
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Perrine Counter Mounted bar support by Federal Brace is a heavy duty workstation and countertop bracket designed to mount directly on top of a sub-counter or surface, so you can create a clean elevated serving or reception bar. A teardrop foot plate that bolts to the counter provides a stable base, which helps transfer the load safely into the substrate when supporting heavy stone or glass counters. A stylish gusset extends from the foot plate to the top plate, adding strength at the critical angle and helping reduce flex under load during everyday use. The 6 inch elevated bar height supported by this bracket allows designers to build a comfortable bar level above the main counter. In a black finish, the support visually recedes under dark tops and coordinates with other dark fixtures in the workspace.
The installation of Perrine Countertop Mounted Brackets is described as a special install, meaning the workflow relies on coordination with the countertop fabricator to create the bolt interface. Holes need to be prefabricated into granite or other stone materials, or predrilled into wood counters, to accept a 1/4 inch diameter flat head bolt, which allows the teardrop foot plate to bolt directly to the surface for a flush, secure connection. A single 0.5 inch countersunk hole in the bracket plate is designed to accept this bolt head, helping keep hardware below the top plane. Fasteners are stated as not included, so bolt selection can be matched to the specific counter material and structural requirements on the project.
The Perrine bar support 10x2x6 black configuration is suited to applications where a 6 inch elevated bar is needed above a primary counter, such as reception desks or serving counters that transition from a work surface to a guest-facing ledge. Because the teardrop foot plate bolts directly to the sub-counter or finished surface, it works well on solid substrates where a through-bolt connection can be engineered into the build. In projects with heavy stone or glass counters, the 500 pound carry capacity supports the elevated bar portion so it can handle the combined weight of the top and everyday use loads. The 10 inch upper plate length enables an elevated counter depth up to 18 inches, which covers many common bar overhang dimensions and gives flexibility in layout without changing bracket style.
The 0.25 inch material thickness used in this workstation and countertop bracket helps installers achieve consistent alignment because the bracket resists twisting as bolts are tightened into the counter, supporting a straight run of supports under the elevated top. The gusset that extends from the teardrop foot plate to the upper plate adds rigidity at the connection point, which reduces deflection when the bar is loaded and helps maintain a level surface across multiple brackets. With one 0.5 inch countersunk hole sized for a 1/4 inch diameter flat head bolt, the fastening pattern is straightforward, which simplifies layout and drilling steps for fabricators preparing stone or wood tops. Since the Perrine Support is offered in both brushed stainless steel and black finishes, designers can repeat the same structural geometry in different areas of a project while matching visible hardware to each room's finish scheme. The defined elevated bar height of 6 inches provides a consistent vertical offset from the main counter, which simplifies coordination with adjacent millwork and fixtures along a continuous run.
The Perrine countertop mounted bracket uses a special install where the teardrop foot plate bolts directly to the counter through prefabricated or predrilled holes, creating a solid mechanical connection.
The Perrine Counter Mounted bar support uses its 10 inch upper plate to support an elevated counter up to 18 inches deep, allowing generous bar overhangs from a single bracket position.
The Federal Brace Perrine bar support is designed for a 6 inch elevated bar, providing a fixed offset above the primary counter for reception or serving applications.
The Perrine Counter Mounted bar support has a stated carry capacity of 500 pounds, allowing it to handle heavy stone or glass tops and typical use loads when spaced appropriately.
The Perrine bar support uses one 0.5 inch countersunk hole sized for a 1/4 inch diameter flat head bolt, creating a flush fastening point into the counter substrate.
The Perrine Counter Mounted bar support is available in brushed stainless steel and black finishes, allowing coordination with surrounding metalwork and counter materials.
The Perrine countertop mounted bracket in black finish from Federal Brace provides a defined 6 inch elevated bar height, which simplifies planning reception or serving counters with a consistent offset. With a 10 inch upper plate capable of supporting an 18 inch deep elevated top and a 500 pound carry capacity, it suits heavy stone or glass bar constructions that need robust vertical support from a compact footprint. The teardrop foot plate, single 0.5 inch countersunk hole, and 0.25 inch material thickness combine into a straightforward, sturdy bracket that aligns with workstation and countertop bracket applications.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FB31504 Mfr# 31504 | 2" x 10" Perrine Counter Mounted Bar Support, Stainless Steel Finish |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FB39974 Mfr# 39974 | Counter Mount Bearing Plate Kit, Galvanized Finish |