Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 1/4 overlay hinge is a single demountable, semi-concealed face-frame hinge that controls cabinet door swing and closing, which helps installers deliver predictable door alignment on face-frame cabinets. The hinge is built from steel, so the body provides a solid bearing surface at the frame, which matters for long-term door support. Its self-close function pulls the door shut at the end of travel, which helps doors sit against the frame without extra adjustment. The 1/4 inch overlay rating defines how far the door overlaps the face frame, which is critical when laying out reveals and matching existing doors. The oil rubbed bronze finish colors the visible hinge areas, so the hardware can visually coordinate with oil rubbed bronze cabinet components. The hinge is identified as Amerock Corporation part BPR8715ORB, which ties directly to the manufacturer specification for repeat ordering on multi-opening jobs.
This Amerock demountable cabinet hinge is listed in the semi-concealed face-frame hinge category, so it is intended to mount on cabinet face frames where only part of the hinge shows. The 1/4 inch overlay specification defines the relationship between the door edge and the face frame edge, which matters when aligning multiple doors on a shared frame. The stated hinge width of 1-1/2 inches and length of 2-1/4 inches describe the hinge plate footprint, which helps installers visualize door edge coverage on the frame. The 5/8 inch projection value reflects how far the hinge projects from its mounting surface, which affects door position relative to the cabinet front. The screw-on description indicates the hinge mounts using screws through its plate, which provides a mechanical connection at the cabinet and door.
This single demountable hinge sits in the Amerock semi-concealed face-frame hinge class, so it is suited to cabinet projects built with face frames rather than frameless boxes. The 1/4 inch overlay is a defined value, so it matches cabinet layouts that are designed around a quarter-inch overlap of the door over the frame stile. When a run of cabinets shares the same overlay value, using this 1/4 inch overlay demountable hinge supports consistent reveals across doors. The hinge length of 2-1/4 inches and width of 1-1/2 inches describe the metal body that seats on the cabinet and door, which gives installers a sense of how much surface the hinge covers during layout. The 5/8 inch projection dimension describes how far the hinge stands out, which ties into the door's resting position in front of the face frame. The oil rubbed bronze finish places this hinge visually in projects where darker, bronze-toned hardware is selected, which is common in many traditional or rustic cabinet designs.
The BPR8715ORB designation links this Amerock oil rubbed bronze hinge to a repeatable specification, so once a shop has tuned a door program around this hinge, the part number keeps that setup consistent across future orders. The self-close feature is built into the hinge design, so the closing assistance is part of each mounted hinge, which helps multiple doors on a bank behave similarly when pushed toward the frame. The steel construction provides a uniform material for all hinge leaves, which supports consistent drilling and driving feel during installation. The demountable style allows the door side to disengage from the frame-side setup, which is useful when doors must be removed for finishing or jobsite access and then placed back to the same hardware layout. The 1/4 inch overlay rating ties directly to common cabinet design standards, so design software or shop drawings based on a quarter-inch overlay can align with this hinge model. The oil rubbed bronze finish on the exposed areas lets installers match this hinge to other Amerock oil rubbed bronze pieces specified on the project, which simplifies hardware coordination across a full room of cabinets.
The Amerock self-close 1/4 overlay hinge is specified for 1/4 inch overlay on face-frame cabinets, which suits doors designed to overlap the frame by a quarter inch.
The hinge self-close function assists the door in pulling shut near the end of travel, which helps doors settle against the face frame after normal opening and closing.
The single demountable design lets the hinge interface support removing and reinstalling the door side from the mounted frame-side hardware, which is useful during finishing or service.
The hinge length and width describe the steel body size on door and frame, which helps plan hinge spacing and understand surface coverage during layout.
The oil rubbed bronze finish colors the exposed steel surfaces a dark bronze tone, which coordinates with oil rubbed bronze cabinet pulls and other matching hardware.
The 5/8 inch projection describes how far the hinge extends from its mounting points, which influences the resting position of the cabinet door relative to the face frame front.
The Amerock self-close 1/4 overlay hinge, BPR8715ORB, combines a steel body, semi-concealed face-frame layout, and single demountable construction, so it fits cabinet runs built around 1/4 inch overlay doors. Its 2-1/4 inch length, 1-1/2 inch width, and 5/8 inch projection define how it seats on the frame and door, which supports planning consistent hinge placement. The oil rubbed bronze finish aligns this hinge with darker cabinet hardware selections, which helps maintain a unified appearance across doors. For cabinet work calling for 1/4 inch overlay, self-close action, and oil rubbed bronze hardware, this Amerock hinge provides a matched set of dimensions and finish to base the job around.
Sold In: 1 Pair