2" x 10" Foremont Counter Mount Support, Black

Foremont Counter Mount Support For Elevated Counters

Foremont Counter Mount Support is a surface-mounted bracket that elevates a shelf or bar above a sub countertop, so you can build reception counters, breakfast bars, and similar raised work surfaces with a defined standoff from the base counter. This Federal Brace support uses a top plate that is 10 inches long to carry counters up to 18 inches deep, giving solid bearing across a practical bar-width overhang. Each support is rated to hold 500 pounds, so multiple brackets can share significant static loads along a run when laid out properly under a counter. The Foremont design mounts directly to the top of a sub countertop, creating a rigid connection between the base counter and the elevated top. The bracket is finished in black, so it blends into dark stone or wood designs and keeps the structure visually clean in exposed installations.

Key Foremont Details That Support Your Build

• The top plate length of 10 inches supports counters up to 18 inches deep, which lets you span common bar and reception overhangs without extending the bracket excessively beyond the mounting footprint.
• A 500 pound carry capacity per support allows you to plan bracket spacing for heavy stone or composite counter materials while maintaining a wide safety margin for static loading in normal use.
• Surface mounting to a sub countertop ties the Foremont bracket directly into the base structure, which helps keep the elevated shelf or bar aligned with cabinetry and underlying framing.
• The Foremont elevated countertop bracket uses a material thickness of 0.25 inch, providing a robust section that resists flex under load and keeps the raised counter feeling solid to the touch.
• Two 0.26 inch countersunk holes in the top plate accept flat head fasteners, so bolt heads sit flush and allow the finished elevated counter to bed down tightly against the bracket.
• The black finish option matches the Federal Brace description and supports dark design schemes, helping the structural elements recede visually under stone, wood, or composite tops.

Mounting And Drilling Details For Foremont Support

The Foremont counter mounted support is designed to be mounted on the surface of a sub countertop, so the bracket sits directly between the base counter and the elevated bar or shelf. The installation is described as a special install, because it relies on a drop through bolt application to connect through the sub counter. A hole in the sub counter is required to fit a 0.25 inch diameter flat head bolt, which passes through the surface into the Foremont bracket. The mounting pattern uses two 0.26 inch countersunk holes in the support, so properly sized flat head bolts seat into the bracket and allow the elevated counter material to rest flat on the top plate.

How This Workstation And Countertop Bracket Performs

Where The Foremont Counter Mount Support Is Used

The Foremont counter mounted support by Federal Brace is described for reception counters and breakfast bars, so it fits projects that need an elevated front ledge above a main work surface. As a workstation and countertop bracket, it installs on the surface of a sub countertop, placing the structural member where casework and framing are already present. The top plate, at 10 inches long, is specified to support counters up to 18 inches deep, covering many elevated bar configurations without extending beyond typical overhang limits. With a 500 pound carry capacity for each support, this bracket can be planned for heavy granite, wood, or stone countertop materials in reception, kitchen, or similar applications. The 6 inch size listed in the data defines the bracket variant, allowing you to match height requirements across multiple supports in the same run. The black finish works with dark cabinetry and surfaces so the support remains visually understated in open layouts.

Why Foremont Details Matter For Load And Alignment

The 0.25 inch material thickness used in the Foremont elevated countertop bracket gives the arm and mounting plate a solid section, which helps reduce deflection under the rated 500 pound load and keeps the elevated counter feeling stable in daily use. Mounting directly to the top of a sub countertop ties the bracket into an existing structural layer, so the elevated shelf tracks the same alignment as the base counter and cabinetry. The 0.26 inch countersunk holes are sized for 0.25 inch diameter flat head bolts, allowing the fasteners to nest into the bracket while still developing full clamping force through the sub counter. A drop through bolt application connects the elevated counter, bracket, and sub countertop in one stack, forming a through-bolted assembly rather than relying only on surface friction. Because the bracket is identified as a workstation and countertop bracket, it is built to support repetitive loading in service spaces where people lean, rest items, or work along the elevated edge.

Common Foremont Counter Support Buyer Questions

Choose This Foremont Support For Elevated Counters

The Foremont Counter Mount Support by Federal Brace combines a 10 inch top plate, 0.25 inch material thickness, and 500 pound carry capacity into a bracket built for elevated reception counters and breakfast bars. Surface mounting to a sub countertop, with 0.26 inch countersunk holes for 0.25 inch diameter flat head bolts, ties the elevated shelf into the same structure as the base counter. The black finish and workstation and countertop bracket classification make this Foremont model a practical option when planning raised ledges over granite, wood, or stone tops. Select this 6 inch Foremont elevated countertop bracket when your layout calls for a defined standoff and known load support along the front of a counter.