Kessebohmer bottom mount waste pullout with 2-28 quart grey bins is a cabinet-mounted trash system that organizes waste inside base cabinets so the cans move out on slides instead of sitting loose on the floor. The unit is designed for 15 inch and 18 inch base cabinets, so it fits common kitchen layouts where a narrow cabinet needs a dedicated waste area. The 28 quart frame size of 12.25 inches wide by 22 inches deep by 10 inches high keeps the footprint compact while still giving useful capacity for daily kitchen trash. The bottom mount trash pullout design anchors the frame to the cabinet floor, which keeps the load low and stable when the bins are full.
The bottom mount trash pullout frame connects to the cabinet floor, so installers layout mounting positions based on the 12.25 inch by 22 inch footprint in a 15 inch base cabinet. The 22 inch depth dimension lets the frame run nearly the full cabinet interior, which supports the slides over their working length and keeps the bins stable when extended. The 10 inch frame height defines the working vertical space inside the opening, so the pullout sits under typical drawer or countertop structures while still clearing the cabinet door swing. The 100 lb load rating gives a clear performance target for how much trash weight the slide system is engineered to handle in service.
The Kessebohmer 12.25 inch silver bottom mount waste pullout is built around a 28 quart frame size of 12.25 inches wide by 22 inches deep by 10 inches high, so it is suited to 15 inch base cabinet interiors where space is tight but a full-depth pullout is preferred. The design for 15 inch and 18 inch base cabinets means it fits common kitchen cabinet runs at the sink or prep area that share standardized interior widths. The dual 28 quart grey bins give two distinct containers, so a single base cabinet opening can handle both everyday trash and a separate waste stream using the same slide mechanism. The silver frame finish pairs with the grey bins, giving a consistent look when the cabinet is open in a modern kitchen environment.
The self-open and soft-close slide function on the Kessebohmer bottom mount waste pullout controls travel at both the start and end of movement, which helps the bins move out with limited effort and return without slamming against the cabinet front. The 22 inch frame depth supports the slides along a longer run, which helps maintain alignment when the two 28 quart bins are fully loaded toward the front edge. The 100 lb load rating matches the expectation that two 28 quart containers can hold a substantial trash volume without overloading the mechanism. The bottom mounting approach keeps the frame fixed directly to the cabinet floor, which helps resist racking forces when one bin is heavier than the other during daily use.
The Kessebohmer bottom mount waste pullout is designed for 15 inch and 18 inch base cabinets, so it fits standard narrow cabinet openings often used beside sinks or in prep areas.
The 28 quart frame size is 12.25 inches wide by 22 inches deep by 10 inches high, so the interior needs to accommodate this footprint for smooth sliding and full bin clearance.
The bottom mount trash pullout has a 100 lb load rating, so the slide system is engineered to support two 28 quart bins filled with typical household trash weight.
The BOMWP228SV-GR waste bin pullout uses two 28 quart grey bins, so installers can set up dual trash streams within a single cabinet opening.
The self-open and soft-close feature moves the frame with controlled motion, which limits slamming and helps keep the cabinet structure and bin contents stable during frequent operation.
The 36 quart and 52 quart frame size is 15.25 inches wide by 22 inches deep by 10 inches high, which matches wider cabinet interiors that can accept a larger trash capacity.
The Kessebohmer 12.25 inch silver bottom mount waste pullout with two 28 quart grey bins, model BOMWP228SV-GR, lines up with 15 inch and 18 inch base cabinet projects where a dedicated trash zone is needed. The 28 quart frame size and 100 lb load rating tie the system to real cabinet interior dimensions and expected trash weights. For kitchen and bath installers planning a base cabinet waste solution around these measurements, this bottom mount trash pullout offers a defined footprint and motion profile to integrate into the overall layout.
Sold In: 1 Kit
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KE2507917930 Mfr# 2507917930 | Kessebohmer Gray Trash Bins Lids, -2507917930 |