Loft Oak Edgebanding 24mm x 1mm, 600 FT

Loft Oak Edgebanding 24mm x 1mm For Clean Edges

Loft Oak edgebanding 24mm x 1mm gives you a dedicated edge treatment sized for panels needing a 24mm wide band, so exposed board edges get a consistent Loft Oak look on cabinets and fixtures. The 1mm thickness provides a substantial edge layer, which supports a solid visual transition from surface to edge on woodworking projects. As PVC edge banding, it is part of the Edgebanding & Surfacing product group, so it integrates naturally wherever you are finishing raw panel edges. The Loft Oak design helps tie edges to Loft Oak panel faces, keeping color and pattern aligned across doors, drawer fronts, and casework. This roll format lets you run longer edges in single passes, which is helpful on production runs or matching multiple cabinets in the same project.

Key Loft Oak Edgebanding Details For Projects

• This Loft Oak edgebanding is 24mm wide, matching panels that call for that width so installers can cover the edge in one pass without trimming for width, which helps keep runs consistent on cabinet sides and tall panels.
• The 1mm thickness creates a noticeable edge layer that helps bridge from panel face to edge, which is useful where a more substantial edge profile is preferred over ultra-thin bands in high-visibility locations.
• The roll length is 600 FT, providing enough material to run multiple cabinets or a larger job from a single roll, which supports color continuity and reduces changeovers during edging work.
• This product is identified as Edge Banding in the Edgebanding & Surfacing category, which means it is intended specifically for covering exposed board edges in cabinet, furniture, and general woodworking applications.
• The manufacturer is Rehau, Inc., giving shops a consistent Loft Oak pattern under a known brand, which helps maintain the same appearance when repeating jobs or servicing existing installations.

Loft Oak Edgebanding Dimensions That Support Fit

The 24mm width of this Loft Oak edgebanding targets panel edges that are laid out for that specific band size, so it suits layouts designed around a 24mm band rather than narrower strips. With a 1mm thickness, the band provides an edge layer that can be machined or flushed as part of standard woodworking processes, while still presenting a defined Loft Oak edge line. Being PVC edge banding, it belongs in the Edgebanding, PVC class, which aligns it with common edge-banding workflows used in cabinet shops and millwork operations. The 600 FT length on the roll is sized for shops that need to edge multiple components in Loft Oak without changing rolls frequently during a production sequence.

How Loft Oak Edgebanding Fits Woodworking Workflows

Using Loft Oak Edgebanding In Cabinet And Panel Work

This Loft Oak edgebanding 24mm x 1mm, 600 FT is aimed at woodworking tasks where exposed panel edges need a Loft Oak finish to coordinate with matching surfaces. As Edge Banding in the Edgebanding & Surfacing category, it is used on cabinet boxes, shelving, furniture components, and similar projects to cover raw substrate edges. The Loft Oak look helps installers carry the same visual across doors, drawer fronts, and case sides when those pieces share a Loft Oak theme. Because it is PVC, it falls into the Edgebanding, PVC product class, fitting into setups already using PVC banding on edge-banding machines. The 600 FT length supports longer production runs in the same color, which is helpful when multiple casework pieces must match throughout a room or project.

Why The 24mm x 1mm Format Matters In Use

The 24mm width of this Rehau Loft Oak edgebanding simplifies jobs that are dimensioned around that band size because it can cover the full edge width in one pass, supporting a clean alignment between the face material and edge. The 1mm thickness adds a more substantial edge than ultra-thin tape, giving the band enough material for typical flushing and finishing steps during cabinet construction. Identified by manufacturer part number 315431-058, the product can be specified repeatedly for follow-up orders when a shop wants to match the same Loft Oak edge across phases of a project. As a PVC edge banding from Rehau, Inc., it fits into workflows that standardize on PVC for consistent machining characteristics, which can streamline setup across multiple edging jobs using this Loft Oak design.

Common Questions About Loft Oak Edgebanding 24mm x 1mm

Select Loft Oak Edgebanding For Matching Edges

Choose Loft Oak edgebanding 24mm x 1mm, 600 FT when a project calls for a 24mm wide Loft Oak edge treatment that aligns with Loft Oak surfaces. The 1mm thickness and PVC construction place it firmly in the Edgebanding, PVC class used throughout cabinet and furniture shops. With Rehau, Inc. as the manufacturer and part number 315431-058, it provides a defined Loft Oak option that can be specified consistently across new installations and follow-on work.