PVC Loft Oak edgebanding is a 3mm thick PVC Loft Oak Flex strip in a 15/16 inch width designed to cover and protect raw substrate edges. The 3mm thickness builds a solid edge profile that stands up well in everyday cabinet and furniture use. The 15/16 inch width gives coverage across common 3/4 inch panel thickness with allowance for trimming to a precise flush finish. The 300 FT length is configured for production runs, so shops can work multiple cabinets or panels from a single roll without frequent changeovers. The Loft Oak design provides a coordinated appearance with Loft Oak surfaces, supporting consistent visual alignment across doors, drawer fronts, and casework. Being PVC, this edge banding works as a practical surfacing solution where a durable, easy-to-clean edge is needed along interior or exterior panel edges in woodworking projects.
This PVC Loft Oak Flex 3mm thick, 15/16 inch width x 300 FT edge banding is sized to work along straight panel edges where a Loft Oak appearance is desired. The 3mm thickness allows fabricators to shape or ease the edge after trimming, giving projects a more substantial feel. With 15/16 inch of coverage, installers can position the banding over the substrate edge and still have room to trim both sides for a clean, square result. The continuous 300 FT coil format supports edge banding workflow on cabinet runs, closet components, or furniture panels that share the Loft Oak look, helping maintain alignment of color and pattern from piece to piece.
The PVC Loft Oak Flex 3mm thick edge banding is designed for use wherever a Loft Oak edge is required on boards or panels. The 3mm thickness creates a solid-feeling edge that can transition smoothly from face material to edge, which is useful on doors, drawer fronts, and exposed cabinet ends. With a 15/16 inch width, the banding spans the full edge of typical panel constructions and allows trimming for a crisp, square profile on both faces. The Loft Oak design aligns visually with Loft Oak surfaces, so when installers run this banding down multiple components, the project presents a unified appearance across verticals, horizontals, and shelving. The 300 FT length lets shops set up and run a series of parts with the same roll, supporting consistent edge quality across an entire Loft Oak job.
The 3mm thickness of this PVC Loft Oak Flex banding gives fabricators enough material to trim, flush, and lightly profile the edge without cutting through, which supports repeatable results from part to part. The 15/16 inch width adds working tolerance around standard panel thicknesses, letting installers position the banding confidently and then trim back to an accurate line, reducing rework from misalignment. Because the material is PVC, the edge surface stays consistent along the entire 300 FT run, helping shops hold the same appearance and feel across every component that uses the banding. The defined dimensions and Loft Oak design mean that once machinery is dialed in for this 15/16 inch by 3mm profile, operators can run similar jobs with predictable setup and dependable edge quality.
The edgebanding is 3mm thick and 15/16 inch wide, which covers standard panel edges and provides enough material to trim for a clean, consistent finished edge.
The PVC Loft Oak Flex roll is 300 FT long, so shops can run multiple cabinets or panel components from a single coil during a project.
This edge banding is made from PVC, providing a practical surfacing material that suits everyday cabinet and furniture environments.
This PVC Loft Oak edgebanding is used on panel edges where a Loft Oak appearance is required, such as cabinet components, furniture panels, and similar woodworking projects.
The 302596-032 part number identifies this specific Rehau, Inc. PVC Loft Oak Flex 3mm thick, 15/16 inch width x 300 FT edge banding product.
The 3mm thickness provides enough PVC material for trimming and light profiling, which helps create a solid-feeling, consistent edge on cabinet and furniture components.
The PVC Loft Oak Flex 3mm thick, 15/16 inch width x 300 FT edge banding from Rehau, Inc. offers defined dimensions and a Loft Oak design for coordinated woodworking projects. For jobs built around Loft Oak surfaces, this edge banding lets shops carry that look across doors, fronts, and casework edges. The 3mm thickness and 15/16 inch width support a repeatable trimming workflow, while the 300 FT length suits production runs. Add this Loft Oak PVC edge banding to projects that call for a unified Loft Oak finish along exposed panel edges.
Sold In: 1 Roll