2" x 10" Foremont Counter Mount Support, Brushed Stainless

Foremont Counter Mount Support For Elevated Counters

Foremont counter mount support is a surface mounted bracket from Federal Brace designed to elevate a shelf or bar above a sub countertop, so you can build reception counters, breakfast bars, or similar raised work surfaces from a solid base. The 2 inch by 10 inch top plate length is described as 10 long to support up to an 18 inch deep counter, which spreads the load across the surface so elevated sections stay stable under use. The Foremont support mounts directly to the top of a sub countertop, creating a rigid connection that ties the raised counter back into the main structure. Each support is rated to hold 500 pounds, which provides substantial capacity for stone, wood, or other heavy counter materials in busy areas. The material thickness of 0.25 inch gives the bracket a solid cross-section, which contributes to stiffness when the bar is loaded.

Key Foremont Bracket Details That Drive Job Value

• The Foremont counter mount support is part of the workstation and countertop brackets class, which fits projects where a raised serving or work surface needs to be tied into an existing counter structure for a clean, integrated result.
• The top plate length is described as 10 long to support up to an 18 inch deep counter, letting you size elevated sections confidently within that depth range so overhang and weight stay supported across the span.
• Each Foremont support carries up to 500 pounds, so multiple brackets can be used along a run to hold substantial loads from stone, wood, or composite tops in commercial or residential counter applications.
• The bracket uses 0.25 inch thick material, which gives the arm and plate the rigidity needed to resist flex under typical countertop loads, helping elevated bars feel solid when people rest weight on them.
• The Foremont bracket is produced in brushed stainless steel, providing a finish that visually suits many modern counter designs while also presenting a smooth surface where the bracket remains visible in finished installations.
• Two 0.26 inch countersunk holes are provided in the bracket, so flat-head fasteners can sit flush to the surface, allowing the mounted plate to present a smoother interface with the counter materials during installation.

Installation And Mounting Approach For Foremont Support

The Foremont counter mount support is designed to be mounted on the surface of a sub countertop, so the bracket works as a visible structural element tying the elevated shelf or bar back into the supporting structure. The installation uses a drop through bolt application, which means a hole is drilled in the sub counter for a bolt that pulls the bracket tight against the surface, locking the bracket and counter together. The manufacturer specifies that holes are drilled into granite, wood, or stone countertop materials to fit a 0.25 inch diameter flat head bolt, and this defined diameter helps match the bracket and hole for a snug mechanical connection. Two 0.26 inch countersunk holes in the bracket accept these flat head bolts, so the bolt heads sit recessed into the metal and create a more even bearing surface against the sub countertop.

How This Foremont Counter Support Works In Use

Where The Foremont Mount Support Is Typically Applied

The Foremont elevated countertop bracket is described as perfect for creating a reception counter or breakfast bar, so it fits projects where a secondary counter level needs to rise above an existing base counter. The bracket is classified under workstation and countertop brackets, aligning it with applications where work surfaces or serving ledges must be structurally supported rather than only decorative. The top plate is described as 10 long to support up to an 18 inch deep counter, so elevated sections within that depth range can be anchored directly to the bracket plate, letting fabricators plan bar widths and layouts around this support geometry. Because the Foremont mounts directly to the top of a sub counter and works with granite, wood, or stone countertop materials, it suits mixed-material layouts where a consistent mounting approach is needed across different surface types in the same run.

Details That Support Repeatable Countertop Results

The Foremont counter mount support uses 0.25 inch thick material, giving the structural arm enough section to limit deflection, which helps repeated installations feel uniformly solid when users lean or rest items on the elevated bar. Each support is rated for 500 pounds, and this defined carry capacity gives planners a clear number to work with when spacing brackets along a counter run so loads stay within the rating. Two 0.26 inch countersunk holes in the bracket are sized to pair with 0.25 inch diameter flat head bolts, which creates a close mechanical fit that keeps the bracket tight against the sub countertop once torqued. The brushed stainless steel finish provides a finished appearance where the bracket remains visible below or beside the elevated surface, so multiple brackets along a line present a unified look in reception or kitchen settings.

Common Foremont Counter Mount Support Questions

Select This Foremont Support For Elevated Counters

The Foremont counter mount support from Federal Brace pairs a 2 inch by 10 inch top plate with 0.25 inch thick construction to create a rigid bracket for elevated shelves or bars. Its 500 pound carry capacity and 10 inch plate supporting up to an 18 inch deep counter help plan reception counters, breakfast bars, and similar raised sections with clear structural parameters. With a brushed stainless finish and defined 0.26 inch countersunk holes for 0.25 inch flat head bolts, this bracket offers a consistent mounting interface for granite, wood, or stone sub countertops.