Amerock self close 1/4 overlay hinge defines this single demountable, semi-concealed hinge designed for face-frame cabinet construction. The 1/4 inch overlay configuration sets the door position on the frame, which guides clearances and layout during cabinet building or retrofit work. Its self-close function pulls the door shut at the end of travel, which helps doors sit consistently against the frame over repeated use. As a semi-concealed hinge, part of the hardware remains visible, which influences both the look of the installation and how the hinge is positioned on the door and frame. This hinge belongs to Amerock Corporation functional hardware series, aligning it with their tested cabinet hardware lines.
The 1/4 inch overlay configuration defines how the door covers the face frame, which directly influences hinge layout measurements on both components. As a semi-concealed hinge, its visible portions on the frame guide where installers scribe, drill, and mount during cabinet construction or replacement work. The single demountable format separates the hinge from the frame-mounted portion, which simplifies door handling during finishing or on-site fitting because the frame reference points stay fixed. The self-close action engages at the end of swing, which affects how firmly the door seats and how much force is felt as the door closes.
This Amerock Corporation single demountable hinge is part of the semi-concealed face-frame hinges category, placing it in typical cabinet work where a face frame defines the opening. The 1/4 inch overlay designation means the door edge overlaps the frame by that amount, which is often used when planning moderate reveals between adjacent doors. As a demountable hinge, the door-side connection can be separated from the frame-side component, which supports workflows where doors move between the bench and the cabinet during finishing or hardware fitting. Its flat black finish color influences how the visible hinge portions coordinate with dark cabinet finishes or design choices centered around black hardware.
The Amerock self close 1/4 overlay hinge part number BPR8715FB identifies a specific configuration, which helps maintain consistency across cabinets when the same hinge is used throughout a project. Belonging to Amerock functional hardware series means this hinge is tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength, and finish quality, which supports long-term performance expectations in typical cabinet environments. The self-close function reduces variation in how doors rest against the frame, which improves alignment from door to door when layout has been done accurately. Testing for finish quality means the flat black surface is evaluated for appearance retention, which matters when the visible portion of this semi-concealed hinge contributes directly to the finished look.
The Amerock BPR8715FB is a single demountable, semi-concealed hinge for face-frame cabinets, which positions the door with a 1/4 inch overlay on the frame.
The 1/4 inch overlay sets how far the door overlaps the face frame, which defines door spacing, reveals, and hinge mounting positions during cabinet construction or retrofit work.
The Amerock self close 1/4 overlay hinge pulls the door closed near the end of swing, which helps doors seat firmly against the frame for a consistent closed appearance.
This hinge belongs to semi-concealed face-frame hinges, so it is used on cabinets built with a face frame where part of the hinge remains visible on the frame.
The Amerock functional hardware series hinge is tested for durability in conditions exceeding KCMA certification requirements and BHMS standards for cycle life, strength, and finish quality.
The Amerock BPR8715FB hinge is screw-on flat black, which sets the visible color of the semi-concealed portions and coordinates with dark or black cabinet hardware schemes.
The Amerock self close 1/4 overlay hinge, part number BPR8715FB, gives a defined 1/4 inch overlay for face-frame cabinets, which supports consistent door reveals. Its single demountable, semi-concealed design fits workflows where doors move between bench and cabinet. Tested Amerock functional hardware series performance for cycle life, strength, and finish quality aligns this hinge with demanding cabinet use. For projects calling for flat black hardware and 1/4 inch overlay on face frames, this hinge offers a clearly identified, repeatable setup.