Anthem Hidden Corner Overhang Support For Countertops

Anthem Hidden Corner Overhang Support is designed to support the overhang in the corner of your cabinet base so the longest span on an island countertop gets dedicated reinforcement. This 14 x 2 support from Federal Brace mounts inside the corner of the base cabinet and extends out under the corner of the countertop, creating concealed support where traffic and load often concentrate. As a workstation and countertop bracket, it is built for use under thick granite, quartz, marble, other natural stones, and concrete countertops, giving solid backing to heavy tops in demanding residential or commercial layouts. The 14 inch arm length pairs with a 6.50 inch inside leg dimension, giving a balanced footprint that fits typical cabinet corner geometry while still projecting far enough to reach under the overhang you are planning to carry.

Key Corner Support Details That Drive Performance

• The bracket is specified as a 14 x 2 Anthem Hidden Corner Overhang Support, so it provides a defined 14 inch support arm that reaches under the countertop corner, helping transfer loads back into the cabinet structure where the carcass can carry them.
• As part of Federal Brace workstation and countertop brackets, this corner support is purpose-built for countertop loads, which means the geometry and mounting layout are tuned for stone and concrete tops where overhang reinforcement is critical in service.
• The black powder coat finish gives the bracket a dark, uniform appearance that visually recedes under the top, so the support works unobtrusively in open-knee or seating areas while still matching other dark hardware when the underside is visible.
• A material thickness of 0.25 inch means the steel section has substantial cross-section, which resists bending under heavy overhang loads and helps keep the countertop feeling solid during everyday use and occasional higher point loads.
• The bracket carries up to 375 pounds each when installed per installation guidelines, so a run of multiple brackets can be planned to carry significant stone or concrete mass while maintaining a margin for people leaning or working at the corner.
• Four 0.26 inch straight holes in the mounting leg give fixed, repeatable fastening points into the cabinet base, helping align the bracket consistently from unit to unit and spread loads across several fastener locations in the corner.

Hidden Corner Countertop Support Mounting Approach

The Anthem Hidden Corner Overhang Support mounts to the inside corner of the cabinet base, so the vertical and horizontal legs bear directly against the cabinet walls where material is strongest. From that corner, the support arm extends underneath the corner portion of the countertop, putting steel directly under the overhang that would otherwise rely only on the stone or substrate. By using a corner-mounted hidden bracket rather than exterior bracing, the design keeps legroom and access clear under islands and work surfaces while still channeling overhang forces back into the cabinet carcass where they can be carried down to the floor.

Using This Federal Brace Support In Real Projects

Where This Hidden Corner Bracket Works Best

This Anthem Hidden Corner Overhang Support is specified for the corner of your cabinet base, so it suits island or L-shaped layouts where a stone or concrete top turns a corner and creates a long diagonal overhang. The 14 inch support arm length gives meaningful reach under the countertop corner, which is important when that corner is one of the longest parts of an island overhang and is subject to seating, leaning, or working loads. Because these brackets allow you to safely mount thick granite, quartz, marble, other natural stones, and concrete countertops, they integrate naturally into higher-end kitchens, bars, and work surfaces using heavy surfacing materials. The 14 x 2 format also coordinates with other Anthem sizes - 12 x 6.50 and 17 x 6.50 - so a layout can be designed around consistent geometry while varying reach where spans change.

Details That Support Repeatable Countertop Installations

The 0.25 inch material thickness gives each Anthem Hidden Corner Overhang Support a robust section, which helps installers rely on predictable stiffness when setting multiple brackets under a corner; matching deflection across brackets keeps the countertop bearing evenly. Each bracket has a carry capacity of 375 pounds when installed per installation guidelines, so calculating bracket count along a run becomes straightforward for standard stone and concrete thicknesses. The four 0.26 inch straight holes create a clear fastening pattern into the cabinet base, which aids in marking, drilling, and driving fasteners consistently from project to project. The black powder coat finish protects the bracket surface and presents a clean look under overhangs, which matters in open island designs where the underside of the countertop and cabinet interior can be seen from certain angles.

Common Questions About Anthem Hidden Corner Support

Select This Anthem Support For Corner Overhangs

This 14 x 2 Anthem Hidden Corner Overhang Support from Federal Brace pairs a 14 inch reach with a 0.25 inch thick, black powder coated bracket that mounts at the cabinet base corner. With a 375 pound carry capacity each and four 0.26 inch straight mounting holes, it is set up for repeatable installs under thick granite, quartz, marble, other natural stones, and concrete countertops. Use this corner support where an island or L-shaped top needs concealed reinforcement at the longest corner span.