
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Anthem Hidden Corner Overhang Support is a steel bracket designed to support the overhang in the corner of a cabinet base, so the long corner section of an island countertop has dedicated structural support. This 17 inch x 2 inch Federal Brace support mounts to the inside corner of the cabinet base, then extends under the corner of the countertop where standard straight brackets do not reach. The bracket is part of the workstation and countertop brackets class, so it is built specifically for heavy horizontal loads. A 0.25 inch material thickness gives the support a solid steel cross-section that resists bending under stone tops. The black powder coat finish provides a dark, unobtrusive appearance that visually blends under most tops while also protecting the bracket surface. With this configuration, installers gain a purpose-built corner solution instead of improvising with linear supports.
This Anthem Hidden Corner Overhang Support is designed to mount at the inside corner of a cabinet base, which positions the bracket where the countertop corner actually needs bearing. Four 0.26 inch straight holes in the bracket create defined attachment points, giving installers repeatable fastener locations into cabinet structure. The 17 inch x 6.50 inch geometry places steel well out under the corner overhang, distributing load across both cabinet faces that form the corner. Because the bracket supports up to 375 pounds each when installed per installation guidelines, multiple supports can be laid out across an island run to share heavy stone or concrete loads. The 2 inch width helps the bracket sit flush against cabinet surfaces, improving contact and minimizing rocking as fasteners are tightened.
The Anthem Hidden Corner Overhang Support is specifically designed to support the overhang in the corner of a cabinet base, which is often one of the longest parts of an island countertop. By mounting to the inside corner of the base, the bracket ties into both cabinet runs that meet at the corner, so the corner overhang is carried by intersecting cabinet structure instead of just one side. Its 17 inch x 6.50 inch size allows the arm to extend under the corner part of the countertop, putting steel directly under the area that sees concentrated loads from everyday use. The support is recommended for thick granite, quartz, marble, other natural stones, and concrete countertops, making it suitable for kitchens, workstations, and similar heavy-surface installations. The 0.25 inch thick material helps the bracket function as a true structural member in these applications. The black finish helps it visually recess under dark or shadowed cabinet interiors.
The 375 pound carry capacity for each Anthem Hidden Corner Overhang Support, when installed per installation guidelines, means a single bracket can handle substantial dead load from stone tops plus typical live loading in the corner area. Four 0.26 inch straight holes give consistent locations for fasteners, so installers can repeat a proven pattern from project to project and align brackets with cabinet framing. The recommendation to use a countertop support that extends to within 4 inches of the edge of the countertop explains the 17 inch reach: the arm length is set so steel runs close to the edge, reducing leverage on the stone and limiting risk of corner cracking under use. The 2 inch wide profile and 6.50 inch leg dimension help seat the bracket firmly along cabinet faces, improving load transfer into the box. Being part of a workstation and countertop brackets class, the bracket is intended to act as engineered support rather than decorative hardware, which helps limit deflection and movement over time. The black powder coat finish maintains the bracket surface while keeping reflections low inside the cabinet corner.
The Anthem Hidden Corner Overhang Support is designed to support the overhang in the corner of a cabinet base, so corner sections of island and cabinet countertops have direct structural support.
The Anthem Hidden Corner Overhang Support easily mounts to the inside corner of the cabinet base, so its legs bear against both cabinet runs forming the corner for better load transfer.
The Anthem Hidden Corner Overhang Support is recommended for safely mounting thick granite, quartz, marble, other natural stones, and concrete countertops in typical kitchen or workstation layouts.
Each Anthem Hidden Corner Overhang Support can hold up to 375 pounds when installed per installation guidelines, allowing heavy stone or concrete tops to be supported in the corner zone.
This Federal Brace Anthem Hidden Corner Overhang Support has a 17 inch x 6.50 inch size with a 2 inch width and 0.25 inch material thickness, giving substantial reach and structural depth.
The Anthem Hidden Corner Overhang Support has four 0.26 inch straight holes, providing defined fastener locations that support repeatable cabinet corner installations across multiple projects.
The Anthem Hidden Corner Overhang Support from Federal Brace gives cabinet builders and installers a dedicated way to support the overhang in the corner of a cabinet base, especially on long island corners. Its 17 inch x 2 inch arm and 0.25 inch material thickness provide real steel under the corner part of thick granite, quartz, marble, other natural stones, and concrete countertops. With a 375 pound carry capacity each when installed per installation guidelines, this workstation and countertop bracket helps translate cabinet structure into dependable corner support. For projects where corner spans see heavy use, this black finish hidden support offers a practical, purpose-built solution.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FB40246 Mfr# 40246 | 12" x 2" Anthem Hidden Corner Overhang Support, Black Finish | ||||
Sold in: 1 Each | FB40248 Mfr# 40248 | 14" x 2" Anthem Hidden Corner Overhang Support, Black Finish |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FB39972 Mfr# 39972 | Standard Brace Fastener Kit, Stainless Steel Finish | ||||
Sold in: 1 Each | FB39973 Mfr# 39973 | Standard Brace Fastener Kit, Zinc Finish |