12" x 20" Alpine Bar Top Support, Stainless Steel Finish

Alpine Bar Top Support For Elevated Counters

Alpine bar top support from Federal Brace is a workstation and countertop bracket designed to elevate and hold a bar or counter above a subcounter. This 12 inch by 20 inch Alpine counter support installs on a base cabinet, so the bracket ties directly into the cabinet structure for a solid bar top extension. The design creates a raised bar that works well for eat-in kitchens where a higher serving or seating surface is desired. The Alpine elevated counter support is built from 0.25 inch thick material, giving the bracket the strength needed for substantial bar or counter loads. With a carry capacity of 500 pounds each, a properly planned layout can support heavy countertop materials while maintaining a clean, open space beneath the overhang. This model also serves in workstation applications where an elevated surface over an existing counter is required.

Key Alpine Counter Support Details That Matter

• The 12 inch by 20 inch size creates a substantial bearing surface under the bar top, which helps distribute weight and reduce flex in the elevated counter section during everyday use.
• A carry capacity of 500 pounds each allows the bracket to handle dense countertop materials, which supports confident use in busy kitchen or work areas with frequent loading.
• The Alpine model supports a counter depth from 14 to 20 inches, so installers can use it for a range of overhang designs without changing bracket style between typical bar top depths.
• Three 0.26 inch straight mounting holes are provided in the bracket, giving clear fastening points that simplify layout when tying the support into the base cabinet structure.
• A stainless steel finish option provides a finished appearance for visible installations, which suits open kitchen plans where the support hardware remains in view under the bar.

Installation And Cabinet Mounting Use Cases

This Alpine counter support installs directly to the base cabinet, so the load from the elevated bar transfers into the cabinet frame rather than the wall alone. The three 0.26 inch straight mounting holes provide fixed locations for fasteners, which helps maintain consistent bracket positioning along a run of cabinets. Installation can be done during new construction, allowing the support to be integrated into the cabinet layout, or it can be added later in a remodel or retrofit when an elevated counter is being added to an existing kitchen. The Alpine bracket is designed to support a 14 to 20 inch deep counter, so once mounted, the installer can align the overhang within that range and maintain adequate bearing. The 0.25 inch thick material provides rigidity, which helps the elevated counter feel solid under normal use.

How This Alpine Support Works In Real Projects

Using The Alpine Support In Kitchens

The Alpine bar top support by Federal Brace creates a dramatic bar for eat-in kitchens by elevating a counter above an existing subcounter. By installing on the base cabinet, the bracket uses the cabinet body as its foundation, which suits island and peninsula layouts where wall framing is not available at the overhang edge. The Alpine counter support is part of the workstation and countertop brackets class, so it is intended for structural support of work and serving surfaces rather than light shelving. When used under a 14 to 20 inch deep counter, the 12 inch by 20 inch form of the bracket provides coverage under a significant portion of the overhang, improving stability along the edge where people sit or stand. The stainless steel finish option also works in kitchens where exposed hardware is part of the design, allowing the bracket to function as both support and visible component.

Details That Support Load Capacity And Stability

The Alpine elevated counter support is manufactured with 0.25 inch thick material, which provides section strength for holding an elevated counter or bar over a subcounter. This thickness helps the bracket resist bending when subject to typical bar top loading. The stated carry capacity of 500 pounds each gives a clear load reference per bracket, which helps installers plan the number and spacing of supports under heavy countertop materials. The three 0.26 inch straight mounting holes are sized to accept common structural fasteners, and their straight alignment simplifies marking and drilling through the base cabinet members. The design of the Alpine elevated counter support focuses on providing enough strength to elevate and hold the counter securely over time. When aligned with a 14 to 20 inch deep counter, the bracket geometry allows the load to transfer back toward the cabinet face, supporting a firm feel at the bar edge.

Common Questions About Alpine Bar Top Support Use

Selecting This Alpine Support For Your Project

The Alpine counter support 12x2x20 stainless configuration from Federal Brace provides a defined solution when an elevated counter or bar is needed over a subcounter. With its 12 inch by 20 inch size, 0.25 inch thick material, and 500 pound carry capacity, the bracket is built for structural bar and workstation use. Mounting on the base cabinet and supporting 14 to 20 inch deep counters, it fits common kitchen bar layouts without changing bracket style between similar projects. For projects calling for a stainless steel finish and a purpose-built elevated counter support, this Alpine bar top support aligns closely with real installation and load requirements.