Kessebohmer Bottom Mount Waste Pullout For Base Cabinets

Kessebohmer bottom mount waste pullout gives a dedicated waste station for base cabinets, so trash storage stays organized and concealed inside the cabinet run. This unit is designed for 15 inch and 18 inch base cabinets, so it fits common kitchen layouts in both new installs and remodel work. The 12.25 inch wide frame for the 28 quart size sets a defined footprint in the cabinet, which simplifies planning cabinet interior clearances around plumbing or other hardware. The 22 inch depth dimension positions the frame along the cabinet floor from front to back, so slide travel uses the full opening for bin access. The 10 inch frame height keeps the 28 quart bins supported without interfering with typical drawer headings, so the system works well behind standard doors. Two 28 quart grey bins give separated capacity in one pullout, so installers can allow for waste and another stream in the same cabinet footprint.

Key Trash Pullout Details That Save Time

• The 28 quart frame size of 12.25 inches wide, 22 inches deep, and 10 inches high gives fixed dimensions, so layout inside a 15 inch or 18 inch base cabinet can be planned accurately before drilling or setting adjacent hardware.
• Two 28 quart grey bins supply substantial volume in a compact footprint, so a single door cabinet can handle regular household trash and another waste stream without changing the exterior cabinet design.
• The self-open and soft-close function built into the frame slides controls the pull and return, so the unit moves smoothly and settles without slamming, which supports long-term cabinet integrity.
• A 100 lb load rating for the system means the frame and slides are engineered to carry the weight of two 28 quart bins when full, so the pullout operates within a predictable working range.
• Design for both 15 inch and 18 inch base cabinets allows the same BOMWP228AN-GR unit to be specified across different cabinet widths, so shops can standardize on one bottom mount waste pullout in multiple runs.

Bottom Mount Waste Pullout Fit And Mounting Use

This bottom mount trash pullout locates directly on the cabinet floor, so installers work from the base instead of side mounting into the case. The 12.25 inch by 22 inch frame size for the 28 quart version defines where to position the unit in 15 inch and 18 inch base cabinets, so door swing and hinge positions can be coordinated around it. With a 10 inch frame height, the assembly stays low in the opening, so it clears typical face frames and door rails while still supporting the two 28 quart grey bins. The self-open and soft-close slides are integrated with the frame, so once the base mounting position is set, the pullout action is established without separate slide alignment work.

Using This Kessebohmer Waste Pullout In Projects

Where This Bottom Mount Waste System Fits Best

The Kessebohmer 12.25 inch anthracite bottom mount waste pullout with two 28 quart grey bins is designed for 15 inch and 18 inch base cabinets, so it fits common sink bases and standard door cabinets in kitchen and bath layouts. The 28 quart frame size at 12.25 inches wide, 22 inches deep, and 10 inches high gives a compact but defined structure, so it nests cleanly inside the cabinet footprint without requiring changes to cabinet exterior dimensions. Two matching grey 28 quart bins sit in the anthracite frame, so the interior has a consistent look that aligns with contemporary cabinet interiors. A 100 lb load rating supports using both bins for everyday trash and another waste stream, so the same cabinet can cover regular disposal needs in busy household spaces.

Details That Support Repeatable Waste Pullout Results

The self-open and soft-close function built into the frame slides controls the movement of the Kessebohmer bottom mount waste pullout, so door-operated or hand-operated access delivers a consistent feel at the jobsite and over time. Because the 28 quart frame size is fixed at 12.25 inches by 22 inches by 10 inches, installers can set up drilling patterns or jigs around those measurements, so multiple cabinets can be fitted the same way on larger runs. The bottom mount design keeps all forces on the cabinet floor, so side walls stay free for other hardware or storage solutions. The 100 lb load rating lets the system handle the typical weight of two 28 quart grey bins when in daily use, so the pullout motion stays within the intended working range. Matching the BOMWP228AN-GR part number across drawings and orders ties field installation to the specified Kessebohmer bottom mount trash pullout, so shops and installers are working from the same defined product.

Common Questions About This Kessebohmer Waste Pullout

Select This Waste Pullout For Defined Cabinet Fit

The Kessebohmer bottom mount waste pullout with two 28 quart grey bins, part number BOMWP228AN-GR, offers a defined 12.25 inch by 22 inch by 10 inch frame for 15 inch and 18 inch base cabinets. The self-open and soft-close slides, 100 lb load rating, and dual 28 quart capacity give a controlled, repeatable waste solution that integrates cleanly into standard base cabinet openings. For projects needing a dedicated trash station inside a single-door base, this bottom mount trash pullout provides clear dimensions and performance details to specify and install with confidence.