shaped portion visible on the face frame, balancing access with a traditional look.
The Amerock champagne bronze finish sets the visible portion of the hinge in a warm metallic tone, helping it coordinate with matching champagne bronze knobs and pulls.
The Amerock BPR8715CZ designation uniquely identifies this self-close 1/4 inch overlay demountable hinge, which simplifies matching existing installations or reordering for additional cabinets.
The Amerock self-close 1/4 overlay hinge in champagne bronze brings a semi-concealed, single demountable design that supports face-frame cabinet work built around a quarter-inch overlay. Amerock durability testing beyond KCMA and BHMS standards means this hinge is proven for strength, cycle life, and finish quality before it ever reaches the jobsite. With the BPR8715CZ part number tying it directly to Amerock functional hardware, it fits projects that require consistent operation and appearance across multiple doors. For cabinet runs planned around 1/4 inch overlay using Amerock hinges, this self-close demountable hinge provides a defined layout and repeatable performance.