Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding PVC Loft Oak 1.2mm identifies this Rehau, Inc. PVC edge banding as a Loft Oak design, which gives casework and panels a coordinated edge treatment that visually ties into Loft Oak surfaces for consistent project appearance across all visible edges. The 1.2mm thickness creates a substantial PVC layer that helps visually cover the core material at the edge, which matters when working with exposed cabinet or furniture sides where a thin edge can highlight substrate variations. The 15/16 inch width is sized to cover standard panel thicknesses in this range while allowing a small trim margin, so installers can process edges and flush-trim back to the face without chasing a short edge strip. The 600 foot length provides a continuous supply for production runs or multi-cabinet jobs, which reduces changeovers and keeps edgebanding work moving on a predictable rhythm.
The 15/16 inch width on this PVC Loft Oak edgebanding provides room to align the tape slightly proud of both faces before trimming, which helps installers cut back to a clean, straight edge without exposing the core. The 1.2mm thickness works well with common trimming, routing, or scraping methods because the material presents a solid edge to cutting tools, which supports a smooth transition from panel face to edge band. The 600 foot length keeps material handling straightforward on jobs with repeated edge runs, since a single roll can be fed through edge banding equipment or manual setups for many parts before a roll change is needed. The Loft Oak design helps each finished edge read as part of the same Loft Oak surface system, which simplifies layout decisions around exposed edges on cabinets or furniture pieces.
This Edgebanding, PVC Loft Oak 1.2mm Thick, 15/16 inch Width x 600 FT is suited to cabinet, furniture, and panel edges that are designed around a Loft Oak visual. The Loft Oak description on this edge banding ties directly to that appearance, which helps projects that use Loft Oak-faced components maintain the same tone at every visible edge. The 15/16 inch width allows use on edges in that general thickness range where a modest overhang is preferred, which fits common cabinet side and shelf edges that are processed through typical edge banding equipment. The 600 foot length on the roll favors shop environments running multiple parts in sequence, where staying on a single Loft Oak roll keeps color and design continuous from the first piece to the last. The PVC construction aligns with the Edgebanding, PVC category, which fits standard shop workflows built around PVC trimming, scraping, and finishing.
The 1.2mm thickness on this Loft Oak PVC edge banding gives installers enough material to form a defined edge, which helps routing and scraping tools track consistently along the band without tearing through to the substrate. The 15/16 inch width provides coverage beyond the panel edge while staying close to typical panel dimensions, which supports efficient trimming and minimizes excess removal during finishing passes. The 600 foot length reduces interruptions to rethread or change rolls, so production can run longer Loft Oak sequences without reset time between cabinets or panels. The defined Manufacturer Part # 315608-066 clearly identifies this exact Loft Oak, 1.2mm thick, 15/16 inch width x 600 FT product, which matters when shops want to reorder the same edge banding for future phases or matching repair work. Together, these details support repeatable edging results on Loft Oak projects.
This edgebanding is 1.2mm thick, 15/16 inch wide, and supplied in a 600 foot length, which suits typical cabinet and panel edge runs built around that width range.
The 1.2mm thick PVC edge gives trimming tools a solid profile to cut, which supports clean flush-trim passes and helps create a smooth transition from face to edge on panels.
The 15/16 inch width is useful on panel and cabinet edges in that size range, allowing slight overhang for trimming so edges can be finished flush without exposing the core.
The Loft Oak design lets the edge visually match Loft Oak surfaces, which helps cabinets, shelves, and panels present a unified Loft Oak appearance along all visible edges.
The 600 foot length supports longer production runs on edge banding equipment, allowing multiple parts or cabinet sets to be edged in Loft Oak before switching rolls.
Manufacturer Part # 315608-066 identifies this specific Rehau PVC Loft Oak edgebanding in 1.2mm thickness, 15/16 inch width, and 600 foot length for consistent reordering.
This Edgebanding, PVC Loft Oak 1.2mm Thick, 15/16 inch Width x 600 FT provides a defined PVC edge sized for common panel work, with a Loft Oak design that aligns with Loft Oak-faced components. The 600 foot roll length gives shops and serious DIY users enough material to handle multi-piece runs where every exposed edge needs the same Loft Oak look. For projects built around a Loft Oak visual and panels in this width range, this Rehau, Inc. edge banding offers an identified part that can be specified and reordered by its 315608-066 designation.
Sold In: 1 Roll